I think someone found out that 2*3.5 bays was the right size for 3 very small fans (30mm, I think...)
Printable View
I think someone found out that 2*3.5 bays was the right size for 3 very small fans (30mm, I think...)
i'd use these to start with and modify as necessary.
3.5"
http://www.performance-pcs.com/catal...ducts_id=27179
5.25"
http://www.performance-pcs.com/catal...ducts_id=27177
Oh ok. Well I don't need more fans, just going to be unnecesary noise. It's the thought that counts tho!Quote:
Originally Posted by AmEv
THIS IS EXACTLY WHAT I WANTED. You are the man, thank you.Quote:
Originally Posted by xr4man
no problem.
Been crazy busy lately and have not had time to work on this project. Also have run into a few issues.
I think the motherboard has RROD'd beyond fixing. It wont stop red ringing even after new thermal past and the x clamp fix. Might have to use one of my motherboards...which means I'll have to re solder everything, buy a new DVD drive to swap out the I/O boards, and re do a lot of stuff. Kinda sucks and is pushing me back.
I got the final layer of paint on everything, now i just need to spray paint the decal on the panel so I can clear coat it, then put everything back together and get the sheet metal.
Thanks for staying tuned.
Have you thrown it into the oven to try to fix it?
That was my last resort..ahha
Teaser photo! Here is the first coat of paint on the front bezel. Custom switch plate up top.
And a mock put together.
Have you gotten the 360 DVD drive prepped for the front bay?
