-
Battlestar Galactica Mod
Time to start on my next project! :D And this time I thought I would include you guys in the progress. I feel I have missed out by not tapping the wide expanse of knowledge that exists on this forum. And with this next project I will be exploring new ground, so I will need all the help I can get!
This is going to be a mod based on the SciFi series, "Battlestar Galactica." I plan to mod my CM Stacker 830
in the style of the Galactica. I'm still in the design and conceptual phase, and I hope to get it drawn up in Sketchup soon.
I will post more detailed pics at that time.
I think this will be a fun one to do! I really enjoy the new BSG TV series, and it has many elements I can draw from for ideas.
And this case will be a huge canvas upon which to work, so there will be plenty of real estate to work with.
Not really sure how I will be able to work on this once my garage gets torn down, but I will figure something
out when the time comes. I'm just itchin' to start something new! :D
8)
-
Re: Battlestar Galactica Mod
Ok, some long-awaited pics. :D I messed around in Sketchup, and after many, many long late-night hours I came up with
a VERY rough mockup of what I'm planning for this Stacker case. I tried to retain alot of the original lines of the case,
so you could look at it and know this used to be a Stacker 830. Its lines match up so well with the Galactica, I think it adds
to the overall look (not to mention makes my job a lot easier!). So without further ado, here are the pics! (yeah, like you actually
read this whole thing before looking at them :P )
The top of the case will have the launch bay running through it from front to back, and the landing strip will be lit up on the inside.
The front will sport a 7" lcd monitor (A Boddaker first!), and the BSG insignia below it. I have special plans for that, and you
will have to wait and see (couldn't divulge all my plans first off, that just wouldn't be much fun :P )
The sides will have vertical ribbing to match the top launch bay, with the centers being the armor plating. (retaining the stacker's
side vent shape). There will be four engines, two on each side that will function as either fresh air intake, or exhaust. Haven't
decided yet. I apologize for the crudeness of the engines. Sketchup was not willing to cooperate with me when trying to create
complex curves (as evidenced from the top launch bay). So I cheated a bit and stole the engines off of an existing Galactica
model I found in Google's 3D Warehouse. But I think you get the idea.
I'm still hammering out the details, and don't have a clue what I will do with all that room on the inside. I do know that I am
going all out and doing a full-on watercooling setup! :D (Another Boddaker first) So all you l337 WC gurus be prepared
to answer a ton of questions!
So there ya go. As always I welcome all your comments and criticisms. I am now off to watch more BSG episodes (got all of season 2 the other day :) )
8)
-
Re: Battlestar Galactica Mod
Dam that is a cool Idea. I wish I could come up with something like that. Go for it!
-
Re: Battlestar Galactica Mod
Woah, nice job man, that is a killer sketchup!
Looking forward to the fabrication stage of your project!
-
Re: Battlestar Galactica Mod
I thought of making a Cylon Baystar theme, but I'm at least a year away from concept.
-
Re: Battlestar Galactica Mod
Nice drawing. Looking forward to seeing some construction. I know how long you can sit and do drawings trust me. I have a complete construction drawing detailing everything I looked at and considered prior to going to construction.:)
-
Re: Battlestar Galactica Mod
Thanks guys, I hope to get started on it soon. Now comes the part where I have to figure out materials and construction procedures. I have an idea of how to easily get the rib effect without having to physically make them all individually. I'm thinking for the top launch bay, I can create the basic dome shape out of foam, then apply a thick coat of putty or sculpy or something, and use a notched trowel to form the ribs. I may have to make a trowel if I can't find a suitable one at the tile store. I will have to experiment with it to see if it will work or not.
-
Re: Battlestar Galactica Mod
I actually managed to start on this today! :D Been doing most of the work on paper, trying to figure out the best way to build it,
especially the top landing bay, as it will be the most complex and detailed part of the case.
So what's the first thing that you gotta do when starting any case mod?
That's right- Disassemble the donor case!
After taking some measurements, I set off to what's left of my garage to cut a pattern for the foam out of 1/8" fiber board.
I made up a simple jig with a piece of alum flat bar. Traced my curved lines on both sides so they are symmetrical,
And cut out the pattern.
Set it on the case for fit,
And proceeded to cut the foam using the pattern and a long bladed knife.
