I wonder if it's like my UV red ACRyan heatshrink; pinkish under normal light, but a vibrant red under UV.
Printable View
ok so I just got an email from PPCs saying they're sold out of the NZXT red 24-pin extensions and don't know when they'll have them back. That's ok though, because my PSU and MB are actually 20-pin. so I emailed them back and said delete it and give me 25' of 1/8" red cable sleeving and a black 20+4-pin mobo connector instead. I'll do it myself!! lol I am getting the other extension sleeved at least :D
And the other 8-pin extension I don't need. I'm taking 4 of the wires for a 4-pin mobo extension and using the other 4 for the molex extension for the HDD
Ok well plans have changed, no more red NZXT extensions. Instead I'll sleeve them individually myself, doing alternating black adn red. that should fit in with the insides (and the black/red plaid fabric) better :D
should be sweet. This project is looking good! I need to start working on my xbox again... lol
well I went home for lunch and in my mailbox was a box from PPCs :D
Inside there was 25ft of red 1/8" sleeving, a bunch of black male and female molex connectors with pins, a black 20+4 connector, and a black 4p mobo connector.
I was going to do some sleeving tonight, but I've got a neat cable management idea, so I'm going to toss some ideas around tonight and see what I can come up with!
alright so I was just messing around with layout, etc. The cover I was going to make for the PSU isn't going to happen. The passive cooler I've got on my video card will cover the whole thing and you won't be able to see it. I'm going to do something simple, maybe just a flame-shaped cover out of 1/4" red plexi I've got laying around. I may use the LED flasher to light up some etched flames on the top window instead, we'll see how it all works out though.
For the cable management idea decided to make a couple cable guides out of red plexi to make things neat inside. This will require lengthening the 4-pin mobo wiring as well as the 20-pin wiring.
Details to come :D
alright, the plan is to make 2 of these to hold the 4-pin and 20-pin mobo cables, and I'll probably design and make more as needed once I start laying out the cables. I'm debating whether or not to put some LEDs in the bases to light them up, basically making the edges glow. We'll see
yay for glowing edges! :)
:D
I think I'm going to have to skip the glowing edges. I was trying to work out a way to get the wiring to the supports neatly, and integrate the LEDs neatly, and I don't think it's going to work too well. I'm still going to play around with some ideas though. Hopefully I can get the pieces water-jet cut so they're all neat and matching :D