Dragzon Case

[sherren]

Hi,i just joined TBCS today would like to share my case project.
started in 2005
:blush: Juz planned to start a case project,as a hobby
Welcome To My Worklog Project!!
cut into half

Finally started this project
Took off everything from my old i cute case and transfered to a temporary [enlight]case
which im gonna use for the project also[i cute case]

Drilling Out The Rivets

All the sections are dismantled.

Just bought CM Centurion 5 from Gadget Zone :drool:

more updates after my final exam around november
:unsure:
The theme of this case will be in flames[still thinking] and custom fan grills etc more plans coming

[sherren]

went to hardware shop to get some wires,led,switch

decided to start the psu mod :thumbs:

opened the psu and cut off the stock fans

fixed blue led fan

fixed cm uv fan

screwing cm uv fan on the Sunbeam Psu Uv reactive Case

Double sided tape the sunbeam psu uv reactive case.

Finally Is Done!

note: the crack on the sunbeam psu case is not by me,someone else............... :w

PSU Under UV light

[img]http://img288.imageshack.us/img288/7750/96ov.jpg[/img

[sherren]

Time to cut a window

Halfway cutting through

Separating the cd rom bay and the fdd&hdd bay[not using]

Finally Done,and just riveting the bar for the cd rom bay

still need to file and sand paper tommorow continue,

:thumbs:

Another Update for today :drool:
cut it into half

Taking off the part that i dont need

Riveting it

Finally Done,needs a respray

the case gonna plan for future use water cooling

[sherren]

Took a pic of the case got nth to do :o

due to my rotary tool[unknown brand] died.

anyway since i cant do any cutting work :cry: ,so i decide to do this strip off some stuffs ,since 1 week break do some mods :flex:
gonna spray int[black]and see what i can do

Done A Little mod for today
fixed the rubber legs from cm5 so there is a space for the ccfl,took off the ccfl from the CM ccfl tube and transfer it to a Rubber Tube as shown in the pic

Testing wether the ccfl is smash i guess,juz fit nicely :thumbs:

thats all for today, need to get 3/8 barbs,5 Black Spray Cans,silicon,epoxy glue :o $$$ :sweat:

[sherren]

Did a little mod Drilled holes for rivets,testing the rivets wether they fit

:thumbs: :flex:

juz cut off the honeycombs so better air flow

sry my cutting is not so perfect due using a drill :blush:

Finally got Rtx1 and Work Bench, and some stuffs

[sherren]

cut a hole so psu wires can go through

Received Some stuffs

Sleeving The Psu wires,Not Finished Sleeving yet

took off the top case part need to cut to make it as long as the centurion 5,noticed is longer abit the top case

Taking Off the top case

Cutting out the piece need to be cut

]

Very satisfied with my work today
really need a respray, still gotta find a way to rivet the Top Casing.

[sherren]

fixed cm 120mm fan behind

Planning to make the front panel

Took out the c5 badge from the centurion 5 front panel:p

Measuring the front panel

Continued
Doin some sleeving

Having Hard Time to cut 3mm arcylic :blink: ,halfway done

[sherren]

Cutted those bezels out

Done cutting the front panel bezel's file + wet sanding edges

Use epoxy glue to glue those sides

top panel glued, i know u can see fingerprints tomorow i will cleaned it off

Tested Fit

Update,fixin the electronic key hole

sprayed the inner part of the front panel

heres the finish product of the Front panel :drool:

can u see the reflections of the tiles? :thumbs: :drool:

[sherren]

anyway thanks,heres a close up of the front panel

sry for poor quality pics

fixed the top part arcylic,anyway gonna have a top blowhole for it and some designs later on,

close up wit better lighting

as u can see i sprayed the inner part black colour

more updates tomorow

Nothing just teaser's pics
just received
Vantec spec uv Led blue-green
2 fan grills
2mm 1ft x1ft arcylic
sidepanel.

:drool:

[sherren]

back under night,sry for blur pics

Still not satisfied with my top back panel.gonna redo again

Update For Today, note Tons Of pics today!

Bought some stuffs today,paint,the saw is for my project for KH [school project]

ok have a look at this pic,see the red circle i drawed,theres a gap,so im not satisfied.and i threw away the back panel arcylic!

heres what i did today redo the back panel

[img]http://img501.imageshack.us/img501/9510/img0672medium6sc.jpg[/img