Unit 4

some cutting

toothpick making

looks like this

this is a connecting panel, because the front is removable, but there are still buttons need to connect,so.. oh well just wait until the next update *is too lazy to translate -.-* :santa:
and some bondoing

IM BAAAAAAAAAACK

colorizing the pump tower

grey.

shall be rusty but didnt came out good :(

...:dead::dead::dead:

but at least my switch power adapter removal thing works

IT WORKS !!!! :D

circle has 5 cm diameter till the end of the 8 edge 1.25, i need 4 of em

circle has 5 cm diameter till the end of the 8 edge 1.70, i need 2 of em

spray those 8 edge things on the mdf

after A LOT of filing

some more filing

and then i made those holes bigger with teh trusty dremel from hell 8)

final position

fixing my stupid mp3 player output

drawed on some 2x2cm squares

who who who the **** needs a scrollsaw? :D :D

after sawing a mess of fake snow

those squares will become the connectors for my new |nq|res
while the gue is drying i startet my milldesk

then i recived my acrylic tubes big thanks to squelsh :smoker:

glued

drilled a hole and taped it

8) 8) 8)

my milling desk is almost done 8)

dremel milling head

some milling but not filed or sanded, just to get the feeling

..s all :santa:

testbuild frommy geiger counter which will be controlled by the caselight circuit

this is the video

Quote:

---

Originally Posted by rerkin88

i like the work u've done so far.

Where in Germany Are you from dude?/

---

im from "baden württemberg" near tthe big town "heidelberg" which is actually bout 40 km from squelsh :D
anyways update time
filed the button holes square

then i tried to sand squelsh's res even, because he removed it with "aimed kicks from a junk part" :D try 1

well i diddnt took a pictur of it, but it aint worked, so i grabbed 40 grit and sanded it with it freehand while it spins in the drill 8)
the floor, 2mm acrylic

scrollsaw cutting :D

and glued toghether

while the glue was drying i solved the problem with the chimney

i removed quiet a bit to much material but hell, i dont care, it works :D

8)

these are the old res connectors, full with silicone and stuff
before

and after

polishing ownZ :D

sanding the res

starting with the acrylic rod

EFX designing

i think you all know what dis iz

8)

some designs

this is the reason why i take pics with my mobile phone, our cam is so

without the flash

my personal favorite

a bit too big

look, my button connector things are done

this is my lock valve

drilled some holes, some cutting,sanding etc...

attached that rubber stuff on the front

now i made some material piles

after miling

another pile

dOone

makro

and dont forget the core area

same here LOL

done

sketched the grahpite moderators

after miling

and the other part

I need an improvement for the floor because it was 2 even

shall be like dis

oh its broken :(

mmmmmmmmmmakrOOO

so wuz teh front part

look at dis PILE Oo

and some money shots

and last but not least..overall 8)