[project]6th GeN. 30TB TriplX

Time to pick stuff appart! YAaAaaY!

For some reason is having a front mounted screen really cool and hip these days... so how could this project be anything less =)

Front mounted screens are supposedly used for computer monitoring or something...

In the lack of something better to do i decided to get the planned screen out of its precious little hideout...

Todays victim :

1x HP Compaq EVO 620

With the outrageous :

1.5ghz dual core pentium M
1gb memory
80gb hdd
15.5" LCD screen

it even comes with a xp home licence :P

And yes... i know it will count up as a 4th computer... but hey... need something to run the screen aswell 0.o

Ran out of time, ill do a write up later =) enjoy the pics for now

mmm, shiny. You should find a touch panel that'll fit that LCD..I know I've seen 9" and 10" ones that weren't very expensive, not sure about 15.5" though...

Whoah! This is going to be epic :D

Hi again guys !

Had some more time at my hands so have been able to work a bit more on the screen and towards making some screen mounts to align the screen flat on the laptop, u wouldnt believe how small the screws used for stuff like this is .... talking about a half mm tick or something.... such a pain in the ass to get ahold off in the local stores

Found a decent 1mm alu plate down in the working area... cut off a suitable piece and drilled some holes to get the screen attached..

Crazy small...

Screen mounted up in its vertical position =) hopefully this should look good

Aaand the other side =)

There we go.... screen mounted up on the laptop, just flipped over the opposite was as normal, still have to solder some wires for the on/off button and the thumbstick =)

Another thing that came to my attention today was the lian li brackets placed beneath the disk holders... that allow the holder to be removed from its baseplate... in my little world cant i really see the use of stuff like this beside taking alot of space... a decent 2 cm buildup on each of em...

U can see the height difference quite well... they have to go...

8 done... gotta love hecksaws... *truly hate em* -.-

should be able to start putting the rack together tomorrowish =) so a large update will come by then

x88x : a touch panel would be sweet :P throw me a pm if u see someone selling it, untill then ill just have to move the thumbpad outside the case or use BT =)

-Cg

Loving the laptop mod mate, very cool.

win!

Precision crafting at its finest. Eyes are glued. +Rep

Thx alot for the support guys =) Ill do my best, hehe

Got a delivery from OCZ today !

After a couple of days in transit the Hydroflow's arrived at the shop =) The finish look's awesome this far... and its delivered with both 3/8" and 1/2" nozzles ^^

Cant wait to get em mounted up, just have to decide on wich motherboards to go for 0.o

Very nice blocks, you're a lucky man.

/\ yeah agree