Unit 4

drilled holes and sink them

screw improvement

holes for the wc

i know this is off topic but when i already uploaded this picture i coud show it at least(omg this was i guess the worst sentence ev00r xD)

omg its screwed :D

everything in place, but i need to figure out how to hold the rad and the PSU

some bondo

's all

thanks man :)
got a nice idea what i could do with those cable hiding channel things, slideout for the front cover

after "some" filing and "some" jigsawing i finally got 5 of these

and glued on....

thats all :santa:

sorry for the delay but i was sick for 3 days, but i was busy modding today :)
first of, i needed to redo the pump tower, the old one wasnt very straight all :evil: so, new floor and a nee wall

after some cutting

finally got a plexiglass window

and the cover for the PSU

some holes

some filing

in place with PSU in the back

and top cover

:banana: :banana: :banana:

some wood works

even more

more more :D

more mostly more

and some more

mor... w00t :D top cover under side is white now, ready for some modding :rolleyes:

also is the inside

s all :santa:

s'up? no comments? :hurt: :( :(
i hope ill get _some_ with this update ;)
so here it is my new workspace, used for assembling

made some holders for the PSU

countersink screw

PSU backplate

cutout for the cables

like this

hole saw

ownZ

front cover for it, needs a 12cm diameter hole

like this

the under part will be covered by a dumy house

8)

NOT

workspace roundup
store and file

built

assemble

modders lunch

pencil needs to erm.. heck i dunno

drawed this sketch

1. PSU house
2. removable dummy house maybe selfmade yircuits wil go in there
3. cd drive
4. the upper part of these things are power resett etc. buttons 8)
5. ripped out core window with view inside
6. monolith :D :D
7. thick pipe for the wires
8. fanguards
s'all :santa:

:banana: :banana: :banana: comments :santa:
so the dummy house is getting shape

and wAllZ

note:
this dummy house is completly removal to access the PSU :santa:
and this is how it will lokk like ( i hope it stays this clean)

so the next pictures showes the water flow direction

and here i installed a fan to check if the tubing works :D

jeah it does :santa:

yay more comments :D :banana:
so i borought a jigsaw from my cousin so modding was on timetable today
got my handy on filter sponge

this is the biatch of a jigsaw <3

with this one i finally could cut the radi hole, fits 8)

with holes and sinkings

starting with a fan shroud

yall get me? :D

pice a $#!t ready for the bin :devious: :devious:

new fan/radi holder idea

gues what this is

MARY JANE IS BACK :D :D

-left for vacation-

so well 'nuff of that lets go on with the shorud.. well its done :)

looks a bit messy but does the job

and these are the pipe reducers for the radiator

and this is a problem

ill fix tomorrow
cya :banana: :banana: :banana:

aye aye :D
someone for a round of jenga?

jenga pieces cutted and sanded

while this one dries i went to the hair modder

and test applied the fans

then made these

for the top of the dummy house

some cutaways for the wires and cables

and the backpart

twice

and screwed, overview

close shot of the PSU house

and teh backpart

s all :D

drilled the holes for the top

connectors sandet

and painted black

see the dust

here it is screwed bondo'ed and sanded

like here

O,o?

this is the part where the cim chimney chim chimney :D belongs

something like that

drilled..

jigsawed and sanded -.-'

fits ^__^

hmm.. :think: :think:

bitchin big

the chimney will do something :D smoke comes out( yeah really realistic) and ill add low current LEDS in these chimney holder things those are connected to an uber LED fader so i have those attention lights so planes dont crash into them
aye thanks for the rep :)

more shaping

with holes and sunk

screwes

öööööööööööööööööhhhhhhhhh

and the *i have no idea what this is called* thing

crap"! i have to take more pics ><
heck that sucks....

yeeaaahh its f*cked

some filing

and a lot of work later( bout 2 houers) i got a almost final shot of the backpart ^__^

like here

i slowly have to worry about moddeling the
monolith

:banana: :banana: :banana:
didnt much but much pics :D :D
so...

needs some sanding xD
oh yeeeeeeeeeeeeeeeaaaaaaaaaaaaaaaaahhh 8) 8) 8)

much more yeaaaaaaaaaaaahhhhhhhhh :santa:

i like that

and that

pump tower

cokebottle is monolith, tape is core

core only

niiiiiiiiiiiiiiiiiice

some photoshopping

8) 8)

before

and after( its the lower part of the monolith)

and some sanding

thats all

blue ccfl 8)

so what do we do if dad put all dowels away? yeah we do them by our own 8)

8)

:D

:)

a lot of bondoing but no sanding :-/

so is inside

painting the monolith

some blue

aaaaaaaaaaaaaaaaaaaaaaaaand final white drybrush, so cool

dous this look hot or w00t?

:D :D

umm.....

