-
Watercooled LEXA
hello this is my first mod, during the course of this mod i will paint my case black and install a custom dangerden watercooling loop. so far i have stripped my case
tonight i will hopefully paint it and get some pics of that up.
-
Re: watercooling my lexa blackline
well that was quicker than expected,
yea i know its not the best job ever
heres where im working from, thats my dad bending over
now all i have to do is get paid,get a motherboard and order my watercooling parts, so thats going to take a while
-
Re: watercooling my lexa blackline
Yay for update,
first thing i did was marked it off and drilled holes
then used a jigsaw to cut it out
and finally smoothed it out with my knock off dremel (thats me) and drilled the holes for the fans screws
Afterwards i gave it a fresh coat of black paint.
I will hopefully be getting paid this friday so i might be able to order a good chunk of my stuff. Till then all feedback is welcome....By the way my dad thinks im Nuts!
-
Re: watercooling my lexa blackline
Just a tiny update for the moment being, i waited for the fresh paint to dry
then i installed the fan with four nuts
i test fitted the psu and it fit in perfectly, i think the fan looks nice but then again in the end you wont see it due to the fact it will be covered by the radiator. thats all for now
-
Re: watercooling my lexa blackline
heres a pic of the red led fan in place with the grill from my ex psu
and a pic from the side that shows the fan being powered by my old spare computer
Oh and when i looked at this pic i realized the door was still grey so i quickly went out and painted it, unfortunately i didnt have any black so i used a dark grey, sorry forgot to take pics
-
Re: watercooling my lexa blackline
yea it came with the g80 adapter plate but ugh...if im going to just take a picture i might as well update heres some pics ill update my other worklog aswell if anyone checks that one
heres one of thecard with the g80 plate on
heres one still has the plate on but you can see the holes for the block
heres all the parts on the floor
heres one of my Beautiful 700watt modular Kingwin powersupply
-
Re: watercooling my lexa blackline
yea i know its a wicked psu, anyways heres the pic
-
Re: watercooling my lexa blackline
ok my hunch was right and i got the block on the card
-
Re: watercooling my lexa blackline
Well wait no longer its here individual photos
My dual bay res
my 16 feet of tubing...oops
2 liters of black feser one
a fillport
my cpu and northbridge waterblocks
pump
and rad
-
Re: watercooling my lexa blackline
Small update: i have done what i can without my motherboard, speaking of i just got n email saying the folks at xfx have recieved it and is being tested .
top of the case
front with res
side with unfinished tubing and installed pump
Please comment
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules