Page 11 of 17 FirstFirst ... 678910111213141516 ... LastLast
Results 101 to 110 of 161

Thread: Maximum Security

  1. #101
    baaah. billygoat333's Avatar
    Join Date
    Aug 2007
    Location
    Idaho
    Posts
    3,331

    Default Re: Maximum Security

    That sleeving looks smexy.
    Quote Originally Posted by Omega
    ber is id elicous
    Centurion 5 Mod <<--- ON HOLD FOR THE WINTER

  2. #102
    Its not cool till its watercooled. Fuganater's Avatar
    Join Date
    Oct 2007
    Location
    Kinshasa, DRC
    Posts
    2,843

    Default Re: Maximum Security

    Looks great! I'm uber jelous for the WC RAM XP

  3. #103
    100% Recycled Pixels. Twigsoffury's Avatar
    Join Date
    Jan 2006
    Location
    Oklahoma city
    Posts
    2,017

    Default Re: Maximum Security

    man its all coming together!!

    think some black velco straps around some of those sleeved cables would look nice? (like on the video card)


    Really like the red led's around the mainboard and the UV lights in the blocks and such.


    them UV lights actually ought to help kill off microbes in your water system lol!

  4. #104
    Resident 100HP water-cannon operator SXRguyinMA's Avatar
    Join Date
    Jun 2008
    Location
    MA
    Posts
    5,865

    Default Re: Maximum Security

    I actually put some small black zip ties on the VGA cables to clean them up a tad, they look much better now lol. As far as microbes I don't think I'll have that problem with the fluid Kayin is sending me

  5. #105
    Why must hard drives fail together? TheMainMan's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    804

    Default Re: Maximum Security

    Love the shot of the PSU with the warranty sticker broken! Do you get a deal with MDPC-X or something? It seems pretty pricey to me to do a whole system in single sleeve with shipping from Europe. Granted it does look better than anything else out there.
    Build is coming together nicely, should look awesome when it is finished!
    TheMainMan

  6. #106
    Its not cool till its watercooled. Fuganater's Avatar
    Join Date
    Oct 2007
    Location
    Kinshasa, DRC
    Posts
    2,843

    Default Re: Maximum Security

    @TheMainMan - Its only $0.22 per foot + about 9euro for shipping. Whole system sleeved for around $80. Where other sleeving is $0.59 or more per foot making sleeving a whole system well over $150.

  7. #107
    Why must hard drives fail together? TheMainMan's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    804

    Default Re: Maximum Security

    Ahh, thanks for the explanation. I hadn't priced out other sources beyond the cheapo kits at a local store (I use them for builds for people who don't care about interior looks). I've been looking at the MDPC-X stuff for a long time but haven't been able to justify that kind of cost while still being a student, so I just get to drool over the pictures of those of you who can
    TheMainMan

  8. #108
    Resident 100HP water-cannon operator SXRguyinMA's Avatar
    Join Date
    Jun 2008
    Location
    MA
    Posts
    5,865

    Default Re: Maximum Security

    the MDPC-X stuff is only like $0.20USD/foot lol it's CHEAP

  9. #109
    Resident 100HP water-cannon operator SXRguyinMA's Avatar
    Join Date
    Jun 2008
    Location
    MA
    Posts
    5,865

    Default Re: Maximum Security

    I put some zip ties on the PCI-e cables to clean them up a bit



    I also picked up these sweet aluminum hose clamps for all the 3/8" tubing. I wanted the same ones for the 1/4" but they were all out, so I got the standard plastic clamps









    I picked up this Bitspower radgrill for the rear fan



    But the green wasn't cutting it so I painted it to match the rest



    I also got a pair of Lian Li blank 5.25" drive covers and some military switches.



    I taped, marked, drilled and mounted everything





    The other holds a 16x2 LCD and a Bulgin button.





    I decided to go with a single LCD versus the 2 for simplicity's sake, and the fact that I only really needed one anyways. I also painted both panels to match as well.



    Now I figured I'd do something different with the 1/4" clear tubing for the RAM. I wanted them to do something rather than just be there. So I tried some different routing setups and settled on this one. I cut up some spare plexi I had laying around, sanded, drilled and painted, and here is the end result. This will look sick once the fluid is in there








    That's all for now. I've been working a lot with the coding for everything lately. All that's left to do really is finish the switch wiring, finish the airbrushing and integrate the flow meter into the coding one the system is up and running!

  10. #110
    Resident 100HP water-cannon operator SXRguyinMA's Avatar
    Join Date
    Jun 2008
    Location
    MA
    Posts
    5,865

    Default Re: Maximum Security

    Another update

    I designed, etched and assembled the 2 circuit boards I'll be needing now that I'm only using 1 LCD. One board will house the ATMega328 and all it's associated components as well as have all the I/O pins for the accessories. The second board will mount to the LCD directly and allow me to use a 2x5 ribbon cable instead of the breadboard-friendly layout as the LCDs come.

    I used Fritzing to create the layouts and the PCBs.

    I started off by laying out everything in the breadboard view.





    I used that to create the PCB layouts as seen here. From the breadboard point to the ready-to-print PCB point was about 2 hours. This consisted of moving parts around the boards to get the best possible layout.





    Next I created etchable .pdf's (done with Fritzing) so I can print out the boards. You'll notice one side is mirrored. This is because when you transfer the image it'll come out oriented correctly.









    Here the boards are printed out and cut out. They are printed with a laser printer onto inkjet photo paper. The reason for this is that the toner, which is plastic, will not adhere to the inkjet photo paper. This will allow it to be transferred to the copper clad with an iron.



    Here are the top sides all transferred.



    Here I've drilled a set of holes and inserted pins through them. I use these pins to line up the back side traces for transferring.



    Fast forward a few steps and you've got a pair of freshly-etched and drilled boards ready for assembly! The blobby-ness on the traces is from a sharpie. If you get mostly good transfer but have a few little patches where it didn't stick you simply use a sharpie to draw it in. It works as an etch resist almost as good as the toner itself.









    And here we have the pair of completed boards. I still need to test these to make sure they're working 100%




    That's all for now!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •