Saturn Magnetosphere.

[Eclecticos]

Hey, I think your mod is pretty cool. However what is that round thing supposed to be on the side? I'm not folowing that.

I found a mounting bracket for that fan so I can turn it from a center post.

I'm gonna cut the square out a little bigger. Damn Cutoff Wheels..
Flying all over the place. .

Cleaning up the inside a bit. . Look at the sparks Fly. .

[Eclecticos]

I'm going to space the Mobo up off of the mounting panel about an inch.
With both fans running It Kicks up a good Breeze.

My next update will be contouring the front panel, and Doing work on the top. .

[Eclecticos]

Thats a good question uhh. .

I will cut out the area I marked with the Black marker.

And a IO Shield out of Plexi.

[Eclecticos]

This will kinda add to the whole "Saturn" Magnetosphere Theme.

I'm Gonna cut some Fan holes out on it. For Saturn's Moons, different sizes.

Here are the moons and, My God there are allot of them.
I'm gonna go with Titan, Dione, and Phoebe.

I may end up repainting the dome Burnt Orange.

[Eclecticos]

Here is what I have going on top.

Here is my Lil' Mach Up for the Top Fans.

I'm Trying to figure out how to attach the mesh on the sides of this top piece.

[Eclecticos]

Putting it all back together to get an idea of whats left to be done.

Work continues on the Saturn Magnetosphere Mod.

[Eclecticos]

Still needs some cosmetic work. It will be Nice by the time i'm Done!

[Eclecticos]

Here is what I'm going to do at the top.

Motorize cylinders out of the top in a Up and Down Motion.

[Eclecticos]

Getting the top ready for my motorized cylinders

Ive been practicing cutting out shapes with my scroll saw. The skillz didn't happen overnight.

[Eclecticos]

Attempting to make another pipe slide through the center of these without a hitch.

Works Better with sandpaper Just Hot Glued it on there.

Didn't work out as I expected. I will have to bore them out with 60 grit Sandpaper
. . so the smaller tubing will glide through the inside.

Trying to figure out how much needs to be cut off.

I already bought some PVC pipe that will slide up and down from inside those pipes.
. .but I think I would rather go with Clear Tubing.

I'm going to repaint the mesh around the sides.

I figured out the Perfect way to motorize them.

Stay Tuned. .