You got my vote, mate. Hopefully froop dont start banging against the wall hahahahah. Wicked lighting.. spare me some? LOL
Printable View
You got my vote, mate. Hopefully froop dont start banging against the wall hahahahah. Wicked lighting.. spare me some? LOL
haha:P i might actually got some leds in spare;P
So… got some more laser cut parts and guess what?
Some fits, some don’t. measured once, twice and triple… hell.. I even quadro checked !
But this is what I got:
Loot
Can you guess what they are going to be used to:D ill show later
Along with the small parts I had another part made, because the other one I had didn’t fit well enough. (this is one of the parts that fits to the mm.! man I love when things turns out well
Got another back plate bend
Put in place:
And got the whole drilled for the led wire’s
Now back to these:
Taddaaa… got some of the hoses in place. This will look awesome with the fluid inthere!
This looked kinda messy:/
So moved it around to look like this:
The hoses has to end somewhere… in this case, under the res’s xD
And this is how it looks. The hdd loop is done, and is going to sit like shown in the pictures, and the gpu/cpu loop will go like, red pump (red impellar) – raddy – cpu – gpu – blue pump – res – red pump
After dark
Notice the little feature in the side of the front:P
Duo to this xD put another light in front. It looks awesome in the dark when the front is opened and closed!
thats about it! next up is paint xD... and some more parts.. when i get the last friggin parts remeasured 20 times to be sure... dont get it, they should fit:D
cu until next time lads!
looks great... that case is truley huge nice modding work pope keep it up
Love how your routing the tubing mate, looks fantastic. Lighting is looking great. Shame about the bits that don't fit.
thx:D the hose routing was also something that took me a while to figure out xD
Paint… paint paint paint:D
Managed to paint the test plate somehow reasonable and continued with the rest. A flie ruined one of the plates sadly:( so have to redo that one…
But that said it looks quite good
And now to put it in place and see how it looks
Wuhuu:D
And another cover plate I also got painted
And got these painted ;P
So… lets see how they fit and look!
Oh damn! With fluid and light this will be epic!
The bottom plate looks kinda wird, but that’s because the paint hadn’t dryid probertly. And its getting another layer or 2.
And with the raddy on!:D
thats about all until i get the last parts painted and when they dry i can start assembling it:D
until then! - cu
This is looking fantastic my friend. Painted bits look great and so does the tubing mounts.
i agree with tb4o man looks sensational.... cant spell but i tried
thx:D
now THIS is the result i wanted:D
:twisted:
Whaaaa Ghosts :o
mwuharharhra!!!
you posed... lol nice work
Looks great. I love the honeycomb fan grille. And that loop looks amazing in my honest opinion.
thx! just started painted some of the smaller parts.. takes forever:( ill maybe update later:D
finally an updata again ay?:D a small one, and not with all the little parts ive done in all this time, but time is short and ive torn apart the main pc so that i could put it into the case itself!
i got the last parts home, and sanded and painted them and fitted them on! and what a job.. took me whole day -.-
to start with! DnA !:D it looks awsome IMO!
and got the plates fitted on! wuuuh
and how much you can see through the window
look at the raddy reflecting in the paint:P
and last, i got handles installed:) quite usefull since this thing already weighs a tonne!
sry for the lack of pics, and the crappy pic quality. i am hoping to get my hand on a decent camera in a week or so, but until then you have to settle with this:D
next up is routing hoses and finishing the light setup. i got some cool bouble lights that i have a plan with.
have fun!
-p0Pe
That looks amazing, fantastic work my friend. Can't wait to see it finished.
Looking great. Can't wait to see more.
love it.... plain and simple.... love it
(the case is anything but plain and simple)
me neither:D think i might have some time to work on the watercooling today:DQuote:
Originally Posted by The boy 4rm oz
thx:) neither can i;PQuote:
Originally Posted by mittelmeier
hah yeah:P this case is a b###h to mod! but i hope the result will come out nice:PQuote:
Originally Posted by DonT-FeaR
they are.... trust me.... (results)
amazing work! cant wait to see more
a quick update with hose routing:D
i might have more in a little while;P
and another!
so... i got all the light installed + i installed 2 bouble ccf.
and i installed the remote control8):up:
so, solderd on wich took me a while and then hocked it all up, and guess what?
IT WORKS LIKE A CHARM! cant tell you how absolutely awsome this remote is:D 4 chans!
chan 1 - bouble ccf
chan 2 - res & pump leds
chan 3 - led strips front and inside
chan 4 - free
and ofc, i took some pics but they dosnt really do the mod justice:(as always it looks so much better IRL.
the remote:
and the bouble light
the res & pump leds:
the main light led strips:
and a with & without flash:D
with
without!
i am very satisfyid with the light results! came out better than i hoped for.
more hose routing:
and the messe backplate that will be hidden by the side, and thank god for that;P
thx for watching and reading:)
-p0Pe
Looking way cool mate, water loop is looking really good. I love black with white LEDs, my next major mod will incorporate both lol. Looks like cable management is gonna be fard for you mate lol, good luck.
only thing i can suggest is have channel 4 for the on switch?? other than that.. i love it man very nice..
hah thx! as said i think the black and white fluid will be a neat combo;PQuote:
Originally Posted by The boy 4rm oz
heh.. i actually thought about that and was quite hyped. then i came to think of it and the answer is: i cantQuote:
Originally Posted by DonT-FeaR
the controller runs on a 12 volt line from the psu:P wich requires to be off before it can be turned on:D off equals no power to the remote xDDDDDDD
That looks awesome all lit up. Can't wait to see it with the fluid in the lines, it's gonna look amazing. Using one of the 4 channel remotes is a cool idea. I've always wanted to get one but I've never had anything to justify setting it up on, I may have to do that to my computer.
thx:D i only need one little hose to complete the hdd loop:( the hose i had wasnt long enough sadly!:/ gonna order it sometime next week...
next plans is to get the psu´s inthere. have to drill out the rivets in the bottom beacuse i covered the entrance whole in the deviding section with the alu plates:P (the p190 has 2 psu that stands, and they have to be put in in some obscure way)
i might have some more light pics ill put in later:D just for the fun of eye candy;P
so.. threw the black mesh window on again beacuse it fitted the theme better than the black acryllic window i planned (and the window wasnt as cool as intended -.-)
glory shots:
and ooh i like it;P spend 15 min in bed in the total dark last nigh and played with the remote controlled light:D i dont think ill ever get tired of that xDD
until next time: :banana:
Very nice.
hehe:P a true man of few words xD thx!Quote:
Originally Posted by rendermandan
Looks hot pope, very clean build!
The mesh looks nice in the window. Good choice.
thx alot jon:) that was also the main point of this mod:D your comment means i havent failed hard!;PQuote:
Originally Posted by jdbnsn
thx:) i also decided to put a dust filter to cover it. i got 2*140 mm fans and a 120mm on the outtake, and only a 120mm intake, so there will be pulled alot of air through that window! and i really wouldnt want the whole thing to be covered in dust:/Quote:
Originally Posted by mittelmeier
Dude looks fantastic, you have done a fantastic job. The accent lighting is really effective. So how much does it weigh now lol. +rep buddy, nice work.
thx man!:DQuote:
Originally Posted by The boy 4rm oz
atm with all panels & radiator on it weighs.... erm... (31 kilo)lol:dead::dead::dead:
Phenomenal attention to detail. Very nice! +rep
thank you very much:)Quote:
Originally Posted by Mach
so... i think i figured out what to do with the last remote channel.
fans!
only problem is that i arent actually sure if the controller puts out enough power to run all the fans
2*200 mm
2*140 mm
3*120 mm
(yeah... lots of fans lol...)
actually i hocked all the fans up to a spare psu together with the light last night, and DAMN they throw some air out of the case @ max! and makes about the same noise as a jet:P
but when turned to medium or low speed, the whole case is actually very silent! still, it would be awsome to could turn off all fans beside the ones in the psu´s:P
I dunno if you could use the controller to mount the fans. However I do have an idea for you to contemplate.
I was thinking you could install one of those Scythe fan controllers to the top of the case. After having a look at the pics you are very pressed for room there. However you could mount a fan controller above the reservoir (in one of the empty drive bays) if you can find a fan controller than can control 7 fans lol.
would be a good idea. but as it is now, there isnt room for anything underneath the resevoirs:D the hoses inthere takes up 2 5.25 drive slots -.-Quote:
Originally Posted by The boy 4rm oz
all i really needed was to turn off the fans if posible since all of the antec fans comes with a standard of 3 settings, low, med, high. and dont really give any noise at the low setting:P but a almost passive pc of this size would be neat:D
Yeah I know what you mean. I use those Antecs and they are great fans. The 3 speed switch is really good. I leave mine on medium the whole time.
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
