Ok everyone im new to the community and would just like to take the time to introduce myself.
I am 18 years old and have been working with computer hardware, software, and most other gadgets and consoles. Electronics have always been my life but specifically computers. So anyhoo, the time has come in school for me to do my senior project, and since my english grade is a bit low I decided to go all out on this one. I may ask for some feedback, comments, and any advice would be great as this is my first mod, but I have a strong head for this and my ideas are possible.
I am going to be using a Silverstone PS02B case
painting the main parts of the case white, with a stripe on the side that angles down in the front and then a straight stripe that will be blue with deadmau5 in white (or plexi)
a blue deadmau5 head above with a plexi window mouth possibly a UV reactive window to make it glow
eyes aswell
large fans for ears
On the front:
a 6" LCD
stealthed DVD drive
4 switch cathode and LED switch
On the right side:
2 90 degree pvc bends in the same white as the case
a clear section of tube inbetween through which the PSU cables will run through and mobo cables for the fans and cd drives, etc.
Also putting LEDs or cathodes in the clear part.
Drawings coming soon!
Hoping for a good turn out as im putting the components from the PC ive been working on since I was 10 so im making this my final hurrah for that PC and using my old case for all new components when I graduate.
This will be a quick build, as I only have 4 weeks or so to complete this or get close enough to turn it in for my project.