-
Project: Silver Dragon "11/07" Pag15
As it had promised I am in return with a new project using as main subject known dragons beyond the painting of 3 effects that will be used
Here this picture of the architecture of the cabinet that I will use where his main quality this in the laterals ones that are totally flat contributing to me not to have any problem to do my cuts
Here this the image of my first cut already printed of the two dragons that I will start cuts it in the next
week
-
Re: New Project Silver Dragon
nice pattern! Those look like very complicated cuts. What is your technique?
-
Re: New Project Silver Dragon
Good patterns. Should look great once cut. I like the clean lines of the case you are starting with.
-
Re: New Project Silver Dragon
Today it was the day of leaving the lateral ready for the cut tomorrow
I began sanding all lateral ties to be in the metal
Then I made the demarcation to put the drawing of the dragon so that each dragon was perfectly in the same height was very difficult, but obtained success!!
Now it just lacks to remake some lines and to start the cut tomorrow
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
The cuts look really nice and clean! Nice job!!
Are you using a dremel?
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
moOmL
The cuts look really nice and clean! Nice job!!
Are you using a dremel?
making the cuts using dremel and the record of cut 409 of dremel
Thanks
-
Re: New Project Silver Dragon
I finished the cuts today them dragons and with them they had been more than 90 cut record
bigger resolution
-
Re: New Project Silver Dragon
Its as if the dremel was part of your body. Great work man those would have to be the most intricate cuts I have seen yet.
+rep
-
Re: New Project Silver Dragon
image effect cut dragon's
-
Re: New Project Silver Dragon
here an image you to see before and later and seeing the care that I had with the details
-
Re: New Project Silver Dragon
I today painted the dragons of the black color to protect the cut and also as base for the effect paint that I go to use
Here the cut of the name of the project that I made today only lacking to improve a little the cut and later to conclude with a finish that I will do tomorrow
The cut letters have maximum dimensions of 3cm of height for 2,5cm of width and they will be put in the part from above of the dragons
And goes to have a effect using as acrylic base and blue illumination
letter with the concluded cuts and with finish
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
Thats incredible. I love the windows and fangrill. +rep
-
Re: New Project Silver Dragon
Wow.. this is coming along very nicely..
Keep up the great work!
-
Re: New Project Silver Dragon
That fan grill is an especially nice touch.
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
jdbnsn
That fan grill is an especially nice touch.
In my project I want beautiful cuts, beautiful painting and a great illumination and I also want works with acrylic
In two or three days I finish these parts and posting photos
Expansion Slot inserts of Acrylic
-
Re: New Project Silver Dragon
That's amazing!!! I didn't know a dremel could do that. Great work. +rep
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
Visionary
That's amazing!!! I didn't know a dremel could do that. Great work. +rep
Initially this sticker will be placed in each acrylic but it appeared me an idea of using those stickers and another thing.
Later I reveal what will be
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
I bought 33 of the stainless steel screws of 3mm and more 15 stainless steel screws of 5mm to be used in the Coolers
But the screw of 5mm was great then will have that to change for of 4mm
Link Great Image
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
-
Re: New Project Silver Dragon
That is amazing dremel work...
I am usually happy with my dremeling when I finish and I still have 10 fingers! :p
+rep for being the dremel king
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
Darth Dad
That is amazing dremel work...
I am usually happy with my dremeling when I finish and I still have 10 fingers! :p
+rep for being the dremel king
Thanks darth
I am already thinking about the next cut but not on this project because it has more place :eek:
-
Re: New Project Silver Dragon
Awesome work, UC! +rep for some incredible Dremel work!
One question: Where does the power supply fit in, now?
-
Re: New Project Silver Dragon
:eek: You did that with a dremel??? I though it was lazer cut or something, wow that is amazing work!!!
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
FuzzyPlushroom
Awesome work, UC! +rep for some incredible Dremel work!
One question: here does the power supply fit in, now?
connectors mike's for adaptation that I will make in the necessary cabinet because the spower supply able was dislocated for low
adaptation of finished connectors and plugs
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
jdbnsn
:eek: You did that with a dremel??? I though it was lazer cut or something, wow that is amazing work!!!
Thanks jdbnsn
Cuts made by me using a dremel I was improving each cut
Here a link that posted before of my initial cuts
http://www.thebestcasescenario.com/f...ead.php?t=6521
-
Re: New Project Silver Dragon
I remember seeing those but I never ealized that those were done with nothing more than a dremel. You are certainly a patient artist and that is some impressive work.
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
jdbnsn
I remember seeing those but I never ealized that those were done with nothing more than a dremel. You are certainly a patient artist and that is some impressive work.
Thanks jdbnsn,
The very best finishes of the cuts has made the cuts perfect
I in my next project will surely make a video showing my cuts
And certainly I will have the pleasure of posting here
-
Re: Silver Dragon 25/11
I made the cover of the box where put the power supply
Being made of a thick metal would be easier to cut each side but I decided shapes and was perfectly embedded In the box
I prefer to use screws on the cover for box
I made a cut to plug the box in case
I have to decide whether to put 1 or 2 coolers and to put a graphic display
I will make an effect using acrylic, metal and leds white
Painting the cover of the box in the same color of the case
-
Re: New Project Silver Dragon
Those dragons are simply beautiful! +One more rep from a person who doesn't like tribal stuff at all :)
Dremel work at its best!
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
|NQ|Squelsh
Those dragons are simply beautiful! +One more rep from a person who doesn't like tribal stuff at all :)
Dremel work at its best!
Thanks |NQ|Squelsh,
First adjustment made on the cover of the box
I will use only 1 cooler of 8x8 with leds blue
With the end of the screen in the background of metal
And sendl make this gril dragon customized
This grill that I am using as test was that I cut
-
Re: New Project Silver Dragon
The Personalized grill Silver Dragon manufactured by my friend Mr. Shinji's Hardmodding.cl
-
Re: New Project Silver Dragon
Amazing work man can with to see when its all done +rep
-
Re: New Project Silver Dragon
Quote:
Originally Posted by
Gun Down
Amazing work man can with to see when its all done +rep
Thanks Gun Down,
I made a last finish on the cover of the box
And I am thinking make a base of the acrylic with led to put under the box
and with that improve the ventilation of the power supply
-
Re: New Project Silver Dragon
SgtM published you on the front page! :eek: