Now that... What editing program did you use for the trailer? Looking good.
Printable View
Now that... What editing program did you use for the trailer? Looking good.
The program is use is AfterEffects.
Actually I work on the plan for my water reservior. Can anyone send me a datasheet of plugs like this one ? I need the size of it.
Funny, I just started working on some AE tutorials before reading that. Have you seen http://videocopilot.net? Some great stuff there.
And i'm no help when it come to water cooling, maybe ask down in the cooling section.
congrats, this is shaping up to be a great mod
I DID IT! Not the complete Case but the larges projekt on the case: The moveable cover-plate. Here is a total overview of the mechanism:
The final version is not very simular to the first one. Only the idea survived the building. The actuation will now be done by a striped servo (only motor and gear. no electronic):
The movement won't be done by the drive beld of the first version. Instead of this i use a normal wire which I can make as long as I need it so the size of the drive beld doesn't limit the movement
I will call the movement of moving the cover-plate apart x-movement. Also there is a y-movement which is necessary to detach the plate bevor the x-movement starts. How I realised it you will se on the next pics:
On the pics above you can also see the position switches. They can be place anywhere on the white angle for a better adjusting:
The threaded bars can also be adjusted like I need it.
The complete mechanism will be placed above the mainboard. But there has actually the powersupply his place. I had to remove metal where the supply lies on to get a flat level. I hope you understand what I mean :D :
So I have to find a new place for my supply:
Also I cut a hole as large as possible to get an idea of the dimensions for the window.
Additionally I replaced the motor/gear by an other striped servo:
That's it for today.
its going great and i was thiking something here since you are going to protect your system have you think about waterproof it would be great
Okay. An other update: The cover made some progress:
The other side is still in build.
Between the plates you can see an opening. This is the "Exit" for the mechanism to move the winow covering plate:
It will be closed with these brushes you can mount at doors:
This is my temporary controll for the covering plate:
And thats my workshop:
The first plates are equipped with LEDs. Unfortunaly I'm out of stock:
The next week I will creat the electrical parts. Next friday I have to register to the german masters!! And my mod is not as much completed as I wish.:redface:
mfg
Sweet, that looks really awesome with the LED's. How are they mounted?
There is a layer of 4mm plexi-glass between the upper plates and the mainplate. In this plexi I drilled some 3mm holes and fixed the LEDs with some glue.
That is awesome, one hell of a creative device you made there. I'm dying to see it work.
