Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: My first airbrushing attempts.

  1. #1
    If you can't hack it, you don't own it! Oneslowz28's Avatar
    Join Date
    Mar 2007
    Location
    Aiken, Sc
    Posts
    5,084

    Default My first airbrushing attempts.

    I just wanted to start this thread so I can get some help from everyone. A week ago I attempted some torn sheet metal with a checkered flag under the metal while following Ed Hubbs video on it. Well I didn't make it past cutting out the flag squares as I cut into the paint. I was also using layered masking tape instead of a decent sized transfer tape. So before I try that again I have to wait on my 8" transfer tape to arrive.

    In the mean time, I wanted to try my hand at a cloudy sky scene with the clouds drifting over the sun kinda deal. This is my first attempt at anything other than daggers and dots. I also am using a very cheap dual action brush and createx paints that are thinned with the home made thinner recipe that SgtM posted.

    So here is my first attempt, please don't laugh...(seriously don't laught...I have a ban button! :p)


  2. #2
    If you can't hack it, you don't own it! Oneslowz28's Avatar
    Join Date
    Mar 2007
    Location
    Aiken, Sc
    Posts
    5,084

    Default Re: My first airbrushing attempts.

    And attempt #2


  3. #3
    Mostly a nutcase CorsePerVita's Avatar
    Join Date
    Mar 2008
    Location
    Oregon!
    Posts
    426

    Default Re: My first airbrushing attempts.

    not bad not bad!

  4. #4

  5. #5
    If you can't hack it, you don't own it! Oneslowz28's Avatar
    Join Date
    Mar 2007
    Location
    Aiken, Sc
    Posts
    5,084

    Default Re: My first airbrushing attempts.

    Thanks Rick! I am going to do some more later this week.

  6. #6
    Resident 100HP water-cannon operator SXRguyinMA's Avatar
    Join Date
    Jun 2008
    Location
    MA
    Posts
    5,865

    Default Re: My first airbrushing attempts.

    holy crap nice work!

  7. #7
    If you can't hack it, you don't own it! Oneslowz28's Avatar
    Join Date
    Mar 2007
    Location
    Aiken, Sc
    Posts
    5,084

    Default Re: My first airbrushing attempts.

    Thanks Will! I am considering ordering a few stencils. Maybe some skulls, and maybe some fire sets, and some steam punk / mechanical stuff from AirSick.

    @ CorsePerVita Thanks man!

  8. #8
    Overclocked Lothair's Avatar
    Join Date
    Nov 2010
    Location
    United States
    Posts
    362

    Default Re: My first airbrushing attempts.

    Hey that's pretty good. I haven't seen too many better first attempts.

  9. #9
    If you can't hack it, you don't own it! Oneslowz28's Avatar
    Join Date
    Mar 2007
    Location
    Aiken, Sc
    Posts
    5,084

    Default Re: My first airbrushing attempts.

    Thanks Lotair

  10. #10
    Mostly a nutcase CorsePerVita's Avatar
    Join Date
    Mar 2008
    Location
    Oregon!
    Posts
    426

    Default Re: My first airbrushing attempts.

    lookin' good man! you'll be rockin' it in no time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •