C&C GDI Powerplant PSU mod

Command & Conquer GDI Powerplant PSU mod

This is the worklog of the second round in the Dutch competition of BouwEenPc.nl.
First round I came in third with my Wall-E DVD mod.
This time the assignment was to mod a powersupply. Ok, initially I thought it would be difficult to imagine anything, the DVD player mod has at least something of moving parts where you can do anything. But fortunately, the kink in my brain gave me a new impuls and I think this is going to be fun.

I still play many games and this time I used Command & Conquer as inspiration. What's is really beautiful to a PC power supply to mod it to a power supply of the GDI base. And so be it;

Take a powersupply. (The crew of BouwEenPc will send us a Fortron Blue Storm PSU to mod, so here I use a mockup untill it arrives)

An old lamp foot of a lava lamp.

Two CPU fans out of the dark and ancient catacombs of my room.

Some red CCLs to create a bit of atmosphere.

Liver pate.

Unscrew the light bulb from the foot.

Mount the foot on the powersupply.

Attach the liver pate on the side and mount the two CPU fans on top.

This is how the mock-up looks like now.

And this is how it looks in the game.

Imagine here some hours of manuel labor in between ....

With Vikureen I will model some parts and think it will be a nice mod, underneath the large tower a red (heat) fire and underneath the two CPUs are blue LEDs (cool). I will eat the liver pate and there I will make some little mini-towers.

Here you see the two CPU fans, stripped of everything which is not necessary.

The liver pate replacements; two cans of exactly the right size.

What pieces of PVC waste .....

.... come on the side of the cans

a found a piece of perforated plastic.

Ideal for the railing of the big cooling tower.

So you see how that comes out, the bottom edge will become a black and yellow warning stripe.

And here you see how I go to work on the basis of the prints from the game itself.

*subscribes*

Subscribed as well. Love this game!!!

There just ain't enough PSU mods out there. +sub

Dude this is so gonna rock +rep

This is going to be a great mod. +sub

he has done alot more but has not updated /... it is agreat mod and i have been waiting for it to come to tbcs....

+rep

great setup so far, love it!!! :up:

Gonna be great man, can't wait the see it finished.
sub and +rep

Thanx guys, I hope you won't be disapointed. Here goes !

The PSU has arrived. A Forton Blue Storm 400 Watt.

After I opened it and removed the fan, you see what room I have left.

Lots of wasted space, the entire supply fits in a box of 150 x 115 x 50 mm.
Ok, I have to reroute the power entrance and the on/off switch too.

Made a box around the PSU as tight as possible. Also the large hole for the exhaust fan.

Used a smaller fan then the standard Fortron fan.

With the lamphousing on top, here you can also see that the cables are now coming out on the side.

looking closely at the images from the game, I build here a small exit-portal.

On the sloping roof, I will make a GDI logo, after the spraypaint.

The back (or is it front?), here come the two intakes.

I make them half inside the case, and in the towers holes for the air to pump through.

Here you see where they will be positioned, but I need to cut some of the height.

The front (or back?), I tried as good as possible to copy the measurments from the drawings.

Here is a close-up of the side.

And as he looks in the game at that spot.

=======

So sorry to hassle you guys,but the voting has started here in Holland for best casemod and best caseconstruction. I am participating this time with my R2-D2 mod. If you want you can vote for me at http://www.hardware.info/nl-NL/news/...van_tBCL_2008/ website :D

never dissapointed by your work frenkie

awesome! :up:

Gedaan! Great mod BTW!

Thanx man ! I o U :)


Today, among other things, I worked on the two intake towers. Here you see the two holes on the side where the air runs through the intake.

And I have the height adjusted, the proportions are now much better IMO.

For lighting I have knotted these 3 ultrabright blue LEDs together.

With a piece of stiff wire I made a support ring and glued the LEDs on it.

Here is a close-up of a ring at the bottom of one of the intakes.

Both intakes with a nice rubber edge.

This is what the inside looks like.

The large cooling tower gets red lights, same principle as the small ones. Here is a stiff wire as support frame.

Three LEDs glued on it and connected.

Thus, the LEDs in the tower.

That Should Look Neat!

This mod is going to come out awesome. :D Good work dude.

looking sweet!

Looks great.

Wow, looks FANTASTIC! I love C&C and perhaps I will try something like this in the future too!

Are you concerned at all about the fact that you're using (what looks to me like) cardboard or some sort of burnable material as the case for the PSU?

+rep, /subscribe. Can't wait to see a night shot.

Great looking and concept. +rep. Best of luck for the 2nd round, mate!

very cool good work

With two perforated strips and and some pieces of metal ....

.. I made this little ladder .... :)

Somewhere around here.

Here you see where I attached the power entree and the on/off switch.

Used some wooden sticks...

To make a small girder.

Here they come.

`

And for all the fans and LEDs to be connected, I have a used these connectors.

lookin good :up:

Nice.:up:

i love that ladder lol

Thanx guys, much appriciated.

Now we are coming rapidly to the end;

Just a small detail in between. This is a door.

Just 12 mm wide, coated with sticky aluminum foil.

Using a real warning decal as an example, I created a mini version for my mini door.

Coated the whole case in a few layers of primerpaint.

Added more details, I first drilled two holes in the cooling tower.

And with some wire and nuts I made a double pipe and mounted it against the tower.

The bottom edge of the fence with black and yellow warning tape.

To "age" the mod, I airbrushed some of the tower surfaces.

To make it more realistic I used this Scotch-Brite to add more weathering.

With sandingpaper and Scotch-brite I tried to make it look more worn.

To try out the electronics, I hotwired the green wire to Earth.

The electricity to the switch soldered and finished with mesh.

The last time the case is open, here you see everything neatly meshed.

So far this looks amazing! +rep

:stupid: looks great!

Quote:

---

Originally Posted by SXRguyinMA

:stupid: looks great!

---

HAY! AH'M NUT STOOPID!! :banana:

Frenkie, you build some of the coolest mods! Very creative, and your modeling skills are awesome!

*FEATURED!!!! I am starting to think you should just start your worklogs in the featured section, they end up here anyway! Great work buddy!

That looks great. The weathering really brings it together. Congrats on being featured.

Amazing

yea that looks great... i have been following on the dutch site but its good to read it in english.... much easier

Quote:

---

Originally Posted by jdbnsn

Frenkie, you build some of the coolest mods! Very creative, and your modeling skills are awesome!

*FEATURED!!!! I am starting to think you should just start your worklogs in the featured section, they end up here anyway! Great work buddy!

---

Awhh... shucks! Now you made me blush! :) I guess I O U next the Command and Conquer Construction Yard mod worklog. I'll better start translating the log. Catch you later !

Amazing modeling skills! The ladder and the pipes on the side of the tower are awesome! Congrats on the feature! +rep

And here are the final pictures of the power plant mod.

Another photo: with the case, in semi-darkness, lighted up it as I thought it would, cool-blue from the rear turrets and a hot red glow from the large tower.

This is the end of the worklog of the second round. This is an eliminating round, so some competitiors wont make it to the third and final round....
-UPDATE- yeah, I got through to the third and last round, that will be the Command & Conquer GDI Construction Yard Mod. Coming up!

Looks awesome dude! Congrats on making it to the finals and I am looking forward to the Construction Yard mod. :D

:stupid

Wow! That looks amazing. Congrats on making it to the next round. +rep