Well I made some more progress today!
I started with a flame image found on google, then stretched it, outlined it and took the color out to get this:
I printed this out and cut it out to mark off the case like so:
Now due to paper size restraints I extended the flame a bit when I trace it to the case:
And started cutting it out:
center][/center]
And with a combination of jigsaw and Dremel I got it all cut. I broke off two small parts though. The wood was very brittle from being so old, and the parts just shattered at the thin points to the point where I wouldn't have been able to glue them back on.
I then glued cloth to 4 of the 5 walls. I still need to cut out the VGA I/O ports before I glue the backside on:
I also sleeved the wiring for the 120mm intake fan:
I also trimmed the pc panel to the proper size. All I need to do with this is mount it. I may also do some kind of etching, we'll see
The last thing I did was paint all the bare wood with some flat red enamel model paint. I was thinking about leaving it bare, but it didn't fit with the theme.
That's all for now! Stay tuned