Re: Cherry wood Case with water cooling
Well lets try this again. I made a mistake on the first try.
he new boards will not show the seam that was created when glued and sanded.
The new panels were cut to size.
Then they were routed to produce the panel shape. The bit was too large to take all of the material in one pass, there for I used two 1/4" strips of plastic to aid in this process. Both were connected to the table fence to space out the cutting 1/2" from the fence.
Then you run the panels through the router. You want to start with the end grains first to prevent tear out. Do all four sides of the first panel and then do the next panel.
Then its time to remove one of the plastic strips to let 1/4" more of the cutter to be exposed. Here I'm showing you how I removed one strip without messing up the alignment.
Well you should be getting the picture so to speak as we progress though the router.
Then you do the same thing over again and following the same steps.
Now you have completed the panels lets see if they fit in a mock up of the door.
And they are square too.
All thats left to do is glue and clamp.
Re: Cherry wood Case with water cooling
Dude. You rock. When it comes time to get mine,... I'm a coma knockin. Thanks man.
Re: Cherry wood Case with water cooling
Quote:
Originally Posted by
tribaloverkill
Dude. You rock. When it comes time to get mine,... I'm a coma knockin. Thanks man.
Any time tribaloverkill. Thank you for all your comments.
Re: Cherry wood Case with water cooling
Well here is the final door on the frame. It turned out great.
The great thing is that it is identical to my plan.
Re: Cherry wood Case with water cooling
Wow. I'm speechless. This is a thing of beauty!
Re: Cherry wood Case with water cooling
Quote:
Originally Posted by
Tale Gunner
Any time tribaloverkill. Thank you for all your comments.
Anytime sir. You do great work. I love your talk of accuracy;) I was like, "hell yea!" all throughout reading your post. LOL.
Re: Cherry wood Case with water cooling
Quote:
Originally Posted by
tribaloverkill
Anytime sir. You do great work. I love your talk of accuracy;) I was like, "hell yea!" all throughout reading your post. LOL.
Thanks tribaloverkill. I hope that helped. If you need any more info let me know.
Re: Cherry wood Case with water cooling
That's real professional work....I can't wait to see the finished article!
Very nice!
Ouch!
Re: Cherry wood Case with water cooling
Quote:
Originally Posted by
Ouch!
That's real professional work....I can't wait to see the finished article!
Very nice!
Ouch!
Thank you very much. Its been on the drawing board so to speak for over a year.
Re: Cherry wood Case with water cooling
New Toy for Fathers day!
My wife and family got me a gift certificate from one of my local wood working stores so I purchased a laser alignment for my drill press.