Silver Eagle mod

[Nawl]

I havent done a mod yet BUT if i should do one it should look like this:

Any suggestions how i should do this?
Or any suggestions that i should start with something easier?
Maybe i wont pull it off ?

WRITE! :p

**EDIT**

I now changed the eagle in the front to the "FireBird" The Firebird is the logo on the h00d of a trans-am (the car)
BUT always there is a problem changing anything, because now i dont think the window fits... maybe it just should be a rounded square?

[crenn]

This should be a fairly easy but straight forward mod. The thing that will require the most work is the front panel, but remember you have the top and other side to consider.

[Nawl]

Okay...do you got any tips wich case i should use?
Or i maybe just start from scratch with an old case..

[crenn]

If you asking about cases, I'm not your guy, you're going to have to wait until someone else can recommend a case for you.

[Nawl]

Ok, but thanks anyway !

[Redbeard]

I don't have any suggestions about what kind of case to use (except maybe a pretty small case?) but instead my suggestion is about the 5.25 drives. The layout is nice and slick looking but it looks like you don't plan on stealthing the drives at all. Perhaps something as simple as a smooth uniform front to match the case and make it appear that there aren't any drives at all. Also if you wanted, perhaps the drive buttons could be rerouted somewhere else on the case front. And the buttons could be slender and maybe even taller than wide. Just an idea.

[Nawl]

Mhmmm

[AceX]

Heheh... screaming chicken...

So anyway, I kinda like it. I'm no really feelin' the side window all that much, but I can't think of anything to replace it with. Sorry...

[Aero]

I was going to say, that Eagle one the front looks similar to a firebird, but looks like you noticed that too :p

[HaWk16]

Lets see....

The layout is nice and slick looking but it looks like you don't plan on stealthing the drives at all. Perhaps something as simple as a smooth uniform front to match the case and make it appear that there aren't any drives at all. Also if you wanted, perhaps the drive buttons could be rerouted somewhere else on the case front. And the buttons could be slender and maybe even taller than wide. Just an idea.

this would work making the case more uniform. Also the wings that the bird is on can be acrilic, and if you want it to be even better, you can put a few leds behind the acrlic to make it seem red (or whatever color you would like)

just my 2 cents