-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ok,... the universal mounting plate is pretty much finished. Check it out.
First,... I got my stuff from Bill over at WWW.MNPCTECH.com. What a nice guy. I only asked for the U-Channel Trim and sent me this other stuff too. I need you guyz to pay a visit to his site for me. I would really appreciate it. He has some really nice shizz over there! Swear! He sent me the U-Channel Trim, some Large Reinforced Cutting Discs, and some Small and Large Cable Clamps! Thanks Bill!
Heres the U-Channel Trim I asked for. Its better then I thought it would be. For some reason I thought it would be cheesy but it's not! It's nice. It's thin. It's sleek unlike grommets which I think are bulky as hell.
Here's the U-Channel Trim I stuffed into the holes that are going to be used by the hoses. It's obivous the hole are to small for the U-Channel Trim.
So I cut some of the width away so it would bend more easily without flaring out,... as much. This is what I got. If I was to use it I woudl ahve to super glue it to the hole becase it kept trying to creep out. When you cut away the width it, the chaanel is smalled therefore it wont hold to the hole as well. So I kinda decided not to use it for these holes. I am going to use it somewhere else.
Instead I am going to use the foam except this time I modified it a bit. I cut awa some of the height and glue the foams edges together to form a ring. I placed it in the hole and then smashed the hose through the hole. It came out great. It reall seals off the hose well.
Now,... to the PSU mounting plate. I had a vision of what I wanted to use to hold the PSU to the plate and this vision started with this,... some arms. Very narrow, only 3/8". I didnt want them to be to wide because that would the PSU would be mounted high off the plate. These little pieces although only1/16" thick are strong enough to take on what i have planned for them.
Here are the arms with the tiny angled brackets.
This is what i was shooting for when I realized it was dumb. a stupid idea. There's just to much,... to many little pieces. I need something that is simpler and even stronger! Because you cant go wrong with having to much strength:)
Here are the new arms. Well,.. they will be arms. These strips are a 1/2" wide.
Bending with a screw driver? What could I be doing?!?!?!
Remember always make sure that whatever you are bending is straight with whatever you are using to make the bends.
Friggin ROCK! Yeah! One piece! WHOS THE MAN! LOL. I ahev to cut away some of the length still.
This was cool. I took these screws and put them in the drill measuring how far they were in the drill. I then spun the screws and with a file I ground away the thread under the head so the screws would slide nicely throughout the grooves of the plate.
Done! I used mobo offsets on the arms to offest the PSU from the arms. I drilled small holes and just screwed them in using a bit of permanent locktight so they dont loosen. The middle arm is a brace for the center of the PSUs PCB.
Mounted.
Mounted.
Inside the case.
Now, after all that,... I figured out a faster and easier and smoother design for the mounting system. I wish I friggin did it this way because it would of saved me so much time!!! It would of been easir to mount the PSU and all even though its not all that hard to mount it now. It just would of been smoother looking. Instead of cutting the gates in the plate, I would only cut a groove. The groove would ba as long as the gates but no perpendicular grooves. Then,... I would cut a groove in each arm. That would be it! It would be more adjustable and smoother to adjust too. I am kicking myself right now! Anyways,... this isn't bothering me enough to remake the plate. SoI am going to move on because I have ton of other shizz to make. Let me know what you guyz think.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Looks interesting, but I'm still trying to understand why all of those grooves are there... :?
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by Visionism
What you do on a saturday night is no business of ours! :eek:
HA HA HA!!! Wow that does sound dirty ;). Just for the note, I dont go that way, LOL.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by [DGN]Nexus
Looks interesting, but I'm still trying to understand why all of those grooves are there... :?
Huh? To adjust! If I get another PSU,... the holes for the new PSU might not be the same as this one I have now. The grooves are there so I can adjust the arms so they are directly below the PSU holes for mounting. Understand?
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ahhh... ingenious, I understand now-> :D
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
How much do you think that you have spend on sheet metal?
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
A little off topic here, but:
Tribal, if you like di.fm (I do, one of my fav music sites on the 'Net), you really oughta invest in XM Sat radio. Channel 82 is all about techno, and Saturday nights at midnight is Genetic Blueprint: two hours of industrial, house and darkwave. Right up your aisle, I would think. :D
Back on topic:
Beautiful, man. Love the PSU mod, it so fits the theme.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
There are alot of funny pics too seeing we're all nuts. Anyyyyyways,...
Mr. Troy,... We are very alike. All durnig my trip I was thinking abuot it, more like eating me. Yes,... I am going to make the revision. I'm doing it because I know I can do better. It shouldnt take that long actually. I will be seeling the one I have now if anyone wants it:) Not only can you mount a PSU to it. You can alos mount a PSONE too:) You can mount pretty much anything to it that can obviously be moutned to it. PM me, first PM first serve.
Boddaker,... the reason behind the PSU plate is because even if I only buy onhe more PSU,... the time it will take me to just mount it as oppose to postioning the new one, redrilling, and then cleaning up. I saved time. I am going ot have this case for awhile. I will end up swappnig the guts out several times.
To everyone else,... YES,... I will be covering up the PSU with shields kind of like the ones for the pumps. I am looking into getting more HDDs so I can complete the shield look. Ummm,... I think thats it? Damn,... it's good to be HOME!!! I'm going to go and take a nice hot shower and wash off my new muscle groups:)
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
concept is great! i love it! i wouldnt cover it up just to show the skillfully made and implemented design.
i love all things modualar WTG mate!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Now I know how women react to their Soap operas I can't wait till a you make a new post. As a construction supervisor working in casinos to retail stores I can say one thing BOY YOU GOT TALENT!!! in design and construction. I bow my hard hat to you..Very nice work and be proud of it and of the following you have from this project.. :D
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Thanks guys:) I am proud of my work:) I'm addicted to it.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
So,... the other day I had started making the newest version of the PSU mounting bracket thing. I am pretty much done with the plate. It only took me like an hour or two. I had alot of stuff to do the other day so I didnt get alot of time in. I will finish the plate when I get home and move on to the next step. I am selling the old one so if anyone is interested let me know. I'll trade it out too, I dont care. Till then.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Update. Well not really. I actually just got done revising the PSU mounting system. I am so glad I did it too. Check it out.
Here's the new plate. Much more simple then the last one. Took a fraction of the time to make.
Here are som emore sliding bolts. These are easy to make too.
Here are the new and improved arms. Notice the middle groove and the newer lower profile:) The offsets are screwed into the three layers of aluminum this time instead of the one as per the last ones I made.
Heres a closer look as to how I did it. As you can see I merely folded the aluminum instead of bending a box as I did the last time. Much stronger this way.
My new center support. I found this rubber plug thing and decided to use it. It worked out great!
The two mounting systems side by side. The newer one makes more sense.
Here I have the PSU mounted to the new one. As you can its very easily adjusted with the new sliding arms.
The PSU sits closer to the plate now. This lower profile might come in handy when designing shields for it.
Center support in action. Works great!
Inside the case. I did not drill holes yet to mount this thing because I am not sure about shields yet. I just dont want ot start drilling holes for the sake of completing the mount.
Now,... the old mounting system. As I said before I am looking to sell it to anyone interested. Here are some pics of how adjustable it is. Here is my PSONE mounted to it. Its not really mounted to it. I merely aligned the arms so that they were directly under and the PSONE's mounting bolts. It fits nicely and totally beats two sided tape:)
Heres the position of the arms for the PSONE.
Heres my VFD mounted to it. Again its not really mounted to it, just aligned.
Heres the positiin of the arms for the VFD.
I'm sure there is more stuff out there that can be mounted to this thing. Just remember that it uses mobo offsets so the tiny bolts are needed for mounting whatever it is your mounting. Tomorrow I can move on,... sweet. Time to design some shields now. I tried last nigth at work but it was busy as hell! I will try again:) Peace.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
SUPERB! I hope to have that ps one lcd for my project. LOL! How's spongebob? hehehe
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
So what's new? I'm missing my updates!
This board has been slow lately.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Seriously man. I need my fix!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Man I just registered this account with this site just to urge u to update ur thread.
I got the shakes man, I mean... what is happening to ur computer case man... tell me.... for the love of god tell me!!!
And ummm if u could post some pictures that would be cool too.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Hey Tribal,
nice looking Mod you have got there!!!
Anyway, i'm from the Netherlands (Amsterdam to be exact!, friggin cool city) and i check up on your log every day to see if there's any progression. i also saw you're post about the fact that you listen to techno music when you're modding...
As you might know: The top 10 list of world best DJ's is dominated by the Dutch!
so we really have got the best techno / dance / trance etc over here.
over here it is as big as your rap-music over there...
we've got these BIG ( and i do mean BIG: over 40.000 people) raves ( there's even one held in a soccer-stadion!) :D
So if you want to i can sent you some REAL techno, not the one's you guy's got in the states. that's really crapy music...
back on topic:
you really inspired me to begin on my own mod. right now i am drawing a model of my case-mod.
I like your UV Style: it's friggin cool looking!
and your ideas are really innovating.
As we Dutch say: mazzel en laters
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
hey no dissin the music...
but either way, Tribal, you like need to take a vacation once this mod is done. You work too hard.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
he must be on vacation already, its been a week since his last post. keep up the sweet work tribal
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
I reallity I beleive that his Real Life job is taking up all of his time. Maybe it was on another Forum that he is posting to that I read it. Something about having to work some over time.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ok,... here's the deal. I know what I have to do now. This is going to shock you but by now you all should be use to that seeing that I tend to do it here and there. I am going to remake,............. the pump shields. No joke. I going to make another set of shields for the pumps. The new version is going to work with cases overall look a bit more then the shields I have now. The reason is that the shields I have now make the pumps look very much like a pillar. It's the way I bent the shields. They look very cool but the look is not working with me. This is why I was having problems designing the HDD and PSU shields. It all boiled down the the pump shields. I need something that looked like them but slightly different. Everything I drew out I didnt like. Why? Becuase I was not 100% satified with the pump shields. Why did I make the pump shields the way I did? Because it made the most sense to make them that way, atleast at the time. The shields work, the look that is. When you look at them you tell yourself, this makes sense. But not for my puter. I need the bend the inner shields the other way. So that they kind of have to shape of the case itself. Once I decided on that,... I drew up planns for the HDDs just like that. I havent drawn anything for the PSU yet, but I know what I want. I have some pics of what I did last nigth at work.
Here's one of the sketches I drew for the HDDs shield style. As yopu can see they look like the pump shields. I dont know why is bothers me that much. I mean I know why but the next style I am about to make,... the pump shields look like the HDD shields but it does NOT bother me. Thats why I dont know why.
Heres the new pump shields. They look kind of like the other shields but I bent the inner shields horizontally this time, just like the case.
Here is a general idea of what the HDD shields are going to look like. Ass you can see there are alot of grooves so that the HDDs can breath.
Heres some explainations. It kind of confusing but the next pic will help you understand what I am shooting for. These drawing are not accurate seeing that I did not have the case in front of me when I was drawing. I have to adjust, alot.
Heres a blown up pic. You see the side or "wall" with the 80mm built in shroud. Thats the front of the computer. That fan will be blowing back. The other wall or back wall will be solid preventing the hot air from passing over the PSU. The hot air will go through the back of the HDD rack, through the front, and through the bottom of the case by means of the holes that are already there. The middle wall pieces are seperate so the air can flow through. They will be riveted to what left of the second floor of the case. All the walls or sides, whatever,... are goign to be riveted down. Even the the PSU. The PSU will use the same technology. Technology,... hell yea. I'M MAKING TECHNOLOGICAL ADVANCEMENTS HERE!!!
