Unit 4

[FrooP]

i should stop chatting till late at night and go on mod something more
but anyways a quick update

glued first side panel.. while im typing this i recognize that i wanted this side removable to the pump so il just will use the front side for accessing and here my first drybrush experience

[FrooP]

jupp updates here
next side panel ready and glued

marking the bottom panel

everything is glued int, ill try to make it a bit waterproof so if some water gets on the loos int wont go to the elektrical stuff (shouls stop listen to KoRn while typing in english its worse anyway )

sound and vibration proof, this will be silent ill hope

ok, this is the cover for the cd cover, but i couldnt remove the mainboard because this was to far, so i took out my *i forgot that friggin name*-saw and cut it for about 2mm, but yes this friggin tiles had to remove theriselfes

i glued them back, weird that i had some left over...

guess whos back in my laboratory

anyways i marked the hard guy and glued the res, then i ran upstairs, fast

[FrooP]

i think ill go for the name "parker" mh... or better mary jane?
water cooling block arived, its a used one so there are some bad spots

this needs some polishing

done ^___________^

htis will be the second res, needs alot of modding before it could move in

[FrooP]

the first 30 seconds are relevant and used in every vid ill upload

[FrooP]

the base of the res made with mounting foam

marked a hole

holed a hole xD xD

again drilling again tile regluing again some left over

trusty rusty

the foam was almost dry so i started shaping, but ill have to wait until its complete dry

[FrooP]

first coat of bondo, already cut into nice form

thats really all of today

[FrooP]

this is what the res shall look like... kind of

[FrooP]

yooooo, got a brand new water cooling pump, eheim, german quality

unfortunatly the pump is way bigger than the old one, so ill have to expand the pump housing

looks kinda weird

res 1 got a rustpainting today

thats all more to come

[FrooP]

update
finally got my hands on mdf so i started work with it

bout an hour later, lots if routing sanding and blablabla later i got this

just how i wanted

heres my sec res with wc connector

3 holes, the outer for the UV LED's and the middle for the straw

bingo!

marked the spot for the hinges

some angle grinding later

top cover, needs some modding aswell

but the pump tower is almost finished

makro shot

thats all 4 today

[FrooP]

daily update w00t
top cover is final sanded and smooth

intake connector for the res

drawed on the backpanel for the rad and the PSU

some holes...

some cutting

after some filing and sanding the ras fits in nicely and holds without screws

a shot in place

and this is where the psu goes in

thats all 4 today, tomorow more of this