-
Anodized
Project:warbox
Its my first mod and my 1st choice was which older atx case should i use
(in the back of this pic there is a wooden arcade machine. that is my 1st ever mod and it turned out quite nicely allthough the specs are poor the mod only needed to play robotron. Ahhhhhhh robotron~topscore above 1000000~beat that bitches)
i chose the one on the right
I will paint the case in either a metalic black or a camo green. ill let you guys decide which
The red marks are parts i had to hacksaw off
The circles are places where the military switches are going. each switch will control a fan. i drew a line from
where each switch is going to where the fan is going.
i will start the cutting by sunday for the switches
-
Anodized
Re: Project:warbox
The case i have is a mini atx so it will not work. however i found a normal atx i can use sorry no pix at the moment but ill keep it updated
-
Anodized
Re: Project:warbox
well i have a new case and a few more ideas. for one the new case its much taller. case
The new side pannel looks as follows
The new large square will be cut out for a small window and the 3 smaller squares will be for 3 80 mm red led fans. the small holes are where the switches are going. as yopu can see i added 2 more switches.
im modding that older hdd mount to sit inside of the case id a diferent way.
im also putting a fan on the top(thats just to trace and mark the holes)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules