Earth Defendor 3000

[Frenkie]

This is the worklog of my latest mod, loosely based on a flac gun, but with a heavy scienfiction theme draped all over it.
I hope a lot of Trekkies are watching with us, otherwise you might loose some of the treknobabble

Started doodling in Sketchup, also to determine some general measurements.

I tried to keep the base 13.7 x 13.7 inches, a rather standard size for PCs.

Set up the base from square chroom-teryon profile and two transwarp conduits.

It has a swivel possibility, for more accurate aiming of the isolinear tracking system...

[Espie79]

Yep, you lost me with the trekkie stuff, but the frame looks great. As I have never welded anything, can you file down the welding joint so it isn't so unattractive?

[Frenkie]

Yep, you lost me with the trekkie stuff, but the frame looks great. As I have never welded anything, can you file down the welding joint so it isn't so unattractive?

Right-o. The welds are still untouched, I need to be sure my construction holds up to what I have in my head. If I need to re-allign the module phase inductors, I rather do that before I spend a lot of time on finishing the welds.

[OvRiDe]

The Captain obviously approves!!!

Looking forward to another great mod Frenkie!

[AmEv]

Make it so.....

that my eyes pop out from pure awesomeness!

[Frenkie]

Oh you guys !


This showes a tritanium subframe on top of it, and two very heavy terminium cilinders on the bottom.

Mounted two very cool looking psilosynine actuators.

This is a nitrium subspace inhibitor-filter, spraypainted black for better heat-conduit.

Here it is mounted and it also shows a little bit of the PC front.

[Frenkie]

Started mounting the neccesary secondary transducer cables...

And the white and blue resonating polarization hoses...

The first transversale fluxbeam lasergenerator....

and the other three to stabilise the multibeaming subspace alpha-wave....

[Espie79]

wow, awesome work. This is art

[TheGreatSatan]

That's gonna be big

[Frenkie]

A multidirectional photon laser in centre position.

Connect it all with calibrated thalmerite hoses.

First evening/night setup to try and calibrate.

Aiming laser on.

(I see a fluctuation, so there is still a lot of work to do)