Water Alien Rebirth

[pedrofilho]

First of all, sorry for delay on updates... I am a busy modder that become a lawer on free time

the plexi looks much better nice work.

This give-me a lot of work, but it worsth the effort (did it 3 times). I liked the result too.

Thank you !

Neat plexi work. I think something that would go neat would be a coolant reservoir in the plexi bubble on the side.

You give a shot really near the idea i have. I intend to put this reservoir on front panel, using the smal ET. I am having trouble finding the plexi tube to replace the original glass case of little ET.

The hole idea is seems like you told.

Thank you, for your suggestion !

to get the lighted ring you should use a hole saw and a drill press, without the guide bit.
Good luck!

I already thoke how do it and this you told is the way i found better, but, i'll do a first hole with a hole saw with his bit, than, use the first hole as a guide to others, withou de bit. When tried do directly, it 'dances' over hard plexi. :p

Thank you for this tip, really nice one.

That's a great piece of work on the plexi. Keep up the great worklog, this is really excellent.

-Dave

Thank you, i am doing the best i can. And sometimes, i have to do one piece, 2-3 times 'till get the result i spect. But the great deal is the learning process and friendship you conquest, it's the amazing thing.

Thank you !

This Weekend, i started some things on front panel and did the font case (it's almost finished).

Really hard work sanding (hope win that simbol to hard work )

Results as expected, very nice:

Almost there, with motherboard screws to font don't touch plexi directly:

This was how i did the holes, but, i did it another time to get final shape:

Clorofórmio is really very easy to work, not so toxic as i imagine, and fix the plexi easly, fast and stronger, watch:

The back panel of font i told did it twice (final result):

The measurements was perfect, the fun fits very nice, about 3mm over the font components, really nice:

Tomorow i'll finish it.

See you and sorry about delay, i am a modder that become a lawer at free time

Thank you !

Pedro Torres.

[pedrofilho]

More font case work photos :

Some materials...

To VGA WC reservoir i'll do with little ET on tube:

Lots of work, just to fit the on/off key for the outside:

Some work before finish the mounting process

Dremel router at work...

Done:

Changing the internal cooler conector...

Done:

Disapointed with an anoying protuberance wich don't let's me close the front panel correctly, so, i did a hole another font, just more longer than first:

Keep the front panel and did all the rest again (waste a lot of expensive plexi)...

And, finelly:

[pedrofilho]

Tomorrow i'll post some news about the HDs and WC suport i'll fabricate in 2.4mm cristal plexiglass.

See you !

Pedro Torres.

[pedrofilho]

Because of you, I must now go buy that router attachment.

Hope it do for you the same things it did for me... It's an amazing tool.

i love the power supply pedro +rep wait wat is the non medical use for chlorophrom???

Thank you armadilloben. The nom medical use i think is this i did, using it to work as a soldering glue. What i really don't know is how toxic this thing really is, but, i bought it in a medical center store and had to fill a form with a lot of data about myself to register the buy.

The seller told me to use a mask becouse it's toxic. So i did it. On clorophomio recipient, also, have the information that the substance inside is toxical if in contact with eyes, skin or ingested, smelled, etecetera... So, i really protected myself because of those informations. Used a gas mask, work glasses and gloves.

I used it without any of the protection i told before (except mask and glasses) and have no problems touching it, nothing happens to my skin. But, it was an excepction.

Take care if you intend to use it. Really don't know what exactly is it's toxicity, but, is better it prevented than remedied, don't you think?

Thanks for your observation !

How much money do you have??
every page you buy a new powertool u brazilians most have money trees..

Yeah, and the huge one is rigth on my backyard... lol Or, as Carmen Miranda used to say: Yes we have bananas...

In fact, i spend a lot of saved money on this project as an anti-stress terapy. As i am saying this days, i am a modder that become an atourney in free time...

BTW-> I accept intl donations if you wish...

See you !

Pedro Torres.

[pedrofilho]

Nice work and great pics!!! I appreciate all the hard work and attention to detail you are putting into this mod. Thanks for sharing,

Agnat

You're wellcome, Thank you !

Photos of tests i did on new font case:

Closer:

A small video:
http://www.youtube.com/watch?v=kUZ-9VQcZz0

Slient and beautifull, loved it...

What about the font case, what you think? Coments, please!

Some news will arrive tomorrow !

Thank you.

Pedro Torres.

[pedrofilho]

Spent a lot of time today to find all these things:

This Dremel bit will do a V cut on acrylic to make easy to blend it.

Maybe, i would bring some news later today...

Pedro Torres.

[pedrofilho]

hey pedro in that pic of the stuff u found i see there is a zieneir diode, some resistors some possibly 100uF capictors but what are those green things on the right??

This is a fantastic eletromagnetic key. I 'till don't know how to put it on schema, but i know it shifts poles (on/off function) when some eletromagnect power pass trought or next to it.

The seller call it of 'red switch' or 'head switch', doesn't understand him after 3 attempts.

Tomorrow i'll do a video with an magnet and a multimeter to show it working... Maybe someone can help me doing the power switch i want to, using this thing...

Today i've removed the painting to start exterior works...

After about 10 minutes the paint was floppy and was easily removed...

Some water sanding...

First piece to get sanded

Just ready for a cleaner job...

I'll eat something, blend some plexi and come back here with news, maybe today yet

Thank you !

Pedro Torres.

[pedrofilho]

...That PSU Cover looks amazing.

Great job, and keep it up, once agian.

Glade you like it.

Thank you !

Some material i'll use to mod the CM aquagate-viva. I'll replace the CM black hose for this transparent and add an UV reactive liquid inside the cooler to get some extra lightning effects.

The fluid will travel trought the ET as a flux indicator. The little ET will move when fluid pass trought it's recipient, that will be yet iluminated with leds that oscilate lights witch HDD activity !

Small ET temporary home...

These bits are for doing a scretch on plexi to plait it. The first one is for 90 degree or more angle, the second is for 30-45 angles. And third is for borders..

Plexi bent using the two bits... steps:

About 45 degree:

Very inovative and expensive plaiting system... (surely it's not)

Details, a clean plait:

Tomorrow i'll use this tecnique on front panel and, maybe, start the CM cooler mod. Friday will arrive the colldrive 5 and 6 i've bought.

Thank you !

Pedro Torres.

[pedrofilho]

Thanks to folks of www.lasershape.com.br i'll need a fifty bay on case to install a small toy they'll send to me.

Tomorrow i'll put body filler and do some finishing job...

I've started the 5 bay job and did a small plexi window where i intendo do engrave Cooler Master name on front, at side of switches mnptech.com sent to me...

Every day i love it more, holy Dremel saw, it's really amazing with plexi, lets dust all together, ease to clean (love it)

A clean and precise cut:

Borderes of plexi piece wictch will abrigate de swtiches mnptech.com sent to me and CM logo...

Fits perfectly, at first attempt

Arrived the UV cooler to Aguagate Viva i'll mod, replacing black hoses for transparente and for the ET reservoir i won from www.neptuno.com.br, nice...

Keep going...

de_dust2

Piece as i left it some time ago, now it's fixed with epoxi and washed, tomorrow i'll do a finish job and sand it. Also will do a plexi panel and prepare to receive new ET reservoir... Maybe start CM WC mod also.

This today job seems easy, but, give-me a lot of work on detais of this piece. It's importanto to the project, because will carry on a lot of beautifull things, including the CM aquagate-viva reservoir ET, fans and a lot of lights.

See you soon with nice mods...

Thank you !

Pedro Torres.

[pedrofilho]

man, you shure got stady hands, those are some of the cleanest cuts i ever seen

Really got a nice cut this time...

Apreciate your coment, Thank you !

Fall from bed today and started working on front panel. After dry i'll sand it, cut the roof and put some plexi. Also, i'll do the front panel plexi window.

Photos:

It's almost ready to sanding...

See you soon !

Pedro Torres.