Project "Vulcan"

[aidanscomputers]

Project Vulcan

This will be my main Gaming rig that travels to about 10-12 lan parties a year. It a micro atx case theme Black and Orange,

Some of my concerns was the dual 120 radiator. it doesnt fit any where in the case. not yet any ways (dremal time). Air flow was another concern. But i finally came up with a pretty simple solution, mount the raditor on the botton and have air blowing in from the top and through teh bottom. The Mb has been staying at a pretty constant 30c on the test bench for about a month. I will aslo be adding soem arylic ilumminated panels and case feet.

I am pushed on time on this one and have about 10 days to complete before I take it to a Lan party on the 11th . So get ready for metal & plastic to fly !!!!

Part list

1 NZXT Vulcan Case

1 EVGA Micro atx Sli MB
2 EVGA GTX 280s
1 Intel Core i7-965 Extreme Edition
1 Cooler Master 1000w Slient PS
4 XIGMATEK Case Fans orange and white leds
1 DD- Stealth GTS 240 Black Ice Radiator
1 DD-Single 5 1/4" Bay Reservoir
1 DD-CPX-Pro 12V Pump
1 LG DVD rewritable.
1 Mod/Smart Supreme System Sleeving Kit - Black
1 Mod/Smart 20 Station LED Board - Base w/ 10x LEDs - Orange Base / Amber Switch / Amber LEDs
1 Logisys 4" Dual Cold Cathode Kit - UV
1 Feser One Orange coolant
1 Orange Tubing
12 3/8” by 5/8” compression fittings
1 TDX CPU block with Orange top

Update #1
Disassemble the Vulcan Case

Needed to make room for the Rad

Well My wife told me to move all this stuff to the garage

But i didnt have any benches

So i went to the lumber yard picked up some wood Saturday
and built 2 new ones

the parts started to arrive.
One awesome Custom TDX CPU block from Danger Den

Some really cool Xigmatek Fans

A little test Fit
wow that aint going to work (lol)

Time to get the dreamal out

[aidanscomputers]

Update 2#

Making the first Cut for the Rad

Came out nice and Clean

Cutting out the botton for rad air flow

a little dusting but came out great

Test Fit

Looking good so far

More cuts on the front bezel to make room for the rad

made a small cut on the MB support for wire managmnet and room for the rad

break !!!! lol

[aidanscomputers]

lunch break is over
Side panal I didnt like the mesh

[imghttp://farm5.static.flickr.com/4132/4970215480_08009896da.jpg][/img]
So lets remove it , it left some nice scratches on the side

Few new cuts for the new panel

Pretty clean so far

u channel even makes it better

Very Happy !!!

Lets go cuts some plexi!!!

Lets add a little something

A steady hand

I am not confendent with my sand blasting yet, so the hand ecting will have to work

[aidanscomputers]

Update 3#
Case feet & Sleeving
Sunbeam case feet

What the hell are you doing !!!

I have a little differnt vision than the originals

More on this later but here a little peek

Sleeving

Why such a ugly blue !!!!

Prepping the Bench for 09/08

[msmrx57]

Why such a ugly blue !!!!

Rustoleum plastic paint can fix that.

[diluzio91]

i vote orange!!

[aidanscomputers]

I vote orange too, but it will be hidden. lol I love using the plastic paint from Rustoleum

[x88x]

That's a neat case...I like it. Too bad they didn't make it a couple inches taller though, or you could have put the radiator in the top. You might want to consider switching the direction of the airflow so it works with the natural flow of heat instead of against it. Overall looks like a good start though, should be good.

[SXRguyinMA]

lookin good!

[aidanscomputers]

I really wanted the rad at the top. I thought i could do it, I tried to scethc it out, There no room for the MB or the dvd roms or rez by adding it there but it would look like a case with rad on top. lol It really is a small case.