scratch plexi case builds

As promised I will be scratch building two plexiglass case's, one of witch i might sell the other however i will use as a spare system,here are the specs

THD-80JB CA :: Western Digital Caviar 80GB Hard Drive - 7200, 8MB, ATA-100, EIDE, OEM (1.14 lbs)
$48.99

ULT33134 :: Ultra X-Connect V-Series ULT33134 ( XVS) 400-Watt Power Supply - ATX, 120mm Fan, 20/24-Pin, Modular (4.4 lbs)
$48.72

O261-8034 :: OCZ Dual Channel 1024MB PC6400 DDR2 800MHz Platinum Memory (2 x 512MB) (0.25 lbs)
$36.99

ULT33193 :: Ultra X-Wind CPU Fan Aluminum Socket 775 with PWM Control (0.8 lbs)
$24.99

XFX MG-610i-7059 Motherboard CPU Bundle - Intel Pentium Dual Core E2200 Processor 2.20GHz OEM
$115.99

Total $275.68

Also heres my new toy, yay

thanks for all the replies
brought my supplies home today

found out that the pieces are indeed wide enough

and got marking

all replies welcome so please comment

Yay Update, i started cutting and got the basic pieces done
heres the side panels 20"x17" and the frame pieces

then these white pieces will be bent in a 90 degree angle so they will end up as the corners

wow i used a multi purpose blade and it was snowing

thats all for the moment, Comment please

ok not do much of an update bcause i was in such a hurry i forgot to take pictures, i got all the peices cut except 80mm fan holes dvd drive and io shield holes, took some of that "waste" plexi bent it, drilled it, and wet sanded it to make the hdd cage. im going to take pics, and should have it assemled for the most part on sunday, thats all for the moment comment if you please

Yea soooo... i bought some special adhesive and did some final trims, got the dvd drive hole cut roughly so still got a bit of work to do on that, in perspective heres what still needs to be done:
-cut out io sheild hole
-cut out 80mm fanholes
-cut out power button hole
-assemble pieces
-order parts
-install parts
-Tell my parents im Not CRAZY...well not too much anyways
comment please

Thought it was about time for a photo update,
heres a pic of the frosted hdd cage

heres one of the dvd drive hole that took forever to fit right

heres one of the glue i bought for this project still havent tried it yet,

and finally heres one of all the pieces after being wetsanded lighty

now all i have to do is the steps above this post.
comment please

Well...thanks for the Enormous amount of helpfull replies jk, i have decided to go ahead with that power button and cut the hole

here you can see the power supply hole

the inside of the case

and with the door on

this was done with masking tape it is not permanent i assembled it just to see it i am impatient, really all thats left6 to do is drill some ventlation holes cut out the io shield hole and install the parts

Ok then so i got the io shield hole done and drilled some ventalation holes

heres one with the io in place

and finally i added the fan to the top

, I ordered the parts on friday so if everything goes to plan it should be done by the end of the week. Please Comment

no packages yet, hoping for tomarrow, heres a pic of the ugly hole

and good news the glue works

thats all ive glued so far as i dont wont to glue it all together without all the holes being drilled
Comment Please

yea i know its just me and my dad are perfectionists so...but what ever.
So yea i got bored and decided to glue the rest together, heres the top and back glued on

heres it with the side on

heres where it gets sketchy with the fan and power supply, i always do have extra plexi though

and because im impatient i took some parts and throught them in to see what it would look like only the dvd drive is goin in the finished product

so yea...Please Comment

yay for small update
parts on floor

power button

and case with stuff in it

ok so i lied heres three pics, i decided to make a cd drive mount

just something simple

oh look theres my lexas old motherboard :P

thats all till friday

I am very pleased to bring you Plexi Case the Finally Also on a side note Happy Halloween
her4es the new motherboard

then one of all the pieces

the power switch cable is to short :(

so i extened it :)

heres one of everything plugged in

one of it up in my room right before i pressed the power button

.
.
.
.
.
.
And no explosions it works

and fianlly one of it up and running

thanks for joining me on this mod, please check out my newer one Gamecube Pc that is all


Link To Original Worklog