Cut two pieces. These will be glued together, and glued onto the fiber board as well.
Sorry, that's all I got done tonight. But at least I started! After gluing, I will commence the cutting, shaving, trimming, and slicing
of the foam to the landing bay shape. Once the basic shape is attained, then I can coat it with resin or fiberglass.
Although I have been eyeballing this stuff called Plasti-Paste by Smooth-On. It's a trowelable fiber resin that cures into a durable
plastic in just 90 minutes. It would be ideal for making up the landing bay top, and all those ribs too. I would just have to work
in sections, what with its 10 minute pot life and all. :wink:
8)
-
Re: Battlestar Galactica Mod
Made a start?
Good lad.
Gonna be a good 'un.
-
Re: Battlestar Galactica Mod: Landing Bay
I hate it when work gets in the way of modding! :x
Well, I didn't get as much done as I had hoped this week, but I will post up what I did get done last weekend. I plan to get more done tomorrow to make up for it though. :)
Anyway, here are the carving pics. Snagging the electric turkey carver from the kitchen (shhh- dont tell Mrs. Boddaker! lol),
I started shaving the foam down to the landing bay shape.
Then I took the drywall sander and rounded the sides smooth. And yes, I was wearing a respirator the whole time.
Then I hacked off the ends, and marked the eventual openings.
Since that Plasti-Paste has just a 10minute pot life (length of time you have to work with the stuff before it sets up),
I cordoned off sections with strips of cardboard held in with brads.
The Plasti-Paste comes in two containers: One with the fiber reinforced paste, the other a liquid. Mix the two at a 3:1 ratio respectively.
I mis-judged the amount slightly for my first section, and had a bit left over. So I spread what was left over the other half.
You can almost watch the stuff set up. It changes color from the dark brown paste to the light yellow plastic within minutes.
Here you can really see the color difference between the first hardened section and the one I just laid down.
Completely cured and ready to sand smooth. I actually messed up and forgot to smooth it out more before it set up.
Now I have more sanding work to do. :x
Also because I didn't smooth it out adequately enough prior to it setting up, there are numerous divots that I will have
to fill in as well. I might just bring out the bondo for that, since the plastic is so hard to sand.
I plan to finish this layer tomorrow so I can move on to the fun part - the ribs!
8)
-
Re: Battlestar Galactica Mod
-
Re: Battlestar Galactica Mod
Good to see you keeping a worklog at TBCS Boddaker! You always do great work and i'm looking forward to seeing how this one turns out. :)
-Dave
-
Re: Battlestar Galactica Mod
Great Concept Design. I can't wait to see the finished product.
-
Re: Battlestar Galactica Mod
Looks excellent. Good job and luck!
-
Re: Battlestar Galactica Mod
Thanks guys.
Made decent progress today. :)
Got the whole thing sanded down pretty well with the drill and sanding discs, followed by the orbital.
Then I layed on a skin coat of bondo to fill in the low spots, and sanded that smooth. You can really see how uneven it was.
Lastly, I filled in the tiny air holes with the glazing putty.
Since this is the bottom layer and will be topped with all those ribs, it doesn't have to be sanded down perfectly smooth.
My main goal was to get these pronounced lines on each end.
Sprayed a light coat of primer on to get a uniform color.
And demolded the piece. I was careful not to ruin the foam because I still need it.
Shot of the underside. Funny, it actually transferred my markings from the foam to the plastic!
Here I started marking out the ribs. I figure one rib every 1/2" looks about right.
Here I am forming the side skirts of the landing bay. These will attach under the overhangs on each side of the bay.
The ribs will continue from the top , over the edge and onto these pieces. You'll see what I mean a bit later.
All in all a productive day. Happy Easter everyone! :D
-
Re: Battlestar Galactica Mod
Wow.. cool... how'd you plan to make those ribs? Alu plats?
-
Re: Battlestar Galactica Mod
Quote:
Originally Posted by
Acey
Wow.. cool... how'd you plan to make those ribs? Alu plats?
I plan to use the same stuff I used for the main piece, the plasti-paste. I'm going to try an experiment and see if it works. If not, I will probably resort to styrene.
But before I tackle the ribs, I have to clean up the side skirts and attach them to the main piece. That's on the docket this week.
