-
08-02-2010, 08:52 AM
#131
Re: Project - Air Cube v2
Thanks Jase, that 3 weeks flew by lol hope you had a good holiday mate , the case is almost done, once I have these panels made, painted & attached I'll be contacting the guy who wants to feature it in a mag to let him know it's finished , I just couldn't let it be featured knowing it could have been improved a bit here & there .
I admit the double layer looked good, but it disguised the pattern too much so since I'm yet to do the extra layer panels I thought I'd do a pattern that flows with the original ones, they could go above or below the originals, whichever looks best & sticking with the colours of the fans frame & blades, also decided to remake 1 of the top panels as it were not as good as the other.
So I have 5 panels to cut & sand, if I push myself I'll have the panels cut today & the sanding done tomorrow, but having said that the new patterns are less complex so should be a little easier.
Here is the side & top panel laid over what I'm going to do, I sure have my work cut out for the next days .
-
08-02-2010, 03:27 PM
#132
-
08-03-2010, 08:08 PM
#133
-
08-04-2010, 09:23 AM
#134
-
08-05-2010, 03:53 AM
#135
Re: Project - Air Cube v2
Phew, glad you guys think so , seems it's having a like it or don't effect on some people, but yeah I think it will look pretty sweet when painted, I guess modders are better at visualising what things would look like once done, someone also suggested polishing the primary layer & painting the secondry layer the same colour as the case, I do admit that would look pretty sweet but would be very dificult to do & a pain to maintain, chrome plating came to mind to make it an easier & supremely better looking option but don't have the budget to do that & don't have a lot of faith in the postage system especially for things I've worked hard on, paint just requires a bit of dusting now & again , chrome plating is something I'll be finding more about though for my future builds instead of polishing, I'm not too keen on polished alu to be honest, but chrome plating could be fantastic, alu needs treating with something before it can be chrome plated so I'd expect it to not be cheap.
Back to the project I filed & sanded the inside borders of the primary side panel layers so they'll look that smidge better when it's done, so just waiting for the paint now.
-
08-06-2010, 06:10 PM
#136
Just a status update this one.
Thanks for the tips Jase .
Just a status update this one.
Got the paint yesterday, the layer panels were already prepped so primed, sanded, coloured, cleared them all, went to install them today & had a couple of face palm moments .
I put the side panels in the wrong way round, but carried on taking pictures then thought midway through taking the pics all the effort I've put into this & I'm doing that lol so took them off & put them on the right way & heres the other face palm moment, I painted the wrong sides of the secondry layer on the sides so the patterns didn't line up as planned, very glad I ordered 2 of each colour, whipped them off & painted the other sides, should be good to go tomorrow lol .
The difference in the 2 shades of blue isn't much to be honest but still looks good, I think the only way I'm going to get pictures done to do it justice is if I make a cheapo photo boothe, the light in my room makes my photography & the case look shoddy & with it being finished I want to get as good of quality pictures as possible with my camera to finish this log off .
Bit the bullet & just ordered the ingredients for a cheapo makeshift photo boothe.
3 light fittings which can clip onto things
3 daylight bulbs
a clothes line
a plain white shower curtain
a big piece of black fabric & white fabric to see which is best looking.
£46 all ordered so should hopefully have some sweet finished pictures incoming by next week .
I could post some pictures tomorrow but I'd rather post good quality pics once I have the boothe made , it's about time I upped the photo quality .
-
08-07-2010, 03:53 PM
#137
Re: Project - Air Cube v2 - 49 finished pics
LOL, not a lot goes to plan & waiting for the bits for a photo boothe is no exception .
I remembered I had a couple of sheets of white foamboard that I originally bought to make a big photo boothe but didn't end up making it. Did want to take the case outside but were no sign of at least dry weather so I experimented & got a bright idea of using the light coming into my room as good as possible combined with my kodak easyshare z950 & a tripod.
So the bits I ordered for making a photo boothe won't go to waste, not at all, it'll all be perfect for any future project logs .
Placed a sheet up against the north faced wall so it could catch the light coming from the south, taped it to furniture, placed the other sheet on the floor, placed a lazy susan on it so I can easily swivel it around to catch all angles & took 151 pictures lol , a lot to cherry pick in that lot, got down to 49 cropped pics, should probably do some more picking to slim the post down but no I'll just post them, sorry if it's too many but wanted the pics to capture what it really looks like.
On with the daylight lazy susan foamboard enhanced 100% finished pics of the Air Cube woooo.
And finally the photo boothe lol & the mess I need to tidy & clean .
Massive thank you to all who tuned in to view & comment, happy modding all, I have no idea what I'll make next but I'm sure an idea will pop into my head in time .
Link to original thread.
Last edited by Drum Thumper; 08-07-2010 at 07:21 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules