Unit 4

[FrooP]

some cutting

toothpick making

looks like this

this is a connecting panel, because the front is removable, but there are still buttons need to connect,so.. oh well just wait until the next update *is too lazy to translate -.-*
and some bondoing

[FrooP]

IM BAAAAAAAAAACK

colorizing the pump tower

grey.

shall be rusty but didnt came out good

...

but at least my switch power adapter removal thing works

IT WORKS !!!!

[FrooP]

circle has 5 cm diameter till the end of the 8 edge 1.25, i need 4 of em

circle has 5 cm diameter till the end of the 8 edge 1.70, i need 2 of em

[FrooP]

spray those 8 edge things on the mdf

after A LOT of filing

some more filing

and then i made those holes bigger with teh trusty dremel from hell

final position

[FrooP]

fixing my stupid mp3 player output

drawed on some 2x2cm squares

who who who the **** needs a scrollsaw?

after sawing a mess of fake snow

those squares will become the connectors for my new |nq|res
while the gue is drying i startet my milldesk

then i recived my acrylic tubes big thanks to squelsh

glued

drilled a hole and taped it

my milling desk is almost done

[FrooP]

dremel milling head

some milling but not filed or sanded, just to get the feeling

..s all

[FrooP]

testbuild frommy geiger counter which will be controlled by the caselight circuit

this is the video

[FrooP]

i like the work u've done so far.

Where in Germany Are you from dude?/

im from "baden württemberg" near tthe big town "heidelberg" which is actually bout 40 km from squelsh
anyways update time
filed the button holes square

then i tried to sand squelsh's res even, because he removed it with "aimed kicks from a junk part" try 1

well i diddnt took a pictur of it, but it aint worked, so i grabbed 40 grit and sanded it with it freehand while it spins in the drill
the floor, 2mm acrylic

scrollsaw cutting

and glued toghether

while the glue was drying i solved the problem with the chimney

i removed quiet a bit to much material but hell, i dont care, it works

these are the old res connectors, full with silicone and stuff
before

and after

polishing ownZ

[FrooP]

sanding the res

starting with the acrylic rod

EFX designing

i think you all know what dis iz

some designs

this is the reason why i take pics with my mobile phone, our cam is so

without the flash

my personal favorite

a bit too big

look, my button connector things are done

this is my lock valve

drilled some holes, some cutting,sanding etc...

attached that rubber stuff on the front

now i made some material piles

after miling

another pile

[FrooP]

dOone

makro

and dont forget the core area

same here LOL

done

sketched the grahpite moderators

after miling

and the other part

I need an improvement for the floor because it was 2 even

shall be like dis

oh its broken

mmmmmmmmmmakrOOO

so wuz teh front part

look at dis PILE Oo

and some money shots

and last but not least..overall