Printable View
Today I have so many pics. I didn't do much but it was very documented today.
First thing on todays agenda was taking out the rivets.
There are alot of rivets. I had to take out like7 for the front and like 6 for the back. Plus the front had like 6 more do the drive bay.
I worked in my laps to take out he drive bay rivets
Time to CUT. Dremel time.
Toke a break to enjoy the out doors.
Now time to drill the holes. I used a broken fan and carfuly alined the holes and put presure on the fan to keep it in place and drill the holes.
All done.
Here is the worlds first 2" mid tower frame. LOL
Today I broke out the bondo and worked on the Chassis. There were a few holes that needed to be filled. Also there are some areas that are shallow and need to be filled.
Here are the two brother before bondo.
Areas that will need to be watched
On the first layer I put allot of bondo. Its because I am going to sand it with a machine so I was a little muddled and excusive
BTW this is what happens to $2000 Cisco router when its gets obsolete.
Today I went out and got a cheap rivetor, some rivets and some plexi glass.
Plexi glass is .220" 24 x 12
Some of the plexi will be used for the side window which I hope to etch, but also for the pump cover.
You know what this means Starbuck. It means I can make you one 1250 pump cover too.
Bondo Time
Front Bezel design
Switch mock-up.
Now back to BF2
Last Night (Nov, 16th), I sanded the Bondo down on the chassis, and the top panel. I found the Bondo on the front chassis worked really well in covering up the fan grill holes. I also used Bondo on the top because the top panel was a little dented in want a nice clean flush look. –
Front Chassis
Back Chassis
Top Panel
This little bezel/lip
My Idea for the Air Cover. Two Bawl’s Bottles. Might turn them into a res. Might not sure yet.
hehe Awsome dude ^^ You seem to know what your doing 8)
Very inspired mod.
Looks like it's been a while since your last worklog update. How is it coming?
man you've got to shoot some video of the knight rider LEDs lol :D looking great! keep it coming!
