Wanted: Camshaft

I need a camshaft (as you may have already deduced). It's for a build, so make and model don't matter. What *does* matter is size. 24 inches long would be ideal, but close would work. No more than eight lobes please.

Condition doesn't matter, within reason. Rust is OK, I can clean that off. Each end will be hidden so damage there is all right also. The lobes themselves need to be in good shape.

Price is important too, I'm hoping against hope that someone has one or knows where one is that no one wants and I can get it for postage and a finder's fee. It's a long shot but we have a huge audience and forum posts are cheap.

Thanks in advance!

If you wanted a V-twin camshaft I could help...

LOL!

My motorcycle mechanic has all sorts of scrap parts for v-twins and I am thinking of an HD computer...

Call up some auto scrap yards and ask if they have any laying around that they could get rid of for cheap. Or if you're handy and have the tools, a U-pull-it type scrap yard would be a guaranteed source.

Quote:

---

Originally Posted by mDust

Call up some auto scrap yards and ask if they have any laying around that they could get rid of for cheap. Or if you're handy and have the tools, a U-pull-it type scrap yard would be a guaranteed source.

---

I'll be hunting this avenue this weekend, but in my experience places that sell these are proud of them. Maybe I'll get lucky.

Quote:

---

Originally Posted by blueonblack

I'll be hunting this avenue this weekend, but in my experience places that sell these are proud of them. Maybe I'll get lucky.

---

You might be able to pick up a scrap one too. Even though there may be damage, depending on the extent of the damage, you would never be able to tell. Try some auto repair shops too. They may be able to help.

I will check in my boxes of camaro parts and out at the shop tomorrow. I may have one or three laying around from a LT1. Two would be stock and the single would have a pretty radical LSA and some scaring on the berings from a spun bearing. If I have some at they shop they will most likely be from either those old Inline V6 ford engines or from a 69 mustang with a 302 in it. I dunno if they are still there but I may have the ones from the LT1 if I didn't give them away. If I find them you can have what you need for cost of shipping. If not we have a local pull a part junk yard and I think their cams are pretty cheap. I could make a trip there in a week or so for you.

$12.75 for a camshaft at my local pull a part.

http://www.pullapart.com/pricing.asp...c=9&#pricelist

This one usually has about 2000 cars so they should have something in the 24" range.

Quote:

---

Originally Posted by Oneslowz28

$12.75 for a camshaft at my local pull a part.

---

Can't hardly beat that! Thanks but no need to go pulling parts just yet.

No need to look at the Camaro parts either, the design can't house 16 lobes. Eight is the max and just about right.

Well if you need me to go pulling parts, just let me know. I like to spend a day in the junk yard. Last time I went there I scored a Sony Head Unit, 2 Sony Amps and 4 Kenwood subs for $25. I sold them in the newspaper for $150 a week later.

Quote:

---

Originally Posted by Oneslowz28

Well if you need me to go pulling parts, just let me know. I like to spend a day in the junk yard. Last time I went there I scored a Sony Head Unit, 2 Sony Amps and 4 Kenwood subs for $25. I sold them in the newspaper for $150 a week later.

---

AWESOME! :banana:

I have the cam out of my 8 valve AEG volkswagen motor i could let go for shipping.

So almost three years later I got this handled.

Friend got me two Yamaha 650 cams. They'll be showing their shiny metal lobes in a worklog here soon.

:banana: