Silverstone TJ11 Carbon

Update

Great news......did almost all the sleeving, a hell of a job. Only a few more sata and usb

And I was busy with the loop in the lower section. used the Y fitting for draining and to the rad

Almost finished with the BP links

Maybe you've noticed but almost all the red on the motherboard is gone......pci-e, red button and the red sata. Did this with black film

Next step is to make a slot in the tray for some cables like the power led, switch, usb and other stuff
So time for Dremel action

And finished

Placed the hardware back

Not finished yet, I mis the yellow line

So I've cut a piece of the yellow acryl

Again used some black film

Paste it and cut out the lines

And placed it on the tray

Still waiting for the last fittings, hopefully next week and then.....................fill up the TJ ;)

Grtz.

Just a little small update about the cables and the hdd's
Finally I got my hdd's in, 4TB is enough for this build

There's also a OCZ vertex 2 ssd 120 GB coming in for the OS
So installed all the hdd's and routing the sata and power cables
A small piece of the power is visible, but this is gonna be sleeved

All the power cables are between the hdd bracket and the drive bay

So almost no cables visible

All the sata's are going to be sleeved and placed like this

The power led, usb and other cables are placed behind the slide-out bracket (dont how it's called)

This is it for the weekend. Greetings my modding friends

Update: First loop filled

Finally all the acryl pipes are connected. Had some difficult issues with a few fittings
but it came out fine

Like the connection on the full cover block

But..........everything is connected now

Made some changes to the GPU loop, instead of the BP rotery snake I've used some more crystal link tubes

Time for the liquid.

And one loop filled.

The plan was to do the second loop also............but made a mistake
Need to order some more Feser because I dont have enough for the second loop

So to be continued

Small update!!!

Last two weeks I didn't do much because I was sick and had the same color as the liquid
But where back again ;)

I adjust the Lian Li bracket for the ssd and the slimline dvd

Cut and bent a piece of aluminium

This for the cover to hide the Lian bracket

Paste some carbon again

Placed it with the side plate

And made the same piece for the other side

This week I hope that I can get the TJ up and running...............more to come

Update: New liquid and last sleeve update

Hi modding friends, sorry for the long waiting but finally I,m done with the liquid
I,ve chosen Aqua-computer DP Ultra yellow
Turned out to be yellow/ orange but much better then the green Feser
And I must admid...................I'm done with it ;)

The TJ is finished now for 90% and I really want to finish the build now. So here some pics
before the finishing touch

Also finished with the cables for the power cpu/gpu

And the sata cables

And some more sleeving pictures

That's it for now

:bowdown: Your plumbing and sleeving are AMAZING!!! :bowdown:

I like the new coolant much better, but then I've never been a fan of REALLY bright colors.

Question:


Does anyone even MAKE a motherboard with 9 parallel slots on it???

I understand 8 for quad graphics, but 9???

I would finish the TJ this weekend, but my boss needed me for a major error in a cooling installation.

So instead a small update...........sorry you guys

Like you know now I don't like to much cables in sight

Bent a piece of aluminium on two sides

And the cables are gonne ;)

Other side also done

I'm thinking of taking some days off...........every time when I wanted to finish this build, something came up

But your boss will pull you out of your break because it will be something only YOU can fix...!
The Curse of the Modder.

did take some free hours today, and it worked

Update!!!

Finally the TJ11 is finished. Did the last things today

Sawn and bend the radiator cover

Also made a small cover for the outtake

And put it together

Past the last piece of 3M Di-Noc CARBON FIBER FILM

And a little preview from the TJ11 finished

Offcourse more and better pictures are coming your way ;)