Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: No signal?

  1. #21
    Will YOU be ready when the zombies rise? x88x's Avatar
    Join Date
    Oct 2008
    Location
    MD, USA
    Posts
    6,334

    Default Re: No signal?

    Yeah, it's there. I would contact MSI and make sure that the BIOS version that you have supports it; it may have been added after your board was flashed. There should be a sticker on the BIOS chip that'll tell you the firmware version.

    If it's not supported on your current BIOS version, you could RMA the board or get a new BIOS chip from somewhere like BIOSman (I've had good experience with them) with the latest firmware.

  2. #22
    "Lemme Sho' Ya' Sumtin!!!" - FMB
    Join Date
    Sep 2009
    Location
    Dundee, Illinois
    Posts
    294

    Default Re: No signal?

    I thought about it and i'm probably just going to keep the MBB and use a different processor with it...that or sell it on ebay. I'll probably be going with a AM3 mobo like the MSI 790FX-GD70 or something a lil cheaper but still good.
    Project: Archangel Complete
    Project: Patron W.I.P
    Phenom II X3 710 2.6ghz, MSI 785GTM-E45, 2x2gb Kingston 800mhz, Hitachi 320gb HDD, OCZ StealthXStream 400w

  3. #23
    "Lemme Sho' Ya' Sumtin!!!" - FMB
    Join Date
    Sep 2009
    Location
    Dundee, Illinois
    Posts
    294

    Default Re: No signal?

    Wow, totally just realized that i have the wrong type of ram.

    4GB PC2-5300 Parity REG CL5 240-Pin 2 pcs/Kit
    Project: Archangel Complete
    Project: Patron W.I.P
    Phenom II X3 710 2.6ghz, MSI 785GTM-E45, 2x2gb Kingston 800mhz, Hitachi 320gb HDD, OCZ StealthXStream 400w

  4. #24
    Will YOU be ready when the zombies rise? x88x's Avatar
    Join Date
    Oct 2008
    Location
    MD, USA
    Posts
    6,334

    Default Re: No signal?

    doh! Yeah, registered RAM won't work on a board that doesn't support it.

  5. #25
    "Lemme Sho' Ya' Sumtin!!!" - FMB
    Join Date
    Sep 2009
    Location
    Dundee, Illinois
    Posts
    294

    Default Re: No signal?

    I was like wow, i am so stupid i was running around like a chicken with it's head cut off...and one little thing such as this that i didn't notice.
    Project: Archangel Complete
    Project: Patron W.I.P
    Phenom II X3 710 2.6ghz, MSI 785GTM-E45, 2x2gb Kingston 800mhz, Hitachi 320gb HDD, OCZ StealthXStream 400w

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •