No clusters. This is a test station It will have wheels and be mobile.
Printable View
No clusters. This is a test station It will have wheels and be mobile.
Finally, All of my systems are here!
First I have to mount the PSU's, then I'll get the standoffs in place.
awesome looking so far!
I have that same P4 motherboard in my fileserver...
I know all the systems run, but I haven't actually hooked them up to a monitor to see if they post. Hopefully, there will be no unexpected surprises.
Also, I'm going to be adding the PSU's too. I will cut off all wires I am not using. I'll keep the Motherboard cable, 12V (when necessary), and probably just one molex line with at least 2 connectors on it.
The I/O plates will be lined up and connected to small sheets of aluminum that will cover up all non-essential back plate areas. I will probably leave the PCIE/AGP slots open to add cards for future testing needs. The actual systems will be using onboard audio and video.
So, tonight I will install the standoffs and at least prep the back areas.
Man this is gonna turn out great. Really nice work here.
If you may be testing/using PCIE cards don't forget to leave the six and eight pin Video card power lines on the PSU's too.Quote:
Originally Posted by TheGreatSatan
Matthew
Speaking of which, I did a little too much cutting and screwed up, so now I have to buy all new PSU's
haha ahahhah aha ahhahahahhaah haahahahahahahaha
yr nuts man, in a nice way.
looool
CB
Oh unlucky mate.
I spent another $140 on on 4 PSU's
I added the stand-offs
I added a little silicon to hold them in
I'm using thumb screws to hold on the removable side, but don't have enough yet.
So here's where we are now. I'm waiting for the PSU's to come and I'm going ot start on the individual front plates for the DVD drives and Power Switches
