Blue Storm

Real update...

first off, the project that i did before the project.

This also acts as a TV stand while im at school

Then The case, after bondo, sanding, and priming

DVD drive primed, will be painted flat black to match the interior

Side panel after priming and 1 coat of paint ( i used engine enamel)

False bottom is cut sanded primed and drilled for mounting needs

How everything will be mounted on there

GOODIES FROM XOXIDE!

And after a tip from sxr.

Fancontroller... dosnt have to be pretty... just has to work...

Thats all for now folks!... Gotta get back from a fam trip, then more painting... and next update you will get to see the new window design.

nice :D

looking good!

Got some more work done today... Here it is!

I tested the hold on my silicone glue with some scrap plexi and scrap from the case windows

I picked up some awesome tinted Plexi at menards.

My weapon of choice

The new window of Blue Storm

Exterior coat of paint. first coat

The engine enamel dried on the tower

The first coat of enamel for the false bottom

The window cut out and ready for mounting

It's coming along nicely

indeed, its looking good!

So since ive last updated i've finished the case till i get hardware... (god i want the hardware! its like its teasing me...) But some pictures for all you guys watching this

Back Side looks stock, with a less... bumpy... paint job

The user side (?) window looks sharp too... i love how this turned out... As a side note, i love the CM 690 that i used, just disliked its stock lack of window-ness. i also had to make the 240 rad fit on top...

Better view of the window... looking at the pic there seems to be a little bit of wag in the cuts that dosnt appear in real life...

Better window view... the flowers in the back ground are popping like crazy, this isnt edited, this is how it looks outside today, hence why im sitting on the back porch with my macbook

The back of the window

Silicone... messy... but effective

My dirty wire secrets exposed!!! lol

Pump mount

Top radiator mount. The fans and the top of the case gave me some trouble... but it turned out well.

Not quite unisleeving... but not a bad look... i like it... although the different lengths on the shrink bugs me a little.

drive area

another interior shot

This was my remedy for the fan clearance issue... worked out pretty well i think...

The next update will just be stealthing the dvd drive on front, you can already see the velcro there for it. i just need my dremel tool back... After that there will be updates when i can afford some hardware for this guy.

looking good! that window came out great! +rep

Looks good! It's a good thing you're not using a GTX series rad, or you wouldn't be able to fit your MBB in. (speaking from experience here... :whistler: )

lol... i had to strain to keep the 25mm fan in and still use the rad... i almost went with 15mm instead. on another note, im seeking sponsors for the hardware in this build. Wish me luck!