Project: Frankenstripe

As promised, the night shots (if you own the 1984 album, listen to the lead off track while viewing):

Before sanding

After sanding with 220 grit. Looks better, but there's still room for a small bit of improvement.

I'm going to measure the bottom and cut some MDF or possibly order some chromed plexi for a false bottom.

And I didn't get to the front panel as planned, due to a bit of a surprise birthday dinner at the in-laws.

Oh well, there's always tomorrow.

Edit: Just made a banner, it's all the way back on page one.

Plexi time!

Finally got around to knocking out installing the new window. Also ran into a small problem, but nothing the dremel can't take care of!

Haven't decided yet if I want black anodized bolts or not. As pricey as they are, I might just stick with the stainless, as pictured here.

I had no idea that this red was going to be this damn hot! This is gonna look great with the window etchings I've got planned.

I've still to get to work on the front panel, but hey, I'm still having fun with it! Besides, I cannot get this side panel to mount correctly, as I had to have the plex sit flush with the bottom (cheaply done) latches, so I've got to chop on the case a bit more.

:O looks killer keep it up

Did you get the paint problem figured out?

Whenever I'm doing stuff on metal, I'll prime with auto primer (I know lowes has it) that stuff seems to stick to anything. Next I'll do the colors in flat - the flat paints seem to stick to each other better. Then I'll do the clear coat last. Do a clear gloss, and it will make it all gloss. (I've had other things I want to leave flat, so I use an artist's flat clear coat - because regular "flat" gloss seems to come out sort of satin semi-gloss.)

For diffusing those LEDs, you could use a clear piece of plexi, and sand it on one side. Then just four screws or some epoxy should hold it.


This is one crazy banana ->:banana:

Quote:

---

Originally Posted by Aud1073cH

Did you get the paint problem figured out?

Whenever I'm doing stuff on metal, I'll prime with auto primer (I know lowes has it) that stuff seems to stick to anything. Next I'll do the colors in flat - the flat paints seem to stick to each other better. Then I'll do the clear coat last. Do a clear gloss, and it will make it all gloss. (I've had other things I want to leave flat, so I use an artist's flat clear coat - because regular "flat" gloss seems to come out sort of satin semi-gloss.)

For diffusing those LEDs, you could use a clear piece of plexi, and sand it on one side. Then just four screws or some epoxy should hold it.


This is one crazy banana ->:banana:

---

Honestly, I haven't even bothered with trying to replicate the painting issue. I'll be dealing with it soon enough, however, as all that is pretty much left to do is to paint the proper side of the motherboard tray and fix the mess that represents the front panel.

Also, I ran into a bit of a problem with the fan controller--the damn LEDs are BLUE! So now I'll be tearing that apart as well and swapping colors out.

Or I could scratch the fan controller and use it in a different mod, as I've got something in mind that could use blue lighting--we'll just have to wait and see on that.

Thanks for looking, have some rep for the comments and suggestions!

Ground effect lighting, Looks really cool.
Have you considered cutting out multiple circles of red plexi . .and making some lit case feet?

Quote:

---

Originally Posted by Eclecticos

Ground effect lighting, Looks really cool.
Have you considered cutting out multiple circles of red plexi . .and making some lit case feet?

---

I thought about going this route, but to be honest, I'm not sure if that's what I am looking for. Hell, I'm not even sure that the drawer knob approach is what I'm looking for. But for now it will work. I was going to use dice (see pics a couple pages back) but I destroyed the first one that I tried to drill out--cheaply made. Plus, they were too small for what I needed anyways.

I'll continue to look around and see if I can find something that'll work--I kinda like the idea of casters (think bottom of a half-stack amplifier), but that might call for a bit more work than what I'm willing to do, especially now that I've got the LEDs installed.

if ya mount it low enough you wont see those rings if it helps...

LOOKIN SWEET! Awesome mod! Can't wait to see it finished!

+rep

Minor update, no pics, as the subject matter would be very boring. I've applied another layer of bondo to the front panel, this time covering the whole thing in a very thin layer. I'm going to let it cure overnight and do some sanding in the morning before the temps get too high--it got damn hot here today (over 100F), although its supposed to be in the mid 80s tomorrow. Hell, right now it is 77 outside, and it's 12:30 am FFS.