a quick update with hose routing
i might have more in a little while;P
a quick update with hose routing
i might have more in a little while;P
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
and another!
so... i got all the light installed + i installed 2 bouble ccf.
and i installed the remote control
so, solderd on wich took me a while and then hocked it all up, and guess what?
IT WORKS LIKE A CHARM! cant tell you how absolutely awsome this remote is 4 chans!
chan 1 - bouble ccf
chan 2 - res & pump leds
chan 3 - led strips front and inside
chan 4 - free
and ofc, i took some pics but they dosnt really do the mod justiceas always it looks so much better IRL.
the remote:
and the bouble light
the res & pump leds:
the main light led strips:
and a with & without flash
with
without!
i am very satisfyid with the light results! came out better than i hoped for.
more hose routing:
and the messe backplate that will be hidden by the side, and thank god for that;P
thx for watching and reading
-p0Pe
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
Looking way cool mate, water loop is looking really good. I love black with white LEDs, my next major mod will incorporate both lol. Looks like cable management is gonna be fard for you mate lol, good luck.
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
hah thx! as said i think the black and white fluid will be a neat combo;P
heh.. i actually thought about that and was quite hyped. then i came to think of it and the answer is: i cant
the controller runs on a 12 volt line from the psu wich requires to be off before it can be turned on off equals no power to the remote xDDDDDDD
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
That looks awesome all lit up. Can't wait to see it with the fluid in the lines, it's gonna look amazing. Using one of the 4 channel remotes is a cool idea. I've always wanted to get one but I've never had anything to justify setting it up on, I may have to do that to my computer.
thx i only need one little hose to complete the hdd loop the hose i had wasnt long enough sadly!:/ gonna order it sometime next week...
next plans is to get the psu´s inthere. have to drill out the rivets in the bottom beacuse i covered the entrance whole in the deviding section with the alu plates (the p190 has 2 psu that stands, and they have to be put in in some obscure way)
i might have some more light pics ill put in later just for the fun of eye candy;P
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
so.. threw the black mesh window on again beacuse it fitted the theme better than the black acryllic window i planned (and the window wasnt as cool as intended -.-)
glory shots:
and ooh i like it;P spend 15 min in bed in the total dark last nigh and played with the remote controlled light i dont think ill ever get tired of that xDD
until next time:
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
Very nice.
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]