-
Re: Battlestar Galactica Mod
Looking sweet! I'm going to be watching this one. +Reps
-
Re: Battlestar Galactica Mod
Looking good.
Waiting impatiently to see how all those ribs come out.
+rep my man.
-
Re: Battlestar Galactica Mod
Well, after referring to my reference pics again, I think I made too many rib lines. Right now I have 1/2" spacing, and I think I will redo the lines with 3/4" spacing. That will reduce the amount of ribs, and make it more true-to-life.
I was lucky enough to stumble across these awesome highly detailed schematics of the Galactica:
Image courtesy COBYWAN
I contacted cobywan to get permission to use his schematics for my project. Great guy! Turns out he built them off of detailed renders that came straight from Zoic, the special effects house that designed the new Galactica. Talk about a great find. Thanks coby! :D
-
Re: Battlestar Galactica Mod
You're gonna be a busy bunny :bunny:
-
Re: Battlestar Galactica Mod
Quote:
Originally Posted by
Drew
You're gonna be a busy bunny :bunny:
So it would seem.......
:devious:
-
Re: Battlestar Galactica Mod
Minor update:
Did some work on the side skirts. Got them smoothed down,
and trimmed. This is how they will fit onto the main piece.
I taped them into place, and will add some support braces for strength. Once those are in, I will bondo up the seam and smooth out the edges.
8)
-
Re: Battlestar Galactica Mod
Looking good. This mod is turning out real well.
-
Re: Battlestar Galactica Mod
Another productive weekend! :D
I managed to get the side skirts integrated onto the main piece. Here's how I did it:
First I needed to make a paper template for the inner braces that will hold the side skirts in place.
Since I formed them on the same foam buck as the main piece, they should be a mirror image of it.
So I took a piece of paper, folded it in half and cut it to fit the curve with the fold facing up. I strung a
piece of tape across for something to square off of.
I unfolded it and cut my braces. Made two of those, then made two smaller shapes and cut four
of each so I ended up with five braces per side.
Next was to cut a floor with notches for the braces. I used the built-in line in the plastic (made from the
wood base of the foam buck) as a guide to glue down the floor.
Then I glued in the braces, making sure they were square.
When those set up, I tacked down the side skirts. It didn't matter too much that there were some
gaps here and there, as you'll see in the next step.
Out came the Plasti-Paste once again for a good helping of reinforcement. I cut the floor out temporarily
so I could get to both sides.
Even so, it was a bear getting the stuff in the inner pockets. That was a good stopping point,
so I let it set up overnight.
The next day I rolled the table out for some more sanding and bondo filling. Oh what fun.
Didn't need much, and only a few areas needed minor spot putty.
After working the edges a bit more, I blew all the dust off it and brought the case out for a test fit.
Not bad! I may not even have to shave anything off. :)
You might think I can put the ribs on now, but there's one more thing I have to do first. I want to
add some detail to the surface: Pipes, various sized squares of paneling and such. It will be much
easier doing it now, than trying to work in between the ribs. If all goes well, I can get that done this
week, then rib next weekend.
8)
-
Re: Battlestar Galactica Mod
This is taking shape so fast. Incredible stuff.
-Dave
-
Re: Battlestar Galactica Mod
You should leave that hollow and rig up an HD mount or some thing in there. You could use it as a channel for cooling by adding a hidden fan(s) to it with the hanger bay as the opening.
That is looking great so far though!
-
Re: Battlestar Galactica Mod
Quote:
Originally Posted by
chaksq
You should leave that hollow and rig up an HD mount or some thing in there. You could use it as a channel for cooling by adding a hidden fan(s) to it with the hanger bay as the opening.
That is looking great so far though!
Yes, the landing bay will be totally hollow throughout, complete with running lights. Being such a large case, I can fit most/all of the components inside, so the bay's functionality might just be limited to ducting exhaust. I will get all the internals finalized though before I commit to building the floor and mounting it to the case.
8)
-
Re: Battlestar Galactica Mod
Time for my Sunday evening update. Not much has transpired since my last significant update.
Last time we left off with finishing up the side skirts and preparing the surface for the detailing.
Well I got most of it done over the last two days. It was good because this type of work could
easily be done in the living room with the wife and our 3-yr old. :) Although when my pile of
styrene piping disappeared, I knew who to ask!
