Re: [project]6th GeN. 30TB TriplX
A new day, a new set of renders !
Hi again guys, finally done with some more renders, have had some more time on my hand's
Re: [project]6th GeN. 30TB TriplX
Yet another day, and lots of plans and ideas keep emerging :P
(and yea, here we go again ^^ )
The windtunnel
As alot of you know, harddrives produce ALOT of heat when they are stacked up together, and tbh... having around 40 disks in a single box without any way of getting it out efficient will end in disaster and lotsa defective disks.
Building a windtunnel should prevent most of this, a windtunnel is basically a piece of whatever that controlls the way of airflow, in my case it will be buildt with 5mm plexi (god forbid) and will be housing 3x 80mm fans at low RPM, these fans will pull cold air outside the case, and the larger 250mm fans in the back will push hot air out
On to the consepts!
Re: [project]6th GeN. 30TB TriplX
Hi guys! New words from OCZ, WE have finally decided how to power up this rig ! and its going to be AWESOME ^^
The newly released PCP&C Silencer 910w, tripple up! will soon be in place, all with custom cut cables to tidy stuff up =)
Silencer 910
Legendary Silencer performance now in an incredible 910W of continuous clean and stable power. Our Silencer 910 power supply gives you unparalleled PC Power & Cooling performance and reliability along with a unique ultra-quiet cooling design, Quad PCI-Express connectors, classic black finish, and a price that seals the deal.
* 910W Continuous @ 50C (1000W Peak)
* NVIDIA SLI Certified (Multiple GPUs)
* 80+ Silver Certified (88% Efficiency); .99 Active PF
* Up to 90% (10dB) Less Noise per Watt
* +12VDC @ 74A (Powerful Single Rail)
* Rock-Solid, Super-Clean DC Output
* Quad PCI-E and complete array of connectors
* Automatic Fan Speed Control Circuit
* 5-Year Warranty and Tech Support
Re: [project]6th GeN. 30TB TriplX
Waterblocks decided upon aswell now, gonna go for OCZ HydroFlow HF-MK1 on all 3 mobo's ^^
*gottalovecopypaste*
HydroFlow HF-MK1 CPU Waterblock / For AMD, AM2, 775, 1366 / Core i7 Compatible
Designed with the highest possible exchange rate between the block and coolant, the HydroFlow can be easily integrated into any enthusiast water cooled system and help efficiently lower the processor temperature. The HydroFlow is compatible with AMD and Intel processors, including the latest generation Core i7 CPUs.
The triangular fins in the HF-MK1 provide the highest volume to surface ratio of any geometric shape for best dissipation possible, and this special design also creates sufficient turbulence to eliminate the “skin” effect caused by laminar flow. The base block of the HydroFlow increases center contact with the processor core for the greatest possible cooling potential, ensuring maximum exchange and functionality between the waterblock and CPU.
Whether you’re a first-time builder or a seasoned case-modder, OCZ makes the HydroFlow easy to integrate into your rig by supplying both high-flow 3/8” and 1/2” barbs in the packaging without the hassle of searching for compatible hardware.
Re: [project]6th GeN. 30TB TriplX
FINALLY, a update :P had my hands full with all kinds of stuff lately, so havent had much time to spare =/
anyways...
Lian Li HDD holder's
Maybe not the best with the mod spirit in mid,but its undoubtly one of the greater products for anti vibrating disks on the market :P 16x of them have been ordered, should be sporting a total of 48 disk slots !! and with lightweight alu ^^
Lian Li mobo tray
The same goes with this one, will keep stuff in place, 1 for the top, 1 for the bottom, and 1 for the middle, should be able to fit 2 fullsize atx and 1 m-atx this time around ^^
Oh... wait... 30 meters of square alu is on the way aswell ^^
Re: [project]6th GeN. 30TB TriplX
BTW, got a new toy to play with aswell ^^
Re: [project]6th GeN. 30TB TriplX
A new day has come ^^
And time for a update, hopefully updates will come somewhat faster from now on :P
one of those LARGE boxes arrived today...
And guess whats inside!
3x lian li mobo plates! omfg ^^
aaaand....
A bunch of lian li hdd holders, should be possible to house 3 disks in each of these, each with their own rubber ringed screws :P
Have to get these things assembled in sections of 8 and 8, one for the top of the middle case, and one for the bottom
If everything goes after plan, the aluminium for the frame should arrive the upcoming tuesday ^^
Re: [project]6th GeN. 30TB TriplX
The aluminium squares have been ordered up for the frame now, ended up on the following:
345x25x25mm - 08x
250x25x25mm - 14x
550x25x25mm - 14x
800x25x25mm - 04x
Gonna be ALOT of cutting and welding taking place soon, alu should arrive on tuesday, 20 meters ordered up ^^ 2mm tick
Re: [project]6th GeN. 30TB TriplX
And this would be the welding plans for now =)