Project PC In Disguise

Here are those pics of the helmet with that weird Bondo stuff. Unfortunately, I'm new to it, so some parts will have to be redone because there wasn't enough hardening gel put in it so it's permanently sticky. Other than that, it looks super ugly, but it's coming along nicely. Also, just recently I discovered a problem with my schematic in the sense that there isn't enough width on the case to put both drive bays side by side. If anyone could give me some tips on how I could make it work I would be delighted; even if you don't have any sollutions, please leave a message on this thread, it's getting lonely being the only one posting. Well, I'm going to go cry lol, so I'm out.

*Note the yellow quesadilla maker in the background. That thing kicks major nalgas!*

Quote:

---

Originally Posted by purdy

Also, just recently I discovered a problem with my schematic in the sense that there isn't enough width on the case to put both drive bays side by side. If anyone could give me some tips on how I could make it work I would be delighted;

---

use only one optical drive :eek:
that would definately work, but I don't know how much you need that seccond optical drive. Personally I've never had more than one optical drive in my computers...

anyways, that is some serious ugly looking helmet :p ;)
but you'll do fine I think, can't wait to see how it turns out

good luck with modding

Lol, yeah the stuff that I'm using is extremely hard to work with, however once I get a good coat or two on the entire thing, then I can sand it down and paint it and it should look awesome. As for the thing about two optical drives, I have a DVD Rom drive and a dual layer DVD burner. I might just use the Rom drive, however, because of school projects and stuff, the burner is really important to me; so that's why I'm trying to find a way to fit both.

Hey guys, just thought I'd check in again. The helmet is coming along quite ugly, but nicely. It turns out I was using the wrong kind of Bondo. If any of you ever wonder which stuff to use, BUY THE CHEAPER STUFF!!!! That's definitely the stuff to use. Anyways, I added the final addition to the helmet itself, however I do need to add more Bondo and sand it all down before I go on to anything else. Also, I would like to note that my plans have changed a bit since my crappy concept art. I'm still pondering about how I'm going to make my optical drives fit (The case isn't wide enough for them to sit side by side); however, that is down the road. Also, because I want the helmet to slide and move, I am no longer going to have the power button inside the helmet itself. Instead, I will keep the button where it is on the case, but I will change the button itself to look like the Autobots logo. Yes, I know, I'm a slacker lol. Anyways, I have to go to sleep so I can wake up for tennis in the morning, so until then, I'm out. Oh btw, KEEP POSTING!!!! Even if it's hate mail, I don't care, I just don't want to be the only one reading this damn thread! Lol, goodnight.

I knew those pizza boxes would come in handy for things other than grease fires!

Future button.

You mentioned having the helmet move, why not have it slide up and stick above the case. Then you have no need to move the drives and stuff around.

Wow, you took the words right out of my mouth! This post was going to be about the "moving" part of the helmet. Unfortunately, the drives must be moved because I am putting a screen where they are right now. As for the helmet moving part, does anyone have any ideas of what I can do with that? My plan right now is to have a military button, that, when switched, will make the helmet move up from the front of the case to the top of the case, so you can watch the screen. I want to find some sort of conveyor belt or motorized sliders that I can attach to the case that the helmet would fit and slide on so when you flick the switch on, the helmet would be lifted up and over the case and when switched off, would lower back down. If anyone can help me with this, that would be great! Think of a forklift type mechanism. I'll be waiting for you readers to respond ;) but until then, I'm out.

Oh btw, I finally got The Bible (a.k.a. Mr. Capello's amazing extreme modding book). *Sigh*, if only I would have read this BEFORE starting my project. Oh well!

yeah...ive got the book too....read it from front to back...and still refer to it every now and then...its the perfect thing for modders who are just beginning

Hey guys, sorry about not updating it in a bit (my goal is an almost daily update). I went to the Ben Lee concert the other night and I'm still pretty drained from it, so I put my project on hold for the past couple of days. I'm at a loss right now because I don't want to get too far into the project, because, well.... I can't. I can't continue planning out the case until I have a sollution to the motorized slider problem. So basically all I can do now is to continue working on the helmet; but even that's going to be tricky because of the sliders. I'm still looking for help with finding sliders or some sort of forklift device that can lift the helmet, so if anyone can help me with that, it would be much appreciated. Should have more updates on the helmet, but until then, I'm out.

what about an old cd drive?

you can use the motor and sliders etcfrom it

I never even thought of that, thanks so much for the idea. The only problem would be the weight issue more than anything. I haven't even finished with the Bondo on the helmet, and already it weighs inbetween 2 and 5 pounds (approx.)
Do you think that would be an issue for the motor and sliders from the cd rom drive, and also, would I be able to program both motors to start at the same time, so the two parts of the helmet would move in unison? (I forgot to mention that the helmet will consist of two parts/pieces, thus needing two sets of sliders.)