Just splendid work! And i love what you've done with the PSU, +rep for that!!
Printable View
Just splendid work! And i love what you've done with the PSU, +rep for that!!
Thanks loki!
good news people! ITS ALIVE!!!
How it stands at the moment
Idle. Notice that the ram index score jumped from 5.5 to 7.5 by throwing these mushkin´s in! :D
Vantage score. I HAVE to get a new waterblock for this GPU.. Look at those vrm´s on gpu2 :wallbash:
And a 06 score
:D Congrats!!
And that's a great wallpaper too!
I think calling this case HUGE is an understatement. I love looking at a mod that is just CLEAN and crisp. Very nice work.
Thank you guys! This is part one, of a larger update that i decided to tear down into two, beacuse i cant finish the other part before a week or so :)
A little picture of the new mobo! Decided to get the EVGA p55 le, since its all black, and fits the theme best.
Also got the IQ panel painted.
And the backside of the Bitspower block. Still thinking of what to do with this:P
Another shot of backside, and card.
And the modded Aquacomputer cuplex kryos! Now in all black:D
And with a quite expensive fitting combo lol:D
Mounted on the mobo^
Also had to make some panels to finish up the rear of the case. So they were cut to size, and painted.
And i know, i know, "Dude, what happened to the garden" And here i must refer to the first word in that sentece, Dude.
That place is also my photo studio:P
And how they look when put in place. Quite the snug fit :D
And with the outer panel on! (Notice the arm, now without bandages:D)
Old versus new mobo! Bye Bye blue
A little sleeving (the wire that goes from the aquaero to the onboard usb ports)
"Upskirt" shot.
And in all of her glory:D
And this is one of my favorite shots so far!
And one showing most of the lower compartment:)
She is up and running now, and ready to attend s7lan (www.s7lan.dk) where she will hopefully attract some attention:P
And again, thanks to the sponsors ;)
Until next update, Cya!!!
-p0Pe
Dude. You continue to impress. Awesome.
:stupid: Absolutely OUTSTANDING work. :up: And the new mobo looks like it was made just for this mod.
Can hardly wait to see this finished.
just caught up. very very nice pope. i really like this mod
Thanks guys:D
Sooo... What have i been doing? Lots of stuff! A few test at school is over, and i got some more time to work on this, and have some good news for you! I should be able to have this thing done within a week;) And then i have the time to take her home, into the photo studio and make some glory shots!
Anyway, Uden mad og drikke, dur helten ikke (without food and beverages, the hero dont work) :D
Oh, and then i used a great deal of time on this, a remote controlled heli:D
And a close up:P
And now to the fun stuff! I had to make a new back plate since i lost the old one lol:D Made some improvements and had some quality time with my dremel!
The result,
A few diskes gone. I am still to cheap to get the quick disconect diskes:P
Final result before painting^
And now for the fans, i made some stickers to make them look a bit more classy:P
And insertet into the case, with the cable going into the back wall to the plug.
Now this little hole is the fillport for the hole system! But where does it sit?
Oh yeah, in the top:P Right above the reservoir. See the aquaero faceplate there? Wonder where this is going...
This^
Ended out like this:D
And last, but not least, the front panel where the on switch will sit. Need to get this painted!
Tommorow i will have some time to paint and fill down the top, and then there is just some minor stuff left to be done!
And again, thanks to the sponsors ;)
Inside shots in next update;) Have fun!
Wooooh:D Great article man! Thanks a lot:D
congrats! :banana:
Wooohoooo front page! :up: Congrats!
Awesome work. Keep it up and congrats on the front page.
Thank you all:D
As said, a little update more, to finalize the top!
How the parts looked before paint
And how they looked after!
The fillport. Sits quite flush:D
opened up:)
And the aquaero installed, now without screws or anything:D
Took quite some sanding to get this 2 mm steel plate to get the right shape:P
Not long until the final shots now :D:D:D
Seamless. Beautiful work. :up:
That's one of the slickest integrations into a panel I've ever seen :up:
You truly deserved the frontpage with this mod! Congrats!
Very nice indeed. :up:
We are nearing christmas eve, and the end result of one and a half years work was celebrated in a dark room in a small town´s photography club. With a coke in the hand, and the intence cold outside the light was turned on, the backdrops rolled down and the camera set to "on". The tripad was set up, dors shut, and then the clicks were going for 3 hours. A little chit chat in between made a good atmosphear, and the thought about having to go outside in -18 degrees to pick a christmas three didnt hurry things up.
Before i go on to the mod, and the final pictures, i would like to thank a few people who have helped me out a great deal with this project!
Dennis from Sign-1 have been really great at helping me with getting my files cut out, in whatever material i might choose, and Bo from skjern photography club for helping me with the setup for the final pics.
But lets get to it:
PC-Beto
Specifications:
Mobo: EVGA P55 LE
CPU: Intel i5 750
Ram: 8GB Mushkin Ridgeback
GFX: Radeon 4870x2
PSU: XFX 850W black edition
HDD: Corsair F60 ssd
Watercooling:
Controller: AquaComputer Aquaero + powerbooster
Monitoring: AquaComputer flowmeter + temp sensor
CPU block: AquaComputer Cuplex Kryos
Pump: Laing DDC 18W
Reservoir: Custom LUND PomPlex PC-Beto Edition
Fittings: Bitspower Matte black compression fittings
GFX Block: Bitspower 4870x2 blok
Radiator: HWLabs Black Ice GTX 420
Fans: Noiseblocker PK3
But enough of the talk. Lets get to the pictures! I wont say very much, but let them speak for themself. I hope you enjoy them!
That was all from me for now. I am planning something new in 2011, but lets see how far that one gets;) It have been a pleasure having these worklogs up, and reading all of your comments, so for that, i would like to thank all the users out there who have given me motivation to make this what it have become!
And last, but not least, i would like to give a HUGE thank to the sponsors who have helped making this build what it is!
-p0Pe
Wow, those are some beautiful shots! An impressive work of art, thanks for sharing it with all of us!
*jaw drops* that thing is amazing. simply amazing.
Stunning!!! Beautiful piece of art. :bowdown: Almost sad to see this come to an end, but looking forward to what you'll come up with next.
I couldn't have said it better. Outstanding work..Quote:
Originally Posted by TheMainMan
looks brilliant mate!
the green wires inside the case set off the whole thing. that looks great man!
vote p0Pe for the....high priest! I am glad to see such a gorgeous conclusion to this mod. And the colors are hot!!! Especially love the completed shots with the UV lights, very good quality finishing photographs. Good job bro!
Jon
Hehe had to pop in here to say beyond awesome job on this case p0Pe, I remember when you were in the early stages of this & I was looking around on ebay for a big old case to do my first forum displayed project case mod log, I'll get around to it some time after stealthlow but yeah this turned out perfectly outstanding mate, congrats :):up:. +rep
