Awesome results. The cooler looks great.
Printable View
Awesome results. The cooler looks great.
love it, looks sweet
This mod kicks all sorts of ass. It's like Darth Vader commissioned you to build some art for the Deathstar.
At least, that's what it's lookin like to me.
thanks a lot!!!!
in the last days we wasn´t inactive....we made a lot of smaller changes and prepared the last covers for the other side of the case.....beside that we made a test run with the watercooling loop and all radiators to see if we can use this system with only 1 waterpump....and good news: it works really good...better than we thought....:D
beside that we got 2 new cases which we will mod for the Games Convention in Leipzig at the End of August.....
with a bit of luck we can put all parts from the outside together by tomorrow....and then it should go really fast to finish it....:D
The mod is looking very good.
That is an interesting looking case you have there, reminds me of the ASUS Vento series. IS there a window on both sides of the case?
H-O-L-Y S-H-I-T
thats sweet as nice work guys
thanks !!!
@The boy 4rm oz yeah it really has a window on both sides of the case.....
today we put all parts together for the first time....it´s not finished but now we´re ready to carve out all the details :D
and that will be the card reader we want to integrate somewhere near the front together with some USB and Firewire Ports....
That looks really cool, the shape turned out perfectly.
i love this case white cases look sweet
thank you!!!
today we move in the mainboard for the first time to see how it fits in and to get a preview of the final result.....the cables and tubes will be rerouted in the next days.....:D
I can't wait to see everything mounted!
-Indybird
'Like a glove' (Ace Ventura voice).
Shouldn't be too hard to route those power cables, it looks like you have set yourself up pretty well for cable management.
good news & bad news....they always come together:D
after a few hours of pain @ my dentist we received the bad news.....still no package with a graphic card arrives.....:wallbash:
but then the good news ...today we got a short mail announcing which parts will arrive in the next days....so we´re going to change the Motherboard for an MSI P7N Platinum and we will get a pair of N260GTX which will also move in....:D:D:D:rock:
New mobo and GPU, nice.
atm we are working on the last details so that we could finish this project in the next days
then on Friday we finally got the package with the new Hardware, so i think today we´re going to test it and see how good it performs....
All I can say is HELL YEAH!!! Great new tech. That custom CPU water block looks sssssooooooooooooo awesome.
gccm?
watercool thoose gfx´s! plzzz:D
hellova nice work dude!
thanks!
@Froop yeah we´re going to the GCCM :D (like every year) i´m really happy that we can compete with 3 of our cases (Storm, Biocon, and T.F.I.S )
Maybe i can manage to take my Fire and Flames also with me, they say that there will be enough room for it....
But we were working on 2 new projects only for the Booth of the GCCM which will be exhibit as well....
@Pope year we want to watercool them, but i think we will integrate them later, because the waterblocks were not so easy to get for an acceptable Price....
today we tested the new Toys a little bit :D
12k points in 3DMark Vantage - not so bad for stock
then we also tested how far we can go with the clock and mem - up to now no problems with 718/1142 .....on stock cooling (temps are always lower then 60° with Fan on 100%)
i love this mod good work
Wow, this is turning out incredible. The different shapes manage to contrast well without looking like greebling; the black and white is simple yet effective. Very unique, but still very appealing.
thanks a lot !!! :D
This time i just have a small update.....we airbrushed the mouse for the system.....and we got the new System Fans so that we finally can replace the ones we used to fit everything on and in.....
but beside that we didn´t have enough time to do more on this project....that will change in the next week because in 2 weeks we will exhibit it at the Games Convention Casemod Masters which will be held within the Games Convention in Leipzig....
We didn´t have more time because we have to finish a lot of stuff until the Games Convention starts.....like those 2 Rasurbo Cases which i showed you earlier....but we´re on a good way to finish everything in time :D
Oh another small update with the gfx cards....we tested them only a short time up to now but we could could stable run them on 720/1150 Mhz (620/1080 Mhz Stock ) we did a few benchmark runs without any problems .....fan on full power and the card did not reach the 60° ....the only limitation we found is our QX6700
Mouse looks sweet mate. I am intrigued by that front fascia.
This case looks awesome! +Rep
love the mouse
got enough fans holy crap
thank you guys!!!
in the last days we spent the most of our time on those 2 rasurbo cases which i already showed a few posts ago....;)
here are some pictures from 1 of the cases....
Looks gothy, nice and grungy.
Looks awesome! Both mods that is...
Cool mod.
wow thats a new good type of ugly :P i like it
would scare the hell out of little kids at night :)
thanks a lot guys!!
....the work on the 2 Rasurbo Cases is done so that we can finish project storm in the next days....
but here some last pictures of one of the rasurbo cases which we shoot yesterday in the dark with lights turned on....
oh the white point in the right eye of the skull are the LED´s of an built in webcam which fades to full power when it´s dark around....:D
Hell Yea. Looks awesome! Kinda creep to. .I would be afraid to sleep near it. :)
I really like the diffused green lighting, Integrated mesh, detailed pieces, and badass scull design.
Intrigued by what you have done to the white case also.
+Rep for Creativity, Overall Fabrication, and Construction of your projects.
Dude now that looks cool.
legend you are... thats really nice
Something new!
This System is now running for a few month in one of our workshops....so it looks like a mess...
additionally one mainboard decided to pass out with a big flame (inside the case) so it really needed a redo....
so we start with a new reservoir which will better fit in the next steps....
Yay! Updates again! The logo is lookin great, where are you going to put it?
Can't wait until the next update.
-Indybird
fantastic work
looks good mate
That res is gonna look sweet.
may i sugest sticking the letters on top not bottom..
