PSU cable mangament easy first time mod

[Commando]

Cool. Good job. Your case is wildly bright.

[agrocm]

Cool. Good job. Your case is wildly bright.

thanks commando just a note the uv light isnt always on lol i cant stand it sometimes. imagine if i eva got water cooling with uv die hahah
do u think the psu would eva sell ? say ebay or somthing i wouldnt mind trying to sell it for a thermal take modular. btw just a note my core temps have droped down to a min of 27 degrees and max 33 degrees use to be around 40 so thats a bonus to cheers mate

[cured]

what are those colour cables? they look awsome

[The boy 4rm oz]

UV spaghetti lol. Looks good so far, for that hole for the fan you should have used a compass to make a round circle and then used the cutting tool on your Dremel to gently follow the line then finish up with the grinding tool. You would have a perfect circle.

[agrocm]

UV spaghetti lol. Looks good so far, for that hole for the fan you should have used a compass to make a round circle and then used the cutting tool on your Dremel to gently follow the line then finish up with the grinding tool. You would have a perfect circle.

yeah i really rushed it i will fix it up this arvo than prep it to paint i have to get new bolts for it to instead of the old brass ones thats all i had.

[agrocm]

what are those colour cables? they look awsome

its just cable sheathing thats uv reactive. and some uv reactive plugs

[agrocm]

not pics today i fixed to hole in my psu to a decent standard for me anyway sanded the cover did a coat of industrial primer sanded back and hit with a coat of a real deep bright green if that makes sence its dark shade but very bright i only did this coat on teh top and sides havent done inside yet im thinking i will have to do some kind of lighting in side now some green leds or such not sure yet any ideas?

[agrocm]

i did manage to get a couple of pics the first ones blurry as i was testing the super macro and forgot to turn it off but the close up of the paint is clear u can see my finger prints and **** lol i thought the paint looked good till i seen teh picture anyway i wet sanded it still has 3 coats to go and a clear i aint going to do much inside one coat should be fin maybe a light sand and a clear to protect it still have to take all the gear out of my psu and sand and paint the bottom section i also ordered 400 leds in bulk lol 100 green 100 red 100 blue and 100 white for mods to come only cost me 1 cent a led delivered they are 50 mA ones 5 mm
also did aqua mark test lol i got well 9971 hahahah yeah im in need of a new computer
tell me what u think

[The boy 4rm oz]

Very bright, fits with the UV well.

[agrocm]

Very bright, fits with the UV well.

yeah should do i hope all this is just a learning curve i really wanna sell it and buy a thermaltake modular and a new board and ram aand cpu with sli geforce 7900s