Here I had just finished cutting up the first batch of squares of various sizes and shapes. You can
see the printout of high res reference photos of the Galactica on the right (thank you Starshipbuilder.com). :)
In order to save myself some work, I drew a rough outline of where the outer armor plating will be,
so I knew where not to add the detail (since it will be covered up anyway.)
...And after I got one side completed. I basically followed the ref photos loosely, just using them
as a general guideline. I proceeded in a random fashion so as not to look too uniform.
Some close up shots. Keep in mind all this will be painted the same color in the end.
For the detailing I used .040 Styrene sheet, and half-round styrene rod for the piping. The sheet came with
ultra-thin flexible strips, so I decided to use them as well for a smaller size pipe.
After adding a bit more detail on the side skirts, I think I can finally prepare the landing bay for the ribs.
If it works out, it's going to look awesome! Stick around.
8)
-
Re: Battlestar Galactica Mod
Looking Real Good! :up: :up:
Way to be detailed. I know this one's gonna turn out Kewl!
-
Re: Battlestar Galactica Mod
Well, my little ribbing scheme didn't work the way I thought it would. :(
I was originally thinking I could build up the ribs using more Plasti-Paste, first by laying down strips of weatherstripping with a 1/8" gap in between, then troweling the paste over the whole thing and working it into the 1/8" slots thus making up the ribs. But when I couldn't find weatherstripping of a suitable size, I turned to foam strips as a possible solution. I cut a bunch of those and sprayed one side with adhesive. But that didn't work either because the strips wouldn't take to the curves very well and the ends would pop up as a result.
So I am now in the process of laying the ribs down one by one, using 1/8" thick styrene strips cut to 1/4".
Sorry I don't have pics just yet, my DSL is down at home. I will post them tonight if I can get my internet back up.
-
Re: Battlestar Galactica Mod
So my internet at the house is still down, so I brought the pics into work and posted them. :P
Here's what I was trying to do with the foam strips, but they wouldn't stick.
So I cut up a bunch of styrene strips and went to work.
I have to fit each strip over the detail pieces. (had I known I was going to do it this way, I would have added the
detailing after laying down the ribs.)
The styrene is very soft. Doesn't need much heat to become pliable.
Here's where I'm at, about 1/4 done. But you can kinda see what it will look like.
Once all the ribbing is in place, I will add the outer armor pieces over select areas, then add detail to them.
-
Re: Battlestar Galactica Mod
I must say this is looking really awesome. I just joined the board about a week ago, and really am enjoying everyones' projects. It gives me some ideas and makes me want to work a bunch of OT so I can earn a bit of extra cash and start my project!
-
Re: Battlestar Galactica Mod
I agree, great work so far! Front-page pimpage!
http://www.thebestcasescenario.com
-
Re: Battlestar Galactica Mod
Check this out! I found you some more Galactica Schematics.
http://www.shipschematics.net/
-
Re: Battlestar Galactica Mod
-
Re: Battlestar Galactica Mod
I agree! It's looking good so far.
+rep
-
Re: Battlestar Galactica Mod
w00t! Thanks for the front page jdbnsn! :D
And thanks Eclecticos for that link, I may need more schematics when I get to the interior.
I hope to have another small update for ya tonight or tomorrow. :)
-
Re: Battlestar Galactica Mod
Quote:
Originally Posted by
Boddaker
So what's the first thing that you gotta do when starting any case mod?
That's right- Disassemble the donor case!
DONOR CASE?? That thing is godly, I want that sooo bad. How nicely will watercooling fit into that thing? I'll probably end up PMing you with more questions because that's really gonna be my next case.
Gl with the rest of the project, excellent idea, and follow through!
-AJC
-
Re: Battlestar Galactica Mod
yes, this case is awesome. I call it a donor case because it is the case I won from the Cooler Master contest last year. ;) If I had actually purchased it, I would probably think twice about hacking it up... then I would hack it up! lol
It has a cavernous interior, and it shouldn't be a problem fitting any kind of watercooling inside.
-------
Ok so I'm a dumbass for not checking on this earlier, but I found (and ordered) these pre-cut styrene strips
in the exact size and shape I need. :D That will save me a bunch of cutting time. And they will be more uniform too.
I just hope the ones I already did don't look to imperfect in comparison.