Hi, I just want an opinion on what you guys think of my first finished projects.
The picture of my computer is kind of old and it looks a little bit better now, I cleaned up all the wires and added the WD Raptor and a DVD-RW Drive. Thanks.
Printable View
Hi, I just want an opinion on what you guys think of my first finished projects.
The picture of my computer is kind of old and it looks a little bit better now, I cleaned up all the wires and added the WD Raptor and a DVD-RW Drive. Thanks.
what have you done to it, what have you moddet, and would you plz post some more pics:).. cant see much on thoose.
otherwise looks ok, hope to se more pics
Looks like a clear Xbox360 case with red talismoon fans, or the red twilight flow, with red ROL. Looks very nice, good job. :)
Also looks to be a very red PC in an acrylic case. Me thinks you need a bit of cable management in there. Otherwise good job. I also have the red Saitek, good KB.
-CollinstheClown
Welcome to the forums.
You have the Samsung drive in that 360, now I'm jealous. They have better covers than the Hitachi drives. Looks good though.
I have my own 360 Elite mod, Drei sechzig.
I decided to change the way my PC is being cooled, I ordered a lot of new stuff. I should have it next week, so I will post some pictures next weekend. There should be about 540 cubic feet of air being moved inside my case every minute once I am done with it. There will be only 5 or 6 fans on when I turn on my computer and the other ten or so will be remote controlled. So if I will be just browsing the web it will be nice and quiet, and when I am playing a game all the fans will turn on for maximum cooling at 540 CFM. :twisted:
* * * THE RED BEAST * * *
HARDWARE
Asus P5LD2-VM Motherboard
Asus PhysX P1 Processing Unit
Intel Pentium D 830 3.0GHz (Overclocked to 3.3GHz)
Western Digital Raptor Hard Drive (36GB, 10,000 RPM, 16MB, SATA-150)
4 x Corsair 1024MB DDR2 667MHz Memory (4096MB)
XG Vortec 600 Watt Power Supply (100% Aluminum Alloy Housing)
XFX GeForce 7600 GT Fatal1ty (4 Heatpipes, 36 Fins, Aluminum Heatsink)
COOLING
4 x Ultra Aluminum Memory Cooler
6 x 80mm Aluminum Mesh Fan Filter
8 x Thermaltake Forged Copper BGA Heatsink
8 x Zalman Aluminum VGA RAM Heatsink
Thermal CPU Heatsink Fan Duct
Zalman Copper VGA Heatsink (100% Copper, 2 Heatpipes, 160 Fins, 80mm Fan, 39 CFM)
Zalman Aluminum Hard Drive Cooler with 11 Heatpipes
Zalman Aluminum Northbridge Chipset Heatsink with 20 Fins
Thermaltake Tower 112 CPU Heatsink (100% Copper, 59 Fins, 6 Heatpipes)
5 x 80mm UV Red Translucent Fan - 32.5 CFM (162.5 CFM)
2 x 80mm Vantec Tornado Fan - 84.1 CFM (168.2 CFM)
1 x 120mm UV Red Translucent Fan - 84.3 CFM
Vantec Spectrum PCI Fan Card - 29.5 CFM
Corsair Dominator Memory Airflow Fan - 28.2 CFM
Ever Cool Hard Drive Cooler - 28.3 CFM
TOTAL: 540 CFM, 275 Fins, 23 Heatpipes, 20 Heatsinks, 16 Fans
It's all done. The remote turns on one of the vantec tornado fans, a second fan in the back, and the cold cathode light. I organized my wires the best I could but everything is such a tight fit that I cant even stick my hand in there anymore. I should have gotten a full sized case. Also the pictures after the remote show you what gets turned on with it.
How about some pics with room lights turned on. I can't see whats going on in there...
From what i can see looks good some pics with the lights on would help though
I took a couple of pictures with the lights on but it is even harder to see what is going on. I figured I will post them anyway.
How did you put so many fans on your computer? And it is sweet! Lovin the orange:banana:
header attached courtesy of imagispire
* * * THE RED BEAST * * *
HARDWARE
Asus P5W DH Deluxe Motherboard (27 Fins, 1 Heatpipe, 2 Heatsinks)
Asus PhysX P1 Processing Unit
Intel Core 2 Duo E6850 Processor (3.0GHz, 4MB L2 Cache, 1333MHz FSB)
TOPRAM 32GB Compact Flash Memory Card (IDE Solid State Drive)
Western Digital Raptor Hard Drive (36GB, 10,000 RPM, 16MB, SATA-150)
Seagate Barracuda Hard Drive (250GB, 7200.10 RPM, 16MB, SATA-300)
1 x Mushkin 2048MB DDR2 800MHz Memory
1 x OCZ 2048MB DDR2 800MHz Memory
2 x Corsair 2048MB DDR2 800MHz Memory (4096MB)
Antec True Power Quattro 850 Watt Power Supply (100% Aluminum Alloy Housing)
Diamond Viper ATI Radeon HD 2900 XT Graphics Card (1024MB GDDR4)
COOLING
3 x Ultra Aluminum Memory Cooler
3 x Lian Li PCI Vented Cover Plate
6 x 80mm Aluminum Mesh Fan Filter
8 x Thermaltake Forged Copper BGA Heatsink
8 x Zalman Aluminum VGA RAM Heatsink
5 x 80mm Fan Vibration Dampener
Power Supply Rubber Silencer
4 x Zalman Fan Mate 2 Fan Controller
Temperature Alert System
Peltier Thermo Electric Cooler
Copper Cold Plate (1/8” Thick)
Thermal CPU Heatsink Fan Duct
JETART CK4800 Nano Diamond Thermal Compound
Arctic Silver ASTA-7G Premium Silver Thermal Adhesive
Zalman Copper VGA Heatsink (100% Copper, 2 Heatpipes, 160 Fins, 80mm Fan, 39 CFM)
Zalman Aluminum Hard Drive Cooler (11 Heatpipes)
Zalman Aluminum Southbridge Chipset Heatsink (20 Fins)
Thermaltake Tower 112 CPU Heatsink (100% Copper, 59 Fins, 6 Heatpipes)
Thermalright HR-03 / R600 VGA Heatsink (100% Aluminum, 71 Fins, 6 Heatpipes, 8 Heatsinks)
4 x 80mm UV Red Translucent Fan - 32.5 CFM (130 CFM)
3 x 80mm Vantec Tornado Fan - 84.1 CFM (252.3 CFM)
1 x 120mm YS Tech Fan - 125.5 CFM
1 x 92mm Vantec Tornado Fan - 119 CFM
2 x UV Reactive PCI Slot Fan – 42.6 CFM (85.2 CFM)
2 x Ever Cool Hard Drive Cooler - 28.4 CFM (56.8 CFM)
Corsair Dominator Memory Airflow Fan - 28.2 CFM
TOTAL: 836 CFM, 337 Fins, 26 Heatpipes, 30 Heatsinks, 19 Fans
TEMPERATURE: CPU ~ 15°C - 20°C (59°F - 68°F), MB ~ 20°C - 25°C (68°F - 77°F)
