Printable View
And some shots threw the window, this part is just AWESOME, and even better IRL.
The grill with the fan behind… Looks sweet to. I’m going to remove the sticker :)
Lets have some shot:
Thats it. Hope you liked it. Comments are more than welcome! Btw. I’m not done yet, a lot off details need to be worked out. (also important stuff as hdd and pump ^^)
Update 23 – HDD Part 1 @ Thursday the 10th April 2007.
Intro
Eh, not much time, so as soon I get some more time I’ll mod the harddisk. I want to cut NLM in the hdd cover, and mount some plexi on it. But we don’t want dust in the harddisk right? So I constructed this “hdd dismount boks” inspired from the spiderman case. In the next update there’ll be some actually modding, just hang on :)
The funny part
This it the harddisk, a 80gb Maxtor disk.
We’ll need a box, the only one I could find was this one.
My legoooo :D
Now the case’s ready.
Okay, here’s the top.
Then I cutted some plexi, I want to see what I’m doing :D
Some marking-up.
Some compass-sawing, and I got this nice hole :)
I need to fill this, I want absolutely NO dust into the case.
That’s good.
Then back to the case. I need to mount some gloves.
Drilling the holes :)
Looks good! Cant wait to use it :D
The silicone’s now dry, and It hold the plexi perfect.
And the finished case.
Let me hear what you think. Another update should be ready next week. Cheers.
Update 24 – Feets Part 1 - Design @ Friday the 18th April 2007.
Intro
Ey guys! Finally I’ll have some spare time! In this weekend I’ll make the feets! I’ve also been modding on my harddrive, I just want to have everything in the next hdd update (including testing and mounting) so you’ll have to wait a little. Buuut, in the next update I’ll properly bring you a little teaser ;)
Oh back to the feets, I did some sketchup (sorry it’s my first attempt, hope the irl letters will be a little more round :D)
I have to do 2, one in the front and one in the back. But you’ll see later!
The funny part
The is one of the sides. You can read on the picture, what the holes in top are for.
And here again, just so you can see the letters a little more easy.
This is the other side, as you can see it’s similar to the other side, so you’ll be able to read NLM from both sides :D
The two black parts will be done in 5-8mm alu (don’t know yet, have to check out the workshop) They are separated by a 5mm thick frosted piece of acryl. It gives a totally thickness on 15-20, and that’s perfect ;) They’ll be about 16-18cm long (don’t know yet, I cant remember the size of the bottom eh)
The plexi will light up, and there be light IN the letters, bet that effect is going to be awesome.
I’ll start on the feets tomorrow, right now I have some English homework to do. Cya later guys :)
Update 25 – Feets and psu! @ Thursday the 24th May 2007.
Intro.
Finally I have a new update ready!.
Accidentally I deleted all the pics :(, So no work in process, only final shots – or actually i have a little more work to do on the feets :)
I do really like the feets! But damn NLM seems “squared” without the outside tubing.
The funny part
Here’s the atx connector :)
4-pin connector for the cpu.
And at last, this is how the molex connectors does look.
The orange cablesleeving goes very well with the black!
But lets take a look at the case:
And with som light:
The last picture, shows how all the plexi edges will look when I add the leds.
What do you think? Comments are welcome!
Update 26 – Feets part 3 @ Thursday the 31st May2007.
Intro
Wee, ready with another update! ;) Well, first off, I would really like more light to come out from the holes, so need to mount a cathode under, or fix some leds or so. I’ll find out. ;)
Tomorrow i start soldering leds, we need some light in it right? :P. I think when the fridge’s in again, the tubing make it look less sqared.
The funny part
All right, here we start, a 50*50mm alu piece.
First thing to do on the alu piece: mill down one of the corners.
Then mill down the fist side!
Last part to mill.
That’s what I’m talking about baby.
Then some cutting.
Done and perfect ;)
This is the way the mounting works, hope you can see the idea ;) The holes fit with the holes in the bottom plate.
Like this.
Then mounting them.
Damn, that’s great.
You’ve seen those pictures before, and i decided to got with the mesh.
The holes got drilled.
What do you think?
Some pictures in dark.
Bad that the fans didn’t gave more light. But I’ll fix that, just wait ;)
Now this is what I need to do on the feets. Give the edge some paint and add these felt guys because we don’t want any scratches in the surface it’s on right`? ;)
Hope you liked it! Cya!
That's it. From now of the threat will work as a normal worklog. Still a long way to go, stay tuned :P
welcome jegerjon!
i followed this thing over at bit tech...i love this case..youve done a wonderful job on it