So yea. Thats what I am going to do. I cant start today but tomorrow is a definate. I will be selling the old pump shields for anyone is is interested. Price unknown. We'll talk. OH,... I am selling my bike. There is suppose to be a guy coming out tomorrow to pick her up. The reason I am doing this is to pay off the loan I took out to get her. I am planning on getting a new car. I will trade my truck in to get it. I am going to get a 2006 Scion xA! Going to uprade her a bit too. The car is kind of ugly stock:) This is what I am shooting for,...
OH,... and you know theres going to be a tribalized computer in car project coming up too:) Oh,... and I saved a bunch of money on my car insurance by switching to geico!! I saved,... $704!!! Also,... once I take this online defensive driving test,... I save another $70 a year!!!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
We finally get an update and you drop this bombshell on us?!? Tribal, are you trying to KILL us?!?
Seriously, though, I'm amazed. Talk about a perfectionist, you take something that was astonishing to all of us and remake it, because it didn't quite fit your artistic vision. Good for you.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by Rankenphile
We finally get an update and you drop this bombshell on us?!? Tribal, are you trying to KILL us?!?
Seriously, though, I'm amazed. Talk about a perfectionist, you take something that was astonishing to all of us and remake it, because it didn't quite fit your artistic vision. Good for you.
HA HA HA!!! Yo,... I missed so much here!! Why isnt the site emailing me all the replies??!?!?!?! Anywho,... yes,... I dropped the bomb shell baby! It's goign to to turn out great. I promise. You are going ot s@#$ your pants when this is done:)
@ jevfree - YO! I'm moving in with you bro!!! Move over!!! Are you serious!!! 40000 heads!!! DAAAAAAMN!!! Send me some of your stuff! I'll pay shipping!!! Let me know bro!!!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ok,... here is my first cardboard prototype of the inner shield.
My cardbaord bending skillz!!! Who's the man!!! LOL.
This is only the inner shield. I have made the sides yet. I probably wont waiste my time making the sides out of card board seeing that I already know what i want, pretty much the same as before. except the sides will have the same contour of the inner but slightly larger. Now,... after making this,... I realized that the shield doesnt really cover the bottom window anymore then the the old ones did. So I think for now I will keep this tower. I'm sure that one day if it starts eating at me the same as it is Dr.Coin :D, I will make another. I like the designs,... If I could change anything there would be a bit less, thats all. I dont like the idea of having the tower plain or with next to no design. Everything that I have made has some sort of design on it. some of the stuff has less design becuase I have to make room for buttons and other stuff. I will make sure that everything evens out at the end. Right now with the tower I am 50/ 50. I cant decide. The only real thing keeping me from making a new one is the fact that it takes time to make this thing. I am going to to fart around and make another inner prototype. I dont know.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
haha, nice car man. I just got my first car (I'm 16), I'll post some pictures in the general chat forum. But I'm all for doing stuff to get cheaper insurance, I saved about $170 per year for some corse I did through allstate. Plus another $40 for ABS breaks.
Anyway are all these parts being made from Aluminium? If so good luck, seems like you know what you are doing.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ok,... instead of making another pump prototype I made an HDD one instead. I think it looks cool. It's very plain as of now but thats ok. I add some design later. But for now,... this is the general shape.
Here's a the HDD shield with some chrome hose pasing though it:) Reminds me of doctor octopus!!
Here are some other shots.
Do you see how they two shields kind of work with each other? I have to tweak the general look of the pump shield though. Eventually they will go together like white on rice. The HDD shield,... I like the general look. It's somewhat simple but effective. A little bit a UV green accents and she'll be done. I might tweak her a bit when creating it out of aluminum. The PSU will be a cross between the two shields. Again,... there are no side shields made and displayed within these photos. Be patient.
