hey guys this will be my third case on the go... it is because i have pieces of moditor scattered between two houses and i am still trying to get them all..
so here goes... project vento
as the name kind of states.... it will be extremely vented..
my base case is one my uncle bought me from an auction for $2!!!!
no pics... sorry
well first thing i did was drew up some pics for the front bezel idea.
this was on the 20th november
probably cant see that pic very well..
the next thing i did was strip the case of its parts... top, sides, bezel, fans, feet and other stuff
then i took a trip to the shops..
also got about 1.5m of railing stuff.. for the feet....
here is is cut into 4 strips.
then i taped of the side pannel... right one... left one is at dads for some reason.
drew out a design on the side pannels.
let me clear this up cuz some people dont get it
the side pannel will have the three holes cut out. then there will be about 2cm raiser then an alumi plate the same shape as the hole just an inch bigger.
this will be clear when i do it.
also marked out the top vent
then with my not so famous hammer and screwdriver technique i cut them both out
that is all for now... im a bit lost so ill do another post in a bit
total view of the case so far - feet