First of all, sorry for delay on updates... I am a busy modder that become a lawer on free time
This give-me a lot of work, but it worsth the effort (did it 3 times). I liked the result too.
Thank you !
You give a shot really near the idea i have. I intend to put this reservoir on front panel, using the smal ET. I am having trouble finding the plexi tube to replace the original glass case of little ET.
The hole idea is seems like you told.
Thank you, for your suggestion !
I already thoke how do it and this you told is the way i found better, but, i'll do a first hole with a hole saw with his bit, than, use the first hole as a guide to others, withou de bit. When tried do directly, it 'dances' over hard plexi. :p
Thank you for this tip, really nice one.
Thank you, i am doing the best i can. And sometimes, i have to do one piece, 2-3 times 'till get the result i spect. But the great deal is the learning process and friendship you conquest, it's the amazing thing.
Thank you !
This Weekend, i started some things on front panel and did the font case (it's almost finished).
Really hard work sanding (hope win that simbol to hard work )
Results as expected, very nice:
Almost there, with motherboard screws to font don't touch plexi directly:
This was how i did the holes, but, i did it another time to get final shape:
Clorofórmio is really very easy to work, not so toxic as i imagine, and fix the plexi easly, fast and stronger, watch:
The back panel of font i told did it twice (final result):
The measurements was perfect, the fun fits very nice, about 3mm over the font components, really nice:
Tomorow i'll finish it.
See you and sorry about delay, i am a modder that become a lawer at free time
Thank you !
Pedro Torres.