OH,... I have some news. Before I go ahead and start doing some real work on the cmputer again. I will be moving all my stuff over to my mothers house and into her garage. It's like three times bigger then what I have now. It will be all mine!!! I have to buy some new tools now seeing that some of the tools I am using do not belng to me. But its ok. I will start this move asap! New pics of my shop soon to come!!!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by Aero
haha, nice car man. I just got my first car (I'm 16), I'll post some pictures in the general chat forum. But I'm all for doing stuff to get cheaper insurance, I saved about $170 per year for some corse I did through allstate. Plus another $40 for ABS breaks.
Anyway are all these parts being made from Aluminium? If so good luck, seems like you know what you are doing.
Dude try geico!!! I saved like 700 dollars by switching to them!!! Then,... check this out,... I got an email from geico justifying why I am paying what I am paying. The reason I am paying what I am paying is because I have some negative stuff on my credit report. They said that if my report was more in my favor I could save more!!! LOL! I was like S#$%,... I'm cool with that:) Evrything is made out of aluminum. Not to hard, jut time consuming. just a bit.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by tribaloverkill
Here's a the HDD shield with some chrome hose pasing though it:) Reminds me of doctor octopus!!
I think it looks kindof like a sentinal from the Matrix. Not actually the matrix, but in the movie. :D
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
So I went to moms and started cleaning out what will be my new "shop". I removed everything from the garage and moved it all into the shed. I dont want anyone to have any reason to be in there. That portion of the garage is going ot be pad locked. As you can see in the pics it's much larger then what I had before. It's needs some work done to it but not alot. I want to hang more shelves, all new. I have to build a good sturdy shock proof bench. It will be a bit bigger then what I have now. I am going to have a bit more equipment this time around so I have to size everything up so that I have enough room to move around.
It's for a good cause, it's for a good cause, it's for a good cause,... good cause!!!! Lordy. CAn't believe I did this. Oh well:) I haeva drill press now!!!! Sweet!
Look how cute,... this is my nephew, my brothers baby.
One last thing,... just before I left to go home. I was standing at my truck and looked down. I saw a screw driver in the grass. My brother gets into everything and just leaves everything lying around. So I pick it up and chucked it towards the pile of garbage I left on the curve. I was about 15 - 20" away and I,... well, look at the pics.
What are the chances!!! Hell yea! Tomorrow I will go back and do some painting, building of my bench, and so on.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ahhh!
The work you're doing on this case is nothing short of ****ING AMAZING. What credentials do you have a fabricator / machinist / engineer / artist? I'm just wondering because you seem to have an unbelieveable nack for this kind of stuff.
By the way, nice choice of rims for the Scion... I'm getting the same for my cougar, if I'm not mistaken... kazera's, right?
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by Cougar99
Ahhh!
The work you're doing on this case is nothing short of ****ING AMAZING. What credentials do you have a fabricator / machinist / engineer / artist? I'm just wondering because you seem to have an unbelieveable nack for this kind of stuff.
By the way, nice choice of rims for the Scion... I'm getting the same for my cougar, if I'm not mistaken... kazera's, right?
I took a machine shop class in highschool that lasted about a year, maybe more but thats about it. Never took art school or anything like that. Everything I do I thought up myself. Alot of the techniues I use I got from the short time in machine shop and just from using my head. Common sense. If I have a problem I'll sit there and figure it out. When I figure it out I move on. While moving on I am figuring out another way, a better way to do it. If I should figure out a better way I will most likely scrap what I was doing ro done and do it again. I'm nuts when it comes to stuff like that. I am not very good at setting. Most of the tim eit has to be perfect.
About the rims,... you are right:) Kazera KS's. They are fairly cheap, they look great, and they are considerably light!! Alot of cheap 17's are heavier!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Thanks for the update, Tribal. Always love to see what's new with this project, it has become my favorite of the boards.
