Putting a Face to the Names

[Fear]

Alright, Spill the cokes, I'm Razors Edge. Admins know already. Here is my stang posted below. And no, The nerd picture isn't my real picture, but its funny as hell though.

Here is what i'm runnin,
Crate short block 302/347. V4 Crate supercharger. Flat top Keith Black (hyperustetic) pistons with valve relief.Crane cam:w/228 duration&.512 lift. Ford racing double timing chain. Edelbrock performer RPM alum. heads.Crane cams Chromenoly Heat treated Pushrods.Crane cams Energizer roller tip rockers.Weiand stealth dual plane alum. intake. Holley 650cfm carb with elec choke.Headman headers.Canton deep pan oil pan(front sump).Summit alum. timing cover.Milodon alum. high volume water pump.Ford Rcing alum. underdrive pullys.Summit 2 row alum. radiator.Mallory> unilite V.A. distributor.MSD blaster coil.MSD digital ignition amplifier box.Summit SFI approved harmonic balancer.B&M heavy duty flexplate held together with ARP fasteners(mostly).Transmission: ATI C4 street/strip tranny.TCI: 11" breakaway torque converter with 2400-2800 stall.hughs performance deep alum. pan.B&M: heavy duty alum. tranny cooler.B&M: Z-gate shifter.Driveline empire alum. driveshaft.REAR END: Currie enterprise reinforced 9" ford rear housing.Currie: 31 spline axles.Randys ring & pinion 9"center with 370 posi.
Rear suspension: 2 link chrome molly rear with heavy duty S spring leafs, shackle extentions and KYB low pressure gas shocks with polyurethane bushings, also has an oversized after market anti-sway bar.( that set up puts the power to the back!!!woo hoo!!!)Front suspension: stock upper & Lower control arms, new ball joints.Stock height front coils with oversize anti-sway bar and KYB low pressure gas shocks.Brakes: front power disc brake conversion and up graded 10x2 rear drums.(used on 4 barrel clevelands only) also new proportioning valve.Summit racing: 16 gallon fuel cell with sending unit, set into the trunk.Rear trunk mounted battery with approved hold down straps and remote batterie charge plugs on the back of the car.Also quick disconnect on battery.This car also has driveshaft loop.Sub frame connectors.Monte carlo bar under the hood(fender connectors) structure support.Crane cams vacuum canister with the guage.RCI race harnesses (both seats) and a Grant removable steering wheel.

At the time of the pics (late july or w/e) Me and my dad where trying to sell it, Get 20k or so, but no offers so we're keepin it. you can still see the 'for sale" Sign. Alright, so m ride doesnt really have good paintjob or ****, but next week shes going down to the body shop, working on a full black gloss paintjob, Then i'll see if i can get my hands on some good racing vinyls.

Beautifle ain't she?

[tybrenis]

She's a beauty Fear, too bad you're only 13 and can't drive. =(

[Mitternacht]

Any pics of the motor?

[GT40_GearHead]

well... could it be.... a felow gearhead..... hhhmmmm
i see you know your stuff, i like that

one question how do you feal about a flat plane crank shaft ?

[Mitternacht]

well... could it be.... a felow gearhead..... hhhmmmm
i see you know your stuff, i like that

one question how do you feal about a flat plane crack shaft ?

sounds like a broken dinner plate to me.

[GT40_GearHead]

lol nouuuuuuuuuu, not a plate lol

[DaveW]

Alright, Spill the cokes, I'm Razors Edge. Admins know already.

Yes, we knew, and as you were behaving we let it slide-but try not to make a mockery of the rules like this. We're willing to give you another chance, but we don't speak for the community. Hence the reason we didn't expose you or re-ban you, to give you a second chance without bias.

But...i guess you blew that one.

Everyone: The fact he went un-regarded for so long is a sign this user has changed their ways. Don't let past mistakes cloud your judgment, it might be nice to give him another chance.

-Dave

[Mitternacht]

crossplane crank shaft, personally.

[GT40_GearHead]

Here is what i'm runnin

crossplane crank shaft, personally.

should we start a thread for this :p

[Mitternacht]

Nah, I'm done.