2 um...

i have no idea why this exists but its there in real thing so i need it too

O_o

bwuhahaha

thats all :santa:

*leaves quietly*

got a "bug" on the front i need to fix

cuz iam a lazy ass i tryed fiberglass today 8)
covered with cardboard

alu foil

so does the desk

watch movie

glass applied

dry :D :D

well the fiberglas stuff wasnt it so i ripped it apart and throwed it in the bin :dead::dead:

but i was able to get some foam out of the can ^__^

i have no idea what this is called and im to lazy to look it up right now, so may some1 be so kind and tell me? its like a preview or sumething

transfered to MDF

foam is expandet

ugh after a long time sanding i finaly got 10 almost same looking.. parts :D

quick setp :banana:

muha :bunny:

monolith is done also :banana::banana::banana::banana:

makro shot bÄÄm

8) 8)

watch this space for a video :D (and please leave a comment ;) )

8)

ok ill give a try :)... so this stuff i put in there is.. cotton :D inside is a 10 cm ccfl color blue xD i wrapped it in clear wrapping paper and violate it with a normal hair dryer ;) somewhere on the foil i made some drips of black paint. yeah thats all i think.. you can see how i made the rock in the video eh?^^

well the monolith lokked weird so high with not everythin glowing so i decided to drop it down a bit

like this

final place

starting with the core

gonna be there like this

drilled some holes

also backsides

toothpicks becomes rods

dOone

addet wire on the backside

placed

monolith is now final

saaaaahuuuuuuuuuuuuuweeeeeeeeeeeet :banana: :D

a hole.(Oo)

thats how it should be (kind of)
some shredding

bend the rods

with white background

a good use for cable conduitings

front part is removable ^__^

slide in

and all down

i cover the screws with protection caps for injection needles (no i dont take drugs im a diabetic)

maybe put some LEDS in there, may look cool

more caps, this time as housing connection fake thingy

PSU house is now solid

drawed the side CD door

cut and opened

almost done

stalker writing for the top

a good friend of mine came over to mess up the writing :rooleyes: :D

cut out

paint

remove stencil

cut out

and mess up xD

dont let him cut MDF :D

then we decidet to remake the writing out of cellular rubber

muha 8)

twice Oo

alligned

s all :santa:

O_o

attached some drinking straws to the res

and yes they will be painted

MONEY SHOTS $$

drilled some holes

coiled some wire

:banana:

:D:D:D

thanks for the positive comments and the reps :)
üüää??
wired the other side

DA DA DAAAm

aplied some gypsum

got some scrap aluminium, ill gonna make a custom cpu WC holder thing

removed the wooden plate

lemme know what do ya think about THIS :D

8)8)8)8)

:santa::santa:

Quote:

---

Enemy, take one good look at me
Eradicate what you will always be
Tainted flesh, polluted soul
Through a mirror I behold
Throw a punch
Shards bleed on the floor
Tearing me apart but
I don't care anymore
Should I regret or ask myself
Are you dead yet?

---

8) \m/
squares out of foam stuff

glued on the back, but will be painted white

aplied pypsum on the other side

some wires

mounted

s all :santa:

its similar to this, dunno whats called in english, but its..*scratches head* well i dunno :D

the opposite wall was ready to be destroyed :rolleyes:

also some wires on the backside

this will be the graphite stuff you can see in a link here somewhere

wire on th other side

painted the tiles white

cleaning up the spaces

gypsum aplied

recut the frame for the logo

money shot

s all :santa:

Quote:

---

Would like to visit Chernobyl anywhere
between

---

gypsum on the back

IT BROKE :mad::mad::( :D :p

bypsum up

and upper

so is the other side

so is up there

money shot

cuz its broken

verybroken

makro shot

goin down with the lightning on my mobile phone, looks kinda cool 8)

this is the front floor part

while drilling

8) :)

O_o

damn!

not :D

DO YOU THINK THIS LOOKS GOOD?

:banana:

sooo. mostly all pics are down because the dude hosting my pics didnt payed the bills :think: so i asked an admin from another modding site who gave me 150mb webspace, soooo... UPDATE TIME :D :D
some helping lines for those things i still not know their names

some holes

2

4

6

all aplied

looks cool eh? :D

saahuet 8)

this will be a push button hole

drilled but not filled (ph33r my r1m3 sk1llZ :D)

yeah yesterday while sawing :dead:

BUT i have a lot of graphite now :)

ph33r my new jigsaw :=)

this will be some kind of podest where the monolith stands on

this is where it belongs 8) see ye tomorrow or so with updates... WITH PICS :D :D

lil bit of sanding

made a box out of wood, this is where the monolith takes place

no idea but yeah :D

made from a single block of... styrene? dunno styrodur its called in german

drinking straws

cut n' done

goes back there

my caselight board got fixed

and glued

:twisted:

graphite blocks @ core

cabel channel for holding and what not all Oo

FIT!

able to pull out

core shot

pump

drilled a hole for the pump cable

cut some foam stuff

a lot of em

soll dann später ma so inner art aussehn

confusion O__o

thats me O__o

solarisation

:)

all foam thingys

cool shot eh?

build a steelsupport bar thing

doOne

noiice 8)

goes there

lol :D this is what happens if you copy paste and translate your posts from a german forum :D thanks for showing and WELCOME TO TBCS :)

messing around with a floppy cable and heat shrinks :D

comments? :D

placed the monolith

needs some "improving"

improved :up::up:

some toothpick work

which belongs here

mesh

looks cool eh?

nooblike basepainting to see what this looks like non contrasted

:eek:

cool pics, i think this deserves a +rep ;)
anyways small update
a cover

cut and filled

with the steel bar

a ne floor

:banana::banana: