Many moons ago, I picked up this epson 286 with a view to modding it. I haven't actually done anything with it yet, but I thought I'd share the photos I took when I took it apart today.
Firstly, the front view:
Behind those front panel covers:
That switch slows it down from 12 MHz to 8 or 6, just in case some applications run too fast...
First look inside, at all the expansion cards:
The cards, one by one (from top/left to bottom right in the above photo):
Modem:
Yes, it is bent...
Memory expansion:
Video:
FDD/IO controller:
HDD Controller:
RAM:
Motherboard:
CPU:
The mobo slides in through a slot in the front,
and connects to the expansion slots via that grey connector:
One of the disks (20MB I believe):
(not as big as I had imagined)
The case almost empty. The drive cage is welded in place.