And if you think that garage is bad, you should see the garage in the house I just bought. I would trade you in a heartbeat! I'm still chasing off all the rats before I can evens tart the remodel!
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by Rankenphile
Thanks for the update, Tribal. Always love to see what's new with this project, it has become my favorite of the boards.
And if you think that garage is bad, you should see the garage in the house I just bought. I would trade you in a heartbeat! I'm still chasing off all the rats before I can evens tart the remodel!
Oh s@#$,... are you serious? LOL. I hate rodents and spiders most of all. Only when the creep up on me. I swear,... I scream like a gurl when it happens, LOL. MY gurl loves it, she thinks it's the funniest thing in the world.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
You and me both. I hate rats, but I HATE spiders. My girl loves them, she'll "tisk" at me, roll her eyes and pick up the nastiest, huge long-legged barn spiders with her bare hands and set them outside while I'll be climbing on a table and freaking out.
Women. *shrug*
LOL
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
what kind of cable is that that you are throwing away?
just thought I would ask, it might be useful for a project somehow depending on what it is.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Ok,... I didn't finish the shop yet because I had spent more time then I wanted and the hardware. I was trying to get as much as possible for as cheap as possibly. I was trying to figure out the setup of the shop. Anyways,... I got pretty much everything I needed to bring it to life. Here are a few pics,...
First,... I just want to say that there is nothing I could ever create that is more beautiful then this,... other then this:)
BANG. Lots of wood. I got a whole lot of wood :shock:. A pile of wood that is,...
Here I am doing what I did for the last bench I made. I a screwing to 3/4" partical boards together to give me a nice thick benchtop. The last bench was 4'x4'. This new one is 4'x6' >-|. Theres going to be another littl eone that I will use to mount the drill press and something else. I have to figure out where evrything is going! Oh,... I am counter sinking the screws in this pic:) Very cool.
Here are the legs done and ready to be bolted to the top. I have support beams that will get screwed to the legs all the way around to make it nice and sturdy so I can,... you know climb on it:) LOL.
Tomorrow I am going to out first thing, right after work to finish the garage. Hopefully I'm not there all day. I have to make time for my gurl:) She misses me alot:) She's so cute:) I'm so whipped. Here,... in our relationship,... :[] I'm the little blue guy:)
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
cute kid.. are you going to have room in that shop for your stuff once you get all of those shelves up? It just looked like it might get cramped.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
Quote:
Originally Posted by [DGN]Nexus
cute kid.. are you going to have room in that shop for your stuff once you get all of those shelves up? It just looked like it might get cramped.
It's going to be a bit cramped but I will live. The cable I was throing away was coaxial cable.
-
Re: TRIBALOVERKILL, "Blackout" Updated--> 06/24/05
TRIBALOVERKILL the MODDER, THE,...... CARPENTER? Hell yeah baby!!! Check it out!!!
My gurl messing with the camera.
Check out this bench!!! It's huge!!! 4'x6'!!! I love it! It's so strong and sturdy on it's legs!!!
Here's the companion bench in which i will use to mount the drill press and something else. HOT!
Here is where they are going to go. As you cn see there is still plenty of room to move around. Granted I still have alot of stuff that has to go in there but thats cool though because I am use to working in a tight place:)
While I was working on the benches I had jessie painting the garage. We used extra can of paint lying around. We though it was white and then though it was some beige color when it turned out to be some sort of pinkish color :~) It's cool though atleast it looks clean:) I might try and finish the garage tomorrow but I had made plans on doing some OT at the hospital, 16 hours of OT. I don't want to but I think I have to. I should do it is what I mean. I dont know. We'll see what happens, how I feel when I wake up in the morning. PEACE OUT EVERYBODY!!! Yo,... what you guyz doing tonight? I'm going to take my gurl to the mall(because she really deserves it today for all the help she gave me), go see that movie Serenity :=:, then maybe do some drinking alcoholic:, and possibly do something else for my gurl :-=-:.