-
Hp-6
Hey Guys :) it's been a while since i posted in a modding forum. I hope you all have been well.
Been lurking the modding forums for a while now and have gotten the urge to do a quick mod.
The best way to get back into the swing of things is to start posting :)
HP-6 will pretty much be all the same idea's from previous HP's with new twists.
The Front this time will be similar to HP3-MEGA but the MEGA Blow hole will cut split and moved to the sides. Large Race Car/Jet type Side Vents will be Grafted to the side panels. A Wrap over clear side/top window will be added Benny style. A Rear spoiler, back panels and a cylon type modded front panel and Vertical top opening Cdrom.
Internals will have a split cavity with a bottem mounted MB and psu,
An internal 7" LCD which will be viewed thru the top window and maybe some watercooling :)
A new Alloy chassis is made for this mod, this will keep weight down add extra strenght and help accomodate the 2 New custom front box vents.
The original Side panel locating holes are copied accross
Side panel is roughly marked out with the design.
The front and side are fitted for a qik looksee.
Plex is bent to shape added and roughly sanded back to sit flush.
-
Re: Hp-6
The orignal idea was to start the Vent mods with craftwood.....
This was very quickly dropped in favour of my favourite modding material :)
The plex is scored heated and bent to shape.
Sanding the Vent helps to get a better idea shape wise.
--------------------------------------------------------------------------------------
The Side Vent looks kinda boring, too much flat area.... some SuperCheep Auto accessories items come in handy.
The Vents are cut up and re-glued
Then flush mount glued into the Vent.
-
Re: Hp-6
Just like the other HP's next is to fill in the open area on the front penal where the old cdrom etc used to sit.
After a ruff sand a bit of deeper grooving is done to help the bondo to stick.
Same done to the side panel
And a first coat of bondo
-
Re: Hp-6
A qik sand and a re-fit to start on the window.
The window shape is designed to Wrap over the top of the case, the intiernal Chassis will be cut away.
-
Re: Hp-6
The left over piece from the cutaway is re-used it will be shortened to become the mould for the top window and lengthened as shown to become the mould for the rear spoiler/wing.
A quicky wing is cut just to see if the shape fits in.
-
Re: Hp-6
this is freaking cool:eek:
love what you did with that spoiler thing:D
-
Re: Hp-6
Great start, can't wait to see where you go with this.
-
Re: Hp-6
Awesome work Defyant! Love your mods man.
j5
-
Re: Hp-6
I love it already. Glad to see you're back, I feared you were dead, or worse, had given up modding! Can't wait to see it with paint!
-
Re: Hp-6
AWESOME!!! Defyant is back. Long time no see mate. Can't wait to see what you come up with this time, so far it looks great. Here is some +rep for all your previous works of art and the current one your working on.