Knight Rider CWC

[marquee]

I got the pump no mounted. There will be a piece of plastic that will come over the mount to hide the metal. Thats the idea right now. As before this piece of metal is far from finished and will be more work.

[marquee]

Some more pics of the Turbo sanded after the spot putty. I think I need some more putty before I gets primer.

[marquee]

Ok first update in a while

[marquee]

This is the first put together. There will be many more builds before its finished.

[The boy 4rm oz]

I love that colour. Can't wate for it to be finnished.

[marquee]

Soon it will be finished. Well atleast the Knight Rider part will.

Then I got start work on the CWC part.

Some good news flew modders.

The turbo below, was chipped in the front and needed to be fixed. Also the holes at the top were to big. Well this morning I was trying out the AOC fans on the turbo and they fit perfect. I mean, they cover up the extra gap on the fan hole because AOC fan is thicker in size. This just means less work for me.

By tonight I should have the turbo finished in Bondo and hopefully primed. Also today I am going try and get the RAD mount bracket finished but that’s hard to do when I have no metal blade for my jig saw.

[marquee]

Here is the underglow effect finished. All I have to do is mount the transformer to the mobo tray. The witch is all wired up too. It looks so nice I toke like 10 pics.

[marquee]

I said I would try to do the Bondo work on the front so I did. Since I am so into the case right now might as well do more work before the work week begins? Ok here is what I did.
I first broke off the piece of plastic that was flapping.
Then I made a cardboard trace of the area needed to be filled.
Then cut a piece of plexi to that size.
Then I had to sanded the plexi so its the right thickness to fit in the hole.
When that was done I cleaned the area that I was going to epoxy the plexi to.
epoxyed the plexi to turbo.
Then waited for it to dry.
I am using anew bondo, this stuff is the carbon fiber stuff.
It has strands of fiber in it to make it stronger.
Also when dry its harder to sand.
I mixed allot of this stuff so I did the front and there was some small dents in the side so I filled them too..

[m4gnum]

I'm glad you're back posting updates, this is one of the reasons I signed up to bestcasescenario. Good work.

[Canadian Eh?]

nice table cloth. lol