Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Updating WC Components, Sugjestions plz.

  1. #11

    Default Re: Updating WC Components, Sugjestions plz.

    Sorry D1337, i tend to spell things how they sound. Sound it out, its a j not a g...

    Anyway. In all the reviews i've seen, the Fusion cpu block out performs the apogee GTX even if the apogee has a "bow".

    Oh, i should also mention that reading the description from the site your buying from is much better than the manufactures site (in most cases). The blocks come with 2 sets barbs so i should be fine there.

    I guess i also have to get some thermal grease for the new blocks. Is there a specific grease better suited to WC systems? I'm fairly sertin that Arctic Silver is one of the best brands out there. I just dont know which compound is best. There have Polysynthetic Silver, Silver, Ceramique, and Alumina. Which is best? They cost within a few bucks of each other, i just want the best.

  2. #12
    Remember Remember, The 5th Of November.
    Join Date
    Jul 2007
    Posts
    523

    Default Re: Updating WC Components, Sugjestions plz.

    Arctic Silver ASTA-7G (2-PC-SET) Premium Silver Thermal Adhesive
    Some people use it for W/Cing setups, because it binds to block, which keeps it from slightly twisting from the flow.


    http://www.coollaboratory.com/en/product_pro.shtml
    This, will also bind to your block, but is THE BEST for heat transfer.

    Cermique is good, but not as good as as5, BUT its not conductive, so if your afraid you may use to much and get some on your mobo/pins it wont short out any components.

    Alumina will also bind to your block. Same quality As5



    Use http://www.newegg.com/Product/Produc...82E16835100008
    Assuming your just going to place it on your block (thats bolted in) if you know you wont spill it






    **By "binding" i mean, it will basically be glued to your block and component, so your not going to ever be able to switch out blocks, which come to think of it, isnt that bad...

  3. #13
    Project: Elegant-Li The boy 4rm oz's Avatar
    Join Date
    Mar 2006
    Location
    Balhannah, South Australia
    Posts
    6,411

    Default Re: Updating WC Components, Sugjestions plz.

    I use Arctic Silver 5, it can effectively cut temps by anywhere between 3-6*c depending on the cooler and environment. If you can get your hands on it I would recommend Arctic Cooling MX-2, it is still made by the same company that make Arctic Silver but this supposedly cools around 2*c cooler than AS5.
    Here is a link:
    http://www.pccasegear.com.au/prod5640.htm

    EDIT: I just found this new article over at techPowerUp
    http://www.techpowerup.com/?48049
    Project: Elegant-Li *NEW*
    Project: Alpha FINISHED
    Project: LEXA Revival FINISHED
    Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08

  4. #14
    . Spawn-Inc's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    4,145

    Default Re: Updating WC Components, Sugjestions plz.

    you can only buy the copper top separately BUT its frigging 39.99
    $39.99
    Petra's Shop
    $39.99
    Jabtech
    $55.99
    never heard of them, but i think it's because there from down under! cool-z

    it's mainly for people who are worried about galvanic corsosan. i am not but i want the look and slight performance increase that it may or may not give. if it can give a 1-2C drop it will be on par with a Fuzion, and look wayyyy better!
    CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
    GPU: 9800GTX /GTX780 hydrocopper
    Ram: Samsung 4GB /gskill 16gb DDR3 1600
    Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
    PSU: Enermax Galaxy 850Watt /EVGA 850 G2
    HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
    LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
    Sound: Logtiech Z 5500
    CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v

  5. #15
    Project: Elegant-Li The boy 4rm oz's Avatar
    Join Date
    Mar 2006
    Location
    Balhannah, South Australia
    Posts
    6,411

    Default Re: Updating WC Components, Sugjestions plz.

    That copper top looks so bad ass lol.
    Project: Elegant-Li *NEW*
    Project: Alpha FINISHED
    Project: LEXA Revival FINISHED